Question about Sanyo DS31590 31" TV

2 Answers

Turned blurry with brilliant colors

Goes on this way for days, sometimes weeks ..may snap out of it for a day or week....Bright colors but very blurry. Changed cabels, Digital boxes etc...no luck. Only about 5 years old.Paid $700 new for it.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 57 Answers

This is caused by a device on the television called the "flyback". It is the most dangerous part on the TV and should be set by a trained technician. What is occurring is the flyback is going in and out of it's correct setting by the device that sets the voltage output of it. It is called the Focus Foyer or similar flyback control. Take it to a technician. Have him give you an estimate - I usually set the cost of repair to 50% of the original cost of the unit - beyond that it would be cost INeffective. Hope this helps
Len

Posted on Feb 28, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

This is not connected about the changed cables,digital boxes.the problem of your television is in focus of picture tube. you cannot adjust this because of some problem in tube.find a right technician so he can fixed this one.

Posted on Feb 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Color has gone fist to green then to red Before the color there would be a pop with a flash off and on for 3 - 4 weeks. Then there was a louder pop and the screen turned green. There still was some tune...


This can be due to sparking from the EHT and so it is important that you open the set after removing the power to check. Clean the EHT, the HT wires and the CRT anode on the tube.
The pop might be the spark and guns seem to work with a bias when this happens, check on the CRT board on the base of the tube.

Oct 27, 2011 | Sansui DTV2760 27" TV

1 Answer

I have a 32 inch toshiba tv that sometimes won't turn on for days


You may have bad solder joints inside and around the power supply or deflection circuit. Whit the power on try to hit the side of the set to see if it makes a difference.That would confirm the problem.
Hope this will help Good luck.
Please do not rate this answer(unless it helps) as it is only a suggestion.

Dec 03, 2009 | Televison & Video

1 Answer

TV looses color


Hi! try checking for some loose solder on the crt. socket.

Sep 17, 2009 | Aiwa F2000 20" TV

1 Answer

Lightning changed colors on my TV


You need to degauss the CRT, there is a built in degaussing coil but its needs more power . this is simply magnetizm that needs to be removed . see if you can before a coil somewhere.gd lk
Eric

Aug 21, 2009 | Toshiba 32A33 32" TV

1 Answer

Have to push power repeatedly to get TV to turn on, b&w picture


the CRT is obviously very old and discontinued ,I would recomend investing in a new set

Jun 11, 2009 | Televison & Video

2 Answers

Blurry edges


I own the same model of tv and have owned it for over 1.5 years. I moved with it twice. I had this problem about a month ago. On both vertical sides the screen became very fuzzy, yet the center remained clear. When turning the tv off and on I also noticed very wierd red, green, and blue lines streaming across the screen before the picture comes up or after it fades. I found no solution or cause to the problem. But I had two "long-boy" speakers from my panisonic 5.1 surround sound system setup right next the tv on either side. I set the center channel on top of the tv with the receiver on the shelf below. I thought well maybe some how the speakers were cause some sort problem in the tv. I moved the side "long-boy" speakers from directly next to the tv to about 6" away and removed the center speaker from the top of the tv. After several days of normal use of this configuration, the tv turned like normal and the fuzzy edges were gone. The symptoms lasted for around two weeks, and the several days after I moved my speakers. My only guess is that without a deguassing feature, it took several days for the magnitism to return to normal after repositioning my speakers.

Mar 17, 2008 | Samsung SlimFit TX-S3082WH 30" TV

1 Answer

Sudden color/picture distortion


you have a shorted green CRT that is affecting the other crts the short is internat to the crt that leaves what is called retrace lines. if the set is more than three years old then replace all three guns.

Feb 25, 2008 | Samsung TX-R3080WH 30" TV

1 Answer

Sony TV with blurry picture


blurry picture is mainly due to focusing voltage is not proper. solution 1 check & adjust focus control on flyback. 2 check crt base for loose. 3 wire going to focus control on crt base got disconnected due to foreign materials deposit on it. 4 if tv is old possibility of crt getting weak.

Sep 20, 2007 | Akai CF2791 27" TV

1 Answer

MITSUBISHI WS-65908 red crt going off and on


You don't have enough soder on the STK392-570 unit ! I had to re-soder mine and is OK now

Aug 02, 2007 | Mitsubishi WS-65908 TV

1 Answer

Screen goes from blurry to clear to blurry


The first thing to check is for loose conections,the problem is related to the high voltage but it can start in the main board with one component loose,when the high voltage is developed it goes to what is call the distributor block,a lot of sets have the focus and screen controls coming out of this block for each picture tube,this block might be bad but before we go to him we need to check everything is solid in the main board.If you are familiar with electronics you can remove the back cover and tap the chassis with a wooden or rubber handle to see if the set reacts,if it does you need to be atentive what area makes it react and flip the board to do some resoldering,If you are not too familiar with tv service you need the assistance from a servicer.Let Us know how it goes or if you need more information.

Oct 27, 2006 | Zenith H32G48S TV

Not finding what you are looking for?
Sanyo DS31590 31" TV Logo

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69955 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...