Question about Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

Canon iP1800 will not connect to usb port

Loaded driver from cd. Loaded ok. When itwas checking the connection got message check connection. Went to hardware printer is there with a question mark. Clicked on printer message said re-install driver. Checked ports. None of the ports have printer beside them. I tried other ports that are listed, but when I try to use them I get a printer error message. All of my USB ports are working as I tried them all with my mouse which has a USB connection. I re-installed the driver after deleting the previous driver in-stall. Same problem,unable to connect to the USB port. I have a Averatec All-In-One with Windows XP Home Edition SP3. I installed this printer on my Compaq computer with no problems.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,692 Answers

Reinstall with upgrades. Five of the software packages were updated this month. Think they knew that their was a problem?
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=257&modelid=14991#DownloadDetailAct



Posted on Feb 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i install my Canon iP1800 printer to my computer. my computer is not reading my canon iP1800 printer


Sir. Win xp
Start>setting>Printersand Faxes>Add a printer(connect your printer)>Next>Next>fenish

OR
Connect your printer and insert your printer driver CD
ok thanks

Oct 03, 2011 | Canon PIXMA iP1800 Printer

1 Answer

ON CONNECTEING PRINTER CANON LBP 2900 MESSAGE USB DOES NOT RECOGNISE NEW HARDWARE IS DISPLAYED.PL ADVISE


HELLO,

do the following instructions,

Right click on Mycomputer and go to Manage and select Device Manager Their you check whether

usb ports drivers are installed or not if not please use the mother board cd's

after the usb driver installation now restart and plug in canon lbp2900b

May 27, 2011 | Canon LASER SHOT LBP-2900 Printer

1 Answer

Can u help me installing my printer canon pixma iP1980 inkjet


installation is easy. in xp, insert the cd and run the program. plug in the printer but do not turn it on until the driver installer says so. You might also wanna check out your country settings and language settings for the proper language of driver to be installed. vista and 7 just plug it in the usb port be sure that you have a net connection. the OS will download the driver automatically.

Jan 17, 2010 | Canon PIXMA iP1800 InkJet Photo Printer

4 Answers

LBP2900B DRIVER CD


CANON LBP2900B DriversHere is the driver for Windows 2000/XP/Server 2003/Vista/Server 2008/Windows 7
Installation Procedure when Connecting USB Cable
Do not connect the USB cable until after you have loaded the downloaded files.
After all files have been loaded connect the USB cable to the back of the printer.

DRIVERS
Thanks & Regards
M. Nanda Kishore

Dec 29, 2009 | Canon LASER SHOT LBP-2900 Printer

1 Answer

USB connection not being recognized on Imageclass MF4270 all of a


First make sure that the USB cable is OK and use another if you have one. Then make sure that the laptops have working USB ports from Device Manager. If they are OK then try powering up the Canon again without the USB cable connected to see if any errors are reported and then plug it in to your laptop to see if it is recognised. Check the status of the Canon Print Driver settings. If this all fails then you may have defective USB ports on the Canon and will need to get them repaired.

Oct 06, 2009 | Canon imageCLASS MF4270 All-In-One Laser...

1 Answer

Can't install printer


Hi there,
  • Unplug the printer cable from the computer.
  • Unistall the printer drivers from Device manager and also unistall the all the printer appications
  • restart the computer
  • try to download drivers from the below given link by selecting the printer model.
http://software.canon-europe.com/index.asp

  • after installing the cannon drivers and software it will ask you to connect the printer. 
  • then you can connect the printer and print a test page.
Hope this help. Please Rate My Response! Thanks!
Prem


Feb 19, 2009 | Canon Printers & Copiers

1 Answer

Error message displays there is no paper load paper but it is loaded properly but want print


Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Jan 22, 2009 | Canon PIXMA MP470 All-in-One Printer

1 Answer

Canon Pixma iP2000: yellow power light blinks-reset doesn't work


Normal 0 Normal 0 Driver could be corrupt.
Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

Jan 02, 2009 | Canon PIXMA iP2000 InkJet Printer

1 Answer

Laptop to printer


An installation CD should have came with the printer. A USB cable would probably be your best choice.

May 11, 2008 | Canon PIXMA iP1800 InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA  iP1800 InkJet Photo Printer Logo

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96576 Answers

old marine
old marine

Level 3 Expert

1472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...