Question about Nintendo Wii Fit for Wii

1 Answer

Board won't turn on

I've had my Wii Fit for about 5 months now. I've already changed the batteries in the board. When I go to turn it on, the blue light won't even flash. It completely won't turn on. I checked the batteries and they are all facing the correct way, there is no battery leakage, and they are only a few weeks old (so it is not a battery problem). Please help me so I can use the game again!

Posted by on

  • 2 more comments 
  • Anonymous Feb 25, 2009

    I have the same problem

  • Anonymous Mar 02, 2009

    Same here.

  • Anonymous Apr 11, 2009

    exactly the same problem, no lights at all

  • Anonymous May 02, 2009

    Ugh, I have that probllem too. no lights, no response. :\



    Gak, it's annoying. Does the synch slution work for anyone? I personally haven't tried it yet.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 80 Answers

This seems to be something that I can't understand. My best suggestion is to ensure that your product is registered and contact Nintendo via their website's customer service link.

Posted on Feb 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The wii fit game is telling me to push the power button on the balance board with my foot. It blinks blue and that's it. The batteries are fine. So what do I do?


You need to sync the balance board with the Wii. It's easy to do and takes 10 seconds.

1) Start Wii Fit.
2) When it asks you to push the power button as you're describing, open the SD card slot on the front of the Wii and observe the red button.
tkahill.gif

3) Now, flip over the balance board. Remove the battery cover on the bottom of it, and press the red button beside the batteries, and the blue light should start to blink.
tkahill_0.gif

4) While the blue light on the balance board is still blinking, quickly press the red button on the Wii. If they are both blinking at the same time, they should be syncing to each other.

5) Your Wii Fit Balance Board should now be synced with your Wii! If it has been synced successfully, you will no longer need to sync it, and should now automatically connect when the button is pressed with your foot.

Apr 09, 2011 | Nintendo Wii Fit for Wii

1 Answer

I can't sync my board to my remote


You have to insert a wii fit game and bypass all the stuff until the game is ready to play.Open the battery compartment on the Wii board and open the large door on the front of the Wii console.Press the sync button on the board,then press the sync button at the top of the console compartment.The fit board light should stay steady blue.If it doesn't,try it again.When the fit board stays steady blue,it is synched.

Jul 13, 2010 | Nintendo Wii Fit for Wii

1 Answer

Blue light on, battery won't charge, unit new 12/14/09


rechargeable batteries are definitely a better bet. I have used many Wii battery packs and chargers, none seem to last very long.

Jun 05, 2010 | Nyko Wii Fit Battery Pak for Nintendo Wii

2 Answers

I have a wii fit board, when you power it up, it


Had the same problem. It's a sync problem.
First, best to double check you have fresh batteries.
Next, turn the board upside down and remove the cover from the battery compartment.
Open the small hatch cover on the front of your console unit.
Now start wii fit from the disk menu item.
Next, press the small red button inside the balance board battery compartment. The blue lights will blink for approx 3=5 sec.
While they are blinking, press the red button on the console (in the hatch compartment).
This should re-sync your board and the light stays lit.
Good luck.

Apr 07, 2010 | Nintendo CTA Digital WI-BBP Wii Fit...

1 Answer

Press the wii fit board on and just get a flashing blue light for about 5 secs


get the wii fit board backward and open the battery cover and open the cover at the left of were to put the wii disc then click them at the same time but dont let your finger there for more than 10 seconds

Feb 11, 2010 | Nintendo Wii Fit for Wii

3 Answers

Wii board


Make sure that you have synced the board to the wii (similar to a controller). You have to take the battery cover off the board and push the sync button. The blue light will start flashing. From there you need to open the front cover of your wii under the power button.

From there you start up wii fit and it will prompt you to turn on your board. You should get a solid blue light. If you don't, you may need to try syncing again.

Jan 04, 2010 | Nintendo Wii Fit for Wii

1 Answer

I cant synchronise my board with the wii box


Make sure you are trying to sync it when the Wii Fit game asks you to. It will say "place you wii fit board on the floor and turn it on" or something like that. and then when it asks you, turn it on, and it should sync.

otherwise, try it on another wii if you can... if it works on another wii then its your wii.. if it doesnt work on another wii then it is you Wii Fit Board.

Sep 15, 2009 | Nintendo CTA Digital WI-BBP Wii Fit...

1 Answer

My balance board won't turn on either


You have to sync it up to the Wii. Open the little compartment under the reset button. Press the little red button, and press the red sync button on the balance board. Which can be found were the batteries are placed.

Jul 13, 2009 | Nintendo Wii Fit for Wii

2 Answers

Wii Fit Balance Board Won't turn on


i fixed it by re-syncing it with the console. all good now, although it seems a little out of balance, but at least working....

Jan 04, 2009 | Nintendo CTA Digital WI-BBP Wii Fit...

3 Answers

Power


    Try these steps!

  1. Insert a Wii Balance Board compatible game disc in the Wii console.

  2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.

  3. Open the small SD Card slot cover on the front of the Wii console.
  4. Remove the Battery Cover on the bottom of the Wii Balance Board.
  5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.
  6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.
  7. The blue light will stop blinking and stay on steady once the syncronization is complete.

Sep 09, 2008 | Nintendo Wii Fit for Wii

Not finding what you are looking for?
Nintendo Wii Fit for Wii Logo

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Raj Patel

Level 3 Expert

851 Answers

Troy Gorman
Troy Gorman

Level 3 Expert

508 Answers

phil

Level 2 Expert

567 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...