Question about Oregon Scientific WW338H Weather Station Cordless Phone

1 Answer

Operating Instructions Model No BA218

I have an Oregon Scientific weather station Model No BA218 and lost the operating instructions . would someone be able to assist please.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Setting the time and calendar
1. Press the [TIME] button once to enter Time Mode. The display shows the current time with hour, minutes, and seconds digits.
2. Press and hold the [SET] button for more than one second. The "Hour" digits of the time will begin flashing.
3. While the "Hour" digits are flashing, press the [^] or [down] button to set the desired hour time. Note: Press the [^] or [down] button once to advance the setting forward or backward by one digit. Pressing the [^] or [down] for more than one second will accelerate the forward or backward setting at a higher rate.
4. When the desired hour time is reached, press the [SET] button again. The "Hour" setting will be confirmed and the "Minute" digits will begin flashing.
5. While the "Minute" digits are flashing, press the [^] or [down] button to set the desired minute time.
6. When the desired minute time is reached, press the [SET] button again. The "Minute" setting will be confirmed and the "Year" digits will begin flashing.
7. While the "Year" digits are flashing, press the [^] or [down] button to set the desired year.
8. When the desired year is reached, press the [SET] button again. The "Year" setting will be confirmed and the "Month" digits will begin flashing.
9. While the "Month" digits are flashing, press the [^] or [down] button to set the desired Month.
10. When the desired month is reached, press the [SET] button again. The "Month" setting will be confirmed and the "Date" digits will begin flashing.
11. While the "Date" digits are flashing, press the [^] or [down] button to set the desired Date.
12. When the desired date is reached, press the [SET] button again. The "Date" setting will be confirmed and the calendar setting is complete.

Posted on Feb 10, 2010

  • Sandra Jun 29, 2012

    After a lot of frustration my husband suggested the internet and voila' the directions came up, the clock is set, and he is happy, happy, happy. Thanks a bunch!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Oregon Scientific weather radio. I have lost instructions and am try to figure out how to set alert status by counties.


From the Oregon Scientific site top ten questions: click the link below to download the manual for the model number of your radio:


Manuals XF

Apr 08, 2015 | Oregon Scientific Audio Players &...

2 Answers

Oregon Scientific WMR86A wind sensor does not communicate to the base station. It is a new device, first time assembled.


I believe the wind sensor is a rotating cuff that has a wire which needs to input into the main reader or the wifi unit.if it's the wifi unit you need to check the receiver is picking up the signal.if it's the main readout then check the connection.if it is wireless, you may find a switch on the transmitter to change channel.this may fix the problem, especially if the receiver is near other wireless or bluetooth equipment.

Feb 19, 2015 | Oregon Scientific WMR86A Backyard Pro...

1 Answer

Oregon scientific model no rar186 how to set up outdoors sensor


I have had this Oregon Scientific model RAR186 unit for years and it works great. The only issue I ever have is when the batteries need to be changed in the remote sensor unit (Oregon scientific model #THN122). It never fails that once I change the batteries that the unit does not send a signal to the base unit. I will often hit the reset button and change the channels on the remote sensor before I finally remember that you need to do the following to get the sensor to talk to the RAR186 base unit:

On the base unit (RAR186), hold down the CHANNEL and MEM buttons for at least two seconds.
You will then see a graphic appear above the channel number that shows that it is searching for the sensor.
Within a minute, you will then see the temperature displayed for the sensor showing that they are communicating.

This is buried in the manual that you probably discarded as did I.

Apparently, if your sensor is broken, you can either search to find a new sensor of the same model or also use the following sensors: THC138, THGR122NX, or THN132N
I have not needed to replace the sensor as once I found the instructions to reset the communication between the sensor and base unit, all was fine. Hope this helps someone. I wrote this instruction using a Sharpie on the inside cover of the sensor since you have to remove 3 screws to replace the AAA batteries (2) in hopes I will remember next time and not waste my time searching the internet and not find the answer. Good luck!

Apr 02, 2013 | Oregon Scientific Measuring Tools &...

1 Answer

Model no 217s31 does not display outdoor temperature reading.


As much as it sucks to do, you have to reset the base and the temperature sensor. When you do it, keep the temp sensor next to the base until the base recognizes it.

Mar 11, 2013 | Oregon Scientific BAR386 Wireless Weather...

1 Answer

ONLY SHOWS INDOOR TEMPERATURE DOES NOT SHOW OUTDOOR TEMPERATURE


I have a similar device and the instructions say to remove batteries from both units and wait for 10 minutes without pressing any buttons before installing batteries first in the remote unit then the indoor unit. The outdoor and indoor units have to "talk" to each other before getting in the mood to display temperatures.

Feb 03, 2013 | Oregon Scientific Wireless IndoorOutdoor...

1 Answer

Oregon Scientific Weather Station


Choose the appropriate model from
http://www2.oregonscientific.com/service/manual_downloads.asp?t=3&cid=2

Apr 15, 2010 | Oregon Scientific Lwb0997110113004...

1 Answer

Lost the instructions to program my weather radio.


Just follow the link below. I just this PM downloaded it for the same reason. All you need is Adobe Reader to read or print it: http://site.ambientweatherstore.com/Manuals/wr102.pdf Regards, Craig Starr Danville, NH 03819 dts_cjs@hotmail.com

Feb 13, 2007 | Oregon Scientific WR102 Weather Radio

Not finding what you are looking for?
Lands Phones Logo

920 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oregon Scientific Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

4986 Answers

yadayada
yadayada

Level 3 Expert

71525 Answers

Are you an Oregon Scientific Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...