I have old modle hawking 300 webcem &i dont have driver& softwere

First,make sure your batteries in the remote controller are good.Second,have the cable ready you got that came with the set(if you dont have one I strongly reccommend you dont use a different USB cable)Third,make sure the controller is off and the Hawk Eye is set to charge.(on the right side of the Hawk Eye you must pull it down)Fourth make sure your computer settings are set so that any program or other will be allowed to enter.The name of the Plug will be air hogs

You can download hytech ht620 webcem driwer from " http://www.free-4all-download.com/hytech/hytech+ht+620+web+cam+driver+download".
Hope this will help you.

1st You download Webcam Driver.
My moniteris not accept webcem instullusion
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

1st You download Webcam Driver.
Plz tell me how to install pk335 webcem plz tel me
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

visit www.driverguide.com , sing in , search, download and install all driver that you want or need , just put in searcher your model and search the driver

usb products dont need drivers....just connec tot eh USB port and connect the lan cable to that...it's auto detect...
Windows will auto detect it...if any other OS is run then i am not sure if the driver that you got will work...

there will be no win 7 driver as win 7 is no longer supported by Microsoft
to get a driver , you have to go to the manufacturers web site , find a down load for that model that is compatible for win 7 operating system
win xp is also not supported by Microsoft so there will be driver problems there as well

.i lost my cd and dont know z modle cam i got

http://www.camera-drivers.com/drivers/147/147834.htm

try here for the drivers and follow the instructions on the screen

hope it helps

go to http://www.hawkingtech.com/support/details.php?CatID=33&FamID=14&ProdID=252