Question about JVC Audio & Video Receivers

Open Question

I have an old jvc rx-r73tn....i know its old but it was operating very well until now...i can get no display or sound...it powers on but i cant get sound and dont know if source buttons are working...please help...love this stereo and cant afford a new one right now...thanks

Posted by on

5 Suggested Answers

  • 2 Answers

SOURCE: JVC RX-884VBK RECEIVER

The JVC RX-884VBK is a great machine, I had it for over 5 years and had no problem at all. I came across the (NO SOUND at all) and I believe it is an easy fix. Check the Front left, there are 2 keys marked 1 and 2 for SPEAKERS output, sometimes you don't notice that you connected the speakers to 1 and the 2 key is pressed. You could have both keys pressed and you will get the sound. I hope that helps.

Posted on Jan 14, 2008

SOURCE: jvc rx 318

did you find a manual? I have this stereo and the manual if you need some help.

Posted on May 06, 2008

SOURCE: jvc rx-5032v audio/vido control receiver

HI MATE YOU NEED THE REMOTE

Posted on Aug 19, 2008

lynchms
  • 93 Answers

SOURCE: JVC MANUAL

http://resources.jvc.com/Resources/00/00/96/LVT0018-001A.pdf

Posted on Mar 04, 2009

  • 1 Answer

SOURCE: JVC receiver Auto muting?

I had the same problem. I had bad antennae connection. I re-did the antennae conection and it fixed it. HOpe this will work for you...

Posted on Mar 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a JVC RX-9010V receiver and get no sound on FM , tv, etc.


no my antenna is a good one i tried with mp player too?? Is this a way to reset it to factory?

Nov 14, 2013 | JVC RX-9010V Receiver

1 Answer

I just bought a used jvc rx9010. it powers up but no sound from any speaker and shows headphone all the time what should a layperson check???


No speakers are selected if just headphone is displayed. Press the speaker button just under the power button. No station is tuned when auto muting is displayed. Hook up an antenna to the receiver or use a different source like a cd player.

Apr 07, 2013 | JVC RX-9010V Receiver

1 Answer

How do you balance sound between two speakers. Where is the balance control? JVC RX5000v


On the front panel ONLY:
1. Press ADJUST so that the MULTI
CURSOR up/down buttons work for
adjusting the sound.
2. Press MULTI CURSOR up/down
repeatedly until "BALANCE"
appears on the display.
3. Press MULTI CURSOR left/right to
adjust the balance.
• Pressing left decreases the right channel
output.
• Pressing right decreases the left channel
output.


please rate my solution.

Jul 04, 2011 | JVC RX-5000V 5.1 Channels Receiver

1 Answer

JVC RX-888V hook up to cable box - no video


There is some sort of setting you need to change on the JVC receiver. I had this same problem, and I read the manual and it solved it. You need to press and hold down a button to change the mode. Your unit probably says "TV Sound" right now. Once you press this button (not sure what button) like the manual says, the display should change to "DBS" and then it should work just fne.

Mar 20, 2009 | JVC RX-888V Receiver

1 Answer

JVC A/V Receiver RX 7042S - DSP NG


it seems the problem of your unit is in the power amplifier section,the IC chip there is defected that why only analog source .you better bring back to them the unit it is the only option, that is there back job...

Jul 03, 2008 | JVC RX-6042 Receiver

1 Answer

JVC RX 6042


just google jvc go to customer service at the bottom look up manuals and u can print it right off the internet no cost

Apr 02, 2008 | JVC RX-6042 Receiver

2 Answers

Jvc rx-5020v dolby digital problem


Also...If your BluRay player only has a optical output for audio you will need to swap the inputs on the JVC rx-5020v. Press the "settings" button repeatedly until "digital in" appears on the display. Now use the "adjust" up and down buttons until DVD is selected as option 2. It will look like something like: 1CD2DVD Note: this may bugger any other previous setup you have.

Feb 02, 2008 | JVC RX-5020VBK Receiver

1 Answer

JVC RX-6008v faceplate


have a jvc home theater with this next problem, when I turn the display lights up then see the name overload and shuts down the display, and it does not connect the speakers

Sep 27, 2006 | JVC RX-6008V Receiver

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio & Video Receivers Experts

 Elex
Elex

Level 2 Expert

49 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Rod
Rod

Level 2 Expert

224 Answers

Are you a JVC Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...