Question about Daewoo Microwave Ovens
SOURCE: Belling CJ ss 25 Microwave Combi
I would suspect a bad magnetron or a loose connection at the magnetron's terminals or possibly another high voltage part (such as a shorted diode or bad transformer).
If you or someone you know decide to look into it, we have critical safety information, info on door switch diagnosis and replacement, and disassembly information at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk
Otherwise, I would contact the manufacturer or your local microwave / appliance repair center for service.
Posted on May 30, 2008
SOURCE: I have a panasonic NNA883w
the digital programmer circuit / controller does not get a feedback
signal from the inverter for a period of 3 seconds, the controller will
stop the cook cycle.
Due to the lethal voltages used and produced, I do not recommend that an inexperienced person work on these inverter-based models.
You can find an authorized Panasonic servicer here.
We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.
Posted on Sep 25, 2008
There could be a main fuse inside the unit. Mine has one that is ceramic, sort of like the old glass car fuses but ceramic instead of glass. Digi-Key has all kinds of fuses, www.digikey.com.
Posted on Aug 04, 2009
Tips for a great answer:
May 11, 2015 | Microwave Ovens
Jun 19, 2011 | Daewoo Microwave Ovens
Dec 20, 2010 | Microwave Ovens
Here is a tip that will help you to figure out what is wrong with your Microwave Oven....
Microwave Oven Basic Troubleshooting Tips
Nov 08, 2010 | Daewoo KOG-867T Microwave Oven
Aug 20, 2010 | Daewoo KOG-867T Microwave Oven
Jun 28, 2009 | Daewoo Microwave Ovens
110 people viewed this question
Usually answered in minutes!