Question about Panasonic TH-42XVS30U 42 in. Plasma HDTV

Open Question

Panasonic TH-42PH9 id blowing fuses

I have a Panasonic TH-42PH9. I was watching tv and the screen just went blank. I opened the back up and found 2 blown fuses. I replaced the fuses, and now when I turn the tv on, the green light comes on but there is no picture. I cant get the remote to do anything to the tv, and it never goes to stanby by mode. It is like the tv does not come on fully....I need some advice please

Posted by on

6 Suggested Answers

  • 4 Answers

SOURCE: The green light on for 2 seconds and off again (Panasonic TH-42PWD5UY)!

PROFESSIONAL REPAIRER OF:
* cd-vcd-dvd-ld player.
* colour tv, Lcd/plasma tv.
* projection tv.
* prologic AMPS
* Grill/microwave oven's
* Digital proffesional camera.
* Digital camcorders.
* LCD/Digital projector.
* Hi-Fi music system.
* FAX machine.
* printer/scanner/copier.
* play station (PS1-PS2).
* X-BOX360.
DIAL..........: 9820380682

Posted on Jan 23, 2008

  • 1 Answer

SOURCE: The green light on for 2 seconds and off again (Panasonic TH-42PWD5UY)!

My plasma tv ONLY show green light for maximum of 2 seconds and off Itself again which means NO PICTURE, NO SOUND !

Posted on Jan 27, 2008

SOURCE: Panasonic TH-50PZ Plasma TV won't come on.

I had the same issue twice with a TH 42PWD5. turns out it was my UPS that was killing the switching power supply. Warranty covered it but when I removed the UPS not a single issue in 3 years. 

Posted on Jul 01, 2008

  • 3 Answers

SOURCE: Panasonic TH-50PZ Plasma TV won't come on.

what is a UPS?? mines doing it too

Posted on Oct 05, 2008

  • 53 Answers

SOURCE: (panasonic TH-42PZ77U plasma) the tv will power on

in protective mode the tv does not turn on and light is blinking, typically we must proceed by elimination as some faulty sections are preventing the tv to switch on. unplug the output power connectors from the power supply until the latter stop clicking. if it is still clicking after every of the output rail have been disconnected, then the power supply itself is faulty.

hope this helps!

Posted on Mar 21, 2009

smarthome2
  • 1114 Answers

SOURCE: Our panasonic th-42px60u will not turn on. It went

Un plug it, let it set for 5 min or so then plug it back in. If it's still out, remove the back panel and check the fuse near the AC input. If you need more help, post a comment and I can help some more.

Posted on Jul 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

No power to set no led lights blinking


Could be an open internal fuse or power supply failure

Sep 06, 2016 | Panasonic Viera TH-42PX80U Plasma TV

1 Answer

HDMI STOPPED WORKING PANASONIC TH-42PV500B


I had a same issue with my Panasonic TH-42PV500B plasma television. I tried everything which is written above and can be found on different websites. Finally I decided to replace the HDMI Board itself. I was able to buy a used one on ebay, it was only 13 pounds with postage.It is relatively easy to remove this HDMI Board. You should just unplug the TV and remove all of the screws form the back which are fixing the back of the TV to the frame. There are plenty of screws. You should remove all of them! Remove the backplate of the TV. After this you can remove another metal plate from inside, which covers this HDMI board - 4 screws. After you can remove the HDMI Board - only one screw holding it to the main board. Replace the new one back and put back the cover plate and the back of the TV. And it is working. 10_19_2012_3_10_22_pm.png Panasonic 42 Plasma TV TH-42PV500B Part HDMI Board Order number: TNPA3626

Apr 11, 2012 | Panasonic Flat Panel Televisions

1 Answer

50" panasonic. how to fix


after loading facebook the welcome screen does not appears

Jan 15, 2012 | Panasonic Viera TH-50PZ80U Plasma TV

1 Answer

Wife was watching TV - went blank. Won't turn on. Now 10 flashes.


would love to know if your problem was fixed - ours went out only 3 years old.

Aug 02, 2009 | Panasonic TH-42PX60U Television

1 Answer

My TH-42PX6U TV went completly dead


Ok, I hope to save you a lot of money. I finally figured it out. There are a lot of hints on the web. Once you get it fixed you will regocnize them. So here is what I did. Had to order the 2 fuses for the main power board from panasonic. The fuse number is K5D802BNA005. You only need two. Once I changed the 2 fuses I go the tv to power up but the red light blinked 10 times. This indicated there is a power problem.
There is a high probability the P board is bad. You can check this by checking th voltage on the number one pin on the p10 connector. TO do this you have to measure the voltage as you power the TV up. you should get 14 volts. if not the board is bad. I bought one on Ebay for $120. Put it in and it works. good luck.

Feb 25, 2009 | Panasonic TH-42PX60U Television

1 Answer

Panasonic Viera TH-42PZ800A


found this on a few comments
Once deselect the IFC, the picture for watching footy is magnificent, otherwise the ball flickers

Jul 21, 2008 | Panasonic VIERA TH-65PV500 65 in. Plasma...

1 Answer

Panasonic TH-50PX60U 50 in


Try to open the back cover and remove the SD card cable from the connector.

Dec 28, 2007 | Panasonic TH-50PX60U 50 in. Plasma HDTV

Not finding what you are looking for?
Panasonic TH-42XVS30U 42 in. Plasma HDTV Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

charlie rodriguez
charlie rodriguez

Level 2 Expert

151 Answers

Are you a Panasonic Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...