Our GE 25GT240 TV sound is fuzzy. We removed the speaker and it appeared to be in fine condition.Is there any other component that would affect the TV sound. Do you know of any place we could purchase the part ourselves.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The epprom chip is most likely the problem, the tuner shield will need to be resolded to the main circuit board because over time it developes hairline cracks causing the epprom to fail in a variety of ways. The chip needs to be replaced and programed along with tuner shield repair, I don't think there is a board option replacement.
Is it like its vertical is folding over to the center of your screen? If this is it, vertical IC is loosing its connection to its board. Better to resolder it, or some component is going faulty within vertical circuit or the IC itself.
there seems to be interference via sound as the picture is fine. the interference is a crackling noise& tv is old
1 CHECK SPEAKER
2 so in that case tunning in sound section is disturb get it tnnned.
3 any components in sound section has done defective(SIF)SECTION.
1 CHECK SPEAKER not matching or paper torn or paper cone hard.
If a standard TV has color splotches in 1 or 2 corners of the screen, it is possible that a large magnet, such as a large speaker, is or was near the set and has magnetized the picture tube. The set has a built-in degaussing coil but it is small and will only demagnetize small magnetic fields. Make sure there are no magnets near the set and if the colors are still off, have the picture tube demagnetized with a strong portable demagnetizer. As for the audio, when there are audio output jacks on the back of the set then there is usually an option to turn the speakers off. Some sets have a switch somewhere and some sets have a setting in the audio page of the on-screen menu. Look for a switch or go into the menu, navigate to the audio page and look for a speaker setting (ON / OFF) and make sure the speakers are set to ON.
I think its the flyback and its starting to leak. this is a component responsible for the high voltage of your tv set. always observe safety in dealing with this. Have it check by a qualified technician. Good luck!