Question about KitchenAid KERA205P Electric Kitchen Range
We have a Kitchenaid convection oven (don't have model number on me) that has the push button controls on the front (hate those things!). Anyway whenever I select Bake (not convection) the symbol displayed shows both the top and bottom burners on - like roast mode. Thus I am having trouble baking cakes etc.
Any idea on what I can do besides unplugging the unit so it can reset?
It is going to be a part like this... (control panel)
but your MODEL NUMBER is going to need
Carnac the Magnificent
Posted on Jul 21, 2017
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if this cooker is fitted with a clock check that it is not set to delay start mode(auto) if it is reset clock and this will resolve problem
Posted on Jul 28, 2007
natural gas or propane? is this a brand new stove? or did this just start happening? is the gas shut off at the oven turned on? there are saftey features that shut off the gas so you dont get hurt. be carfull
Posted on Jan 01, 2008
SOURCE: The convection oven and broiler
Immediately you have a problem by the sounds of it that is related to the heating element that is inside the oven. This is evident from the fact that you say the convection van is rotating but there is no heat being produced. Now in the case of gas ovens, yo WILL CERTAINLY NEED AN APPROVED AND ACCREDITED GAS ENGINEER BY LAW. however, electric ovens are not necesessarily regulated. If the problem is in relation to a gas oven not heating, then either your gas supply or your element/ flame emitter may either be blocked or interrupted. IF THIS IS THE CASE, STOP USING THE DEVICE AND CALL OUT A GAS ENGINEER.
The other possible problem with this device could be to do with the electronic gas regulator (if your oven as one) and this is preventing gas from being recieved into the combustion nozzles within the oven. This regulator controls the amount of gas and the temperature to which the oven is to be heated to. Should this componen malfunction then it is defaulted to switch off, for obvious safety reasons.......These units are replaceable, but may cost a small fortune, and on top of this, it is advisable to call an engineer to fit this part.
You mention that you can notice the fan rotating on the digital display, but if the fan is not actually rotating, then your problem then poiints to an electrical fault which can happen if your appliance is powered on for excessive periods of time (thermal damage). Yet again, the electronics behind ovens are fairly straight forward, and usually its either the replacement of PCBs or elements that will recify many of these faults. But if you do decide to DIY jobby the repair, at least get your work checked out IT COULD SAV YOU ALOT OF MONEY AND EVEN YOUR LIFE!!!
I wish you all the best and I hope that this information was satisfactory, please do not hesitate to contact me here if you have further comments and questions, as im always on hand to answer your questions 24hrs a day 7/365 days a year. Once again good luck, and please let me know what happens
Posted on Apr 10, 2008
Tips for a great answer:
Apr 07, 2015 | Kenmore Kitchen Ranges
Feb 03, 2015 | KitchenAid KHMS155LSS 1000 Watts Microwave...
Apr 20, 2014 | KitchenAid KERA205PSS Electric Kitchen...
Jul 02, 2011 | KitchenAid Ovens
Nov 23, 2010 | KitchenAid KHMC107BT Convection/Microwave...
Oct 23, 2010 | KitchenAid KGRT607 Gas Kitchen Range
Apr 24, 2010 | GE Profile 30" Self-Cleaning Freestanding...
Apr 04, 2010 | KitchenAid KCO1005OB 1400 Watts Toaster...
Mar 03, 2010 | KitchenAid KEBC107 Electric Single Oven
888 people viewed this question
Usually answered in minutes!