Question about Epson (V13H010L34) Projector Lamp for PowerLite 76c, PowerLite 62c, PowerLite 82c

2 Answers

Projector Lamp is flashing Red

We installed the 76c powerlite projector bulb, for the EPSON PROJECTOR, and we keep getting that annoying flashing red light. I know that Red indicates a problem, however, I just don't know where the problem lays... PLEASE HELP

Posted by on

  • Anonymous Mar 13, 2009

    Upon powering up my emp-82C (which i believe uses the same lamp) i get 5 green led flashes followed up by a flashing and solid red lights indicating that the bulb is blown, burned out or not is seated correctly. I replaced it with a new (260dollar) bulb and i get the same results as if i hadnt replaced it. Ive been told several times that the lamp hours need to be reset but thats hard to do when the projector does not project. I tried using the EMP 211 link with both the usb and the serial cord.......registered the damn thing so the emp 211 will display the projector and still NOTHING. IS THERE ANY KIND OF HARD RESET USING THE REMOTE AND A COMBO OF BUTTONS THAT YOU HOLD DOWN OR A NUMBER OF SECONDS THAT SERVES AS A MASTER RESET TO FACTORY SETTINGS OR ANY TECHNICIAN HOTKEYS IM DYING OVER HERE. It figures that i have all docs, booklets, quick guides,remote, cd and the piece of paper that the warranty roadservice card came on BUT CANT SEEM TO FIND THE FRIKKN CARD ITSELF. Which I dont think It even matters becuz its out of warrantee anyway.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I had the same problem with my Epson S7. Turns out that I needed to turn on the high altitude settings which increases air flow.
Details are here if you're interested.

Posted on Oct 16, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 62 Answers

If you know how to open the unit, try fixing its ventilation. flashing bulb light sometimes mean an occurance of overheating. try to clean all the fans and the air vent.

Posted on Mar 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The indicator of temperature is red, the indicator of the bulb is off and the fan after 3 o 5 minutes


PowerLite 7800p Multimedia Projector - Epson

www.epson.com/cgi-bin/Store/support/supDetail.jsp?...oid...

EpsonPowerLite 7800p Multimedia Projector. Support ... Indicator Light, Status, Description... Temperature, Red, The projector is overheating, which turns the lamp off ...

PowerLite 735c Multimedia Projector - Epson

www.epson.com/cgi-bin/Store/support/supDetail.jsp?...oid...

EpsonPowerLite 735c Multimedia Projector ... Indicator Light, Status, Description ...Lamp/Temperature, Red, The projector is overheating, which turns the lamp off ...

Maintenance Indicators - ManualsLib

www.manualslib.com > ... > Notevision PG-F212X > Operation manual
The warning lights (power indicator, lamp indicator and temperature warning... ... Redon. Normal (Standby). Green on. Normal (Power on). Red blinks. Abnormal ... Sharpmultimedia projector model xg-mb67x-l operation manual (71 pages).

Dec 14, 2015 | Office Equipment & Supplies

2 Answers

Epson 7800P projector?


Please dont use cheap alternative Lamp Bulbs in Epson. There are issues where the cheap Bulbs draw more current and damaging the circuit board.

Apr 22, 2014 | Office Equipment & Supplies

1 Answer

Changing the bulb on a epson powerlite


Original lamp USD110

Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry
Lampdeng Limited

Apr 11, 2012 | Epson (V13H010L34) Projector Lamp for...

1 Answer

Does the epson 82c have a reset button? There is no power


there is not the reset button on Epson 82
maybe the powersupply is fault
pls check it

Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry
Lampdeng Limited

Jan 04, 2011 | Epson (V13H010L34) Projector Lamp for...

1 Answer

Epson 76c, replaced lamp, doesn't come on, then replacment light comes on and high temp comes on, is there a reset i'm missing?


you did a goog job, there is nothing missed

Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color

wheel,
motherboard, powersupply ... with high quality and competitive price.
Lampdeng Limited
Jerry

Sep 09, 2010 | Epson (V13H010L34) Projector Lamp for...

2 Answers

Epson 76C projector that the picture has no red color to it. I have tried the adjustments as described in the manual but no success. The blue and green is great but no red? Thank you.


Youve probably got something gone wrong with your dlp chip with the million mirrors on it, see when the mirror tilts away from the light you get a black shade- tilted toward light lighter shade now throw the color wheel in which gives you color youve got green and blue so the color wheel is fine. Now how to replace chip? Dont. Look for a digital board or video board replace that and that should take care of ya. Good luck hope this helped ya-

Aug 22, 2009 | Epson PowerLite 76c Multimedia Projector

1 Answer

EPSON POWERLITE BULB REPLACEMENT PROBLEMS


ok
look at your users manual.
all epson models need to have lamp life reset befor the lamp will light.

I have had this same problem befor.

Daniel.

Jan 11, 2009 | Televison & Video

Not finding what you are looking for?
Epson (V13H010L34) Projector Lamp for PowerLite 76c, PowerLite 62c, PowerLite 82c Logo

2,912 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18375 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Cindy Wells

Level 3 Expert

4916 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...