Question about Toys

1 Answer


Posted by on

  • jo_burrows55 Apr 24, 2009

    i wnat to know the same thing as i have tightened the nuts up the wheel wont turn is that normal??? please help very frustrated little boy wants to go out on it.


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You muppets! The nuts are nylocks, Simply slacken them 1/2 turn or so until the wheels spin freely. They will not come off and do not need to be tightened against the wheel, Make sure you have inserted a washer either side of the wheel. If you havn't and need to take the nylock nut off for any reason it should be replaced. B&Q will have them in an emergency othwise go to a proper hardware shop.

Posted on Jul 04, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need the 6bdc battery pack for tyco sea arrow

there should be a battery box that holds four AA batteries. The box fits in the boat.

May 11, 2012 | Tyco Radio Control Sea Arrow Boat 27mhz

1 Answer

I bought this product and it didn't come with all the parts. I'm very angry because this was a present for my son's 2nd Birthday. What do I do now?


Here is a link to the company's website with contact information.

There is a toll free number and email address. I am sure they will correct your problem.

Thanks for using Fixya.

Mar 30, 2011 | Tek Nek Toys Lucky Deluxe Spring Horse

1 Answer

Hello. I have bought a Hornby HM2000 controller and slave but it came with no instructions. Search the web to find a download with no success. Have you any ideas. Basic operation is straightforward but...

Hi Roger and welcome to FixYa, I am Kelly.

I went through the same searching drill you just did and came up with the same negative results.
The product code is R8012 and the model number is HM2000. (Forum searches also)

You are going to have to contact them here:

or here:

Make sure to include the model number and the product code on the form.
Thanks for choosing FixYa,

Mar 05, 2011 | Toys

2 Answers

We lost the creatology rock tumbler instruction manual and cant do anything with out it

Hi, We got the same tumbler this Christmas. You might be able to get an manual from
To get started though, Step 1 takes 2-4 days, step 2 4-7 days, step 3 2hrs, step 4 2 hrs.
To start day 1
1) rinse stones with water and fill barrel with no more than 8 oz of stones
2) Add step 1 course Grinding Powder
3) Add enough water to cover stones
4) tighten (snugly) cap on barrel to prevent leaking
5) Be sure barrel is clean & dry. Fit barrel into tumbler (fits correctly only in 1 direction). Cover barrel with safety dome.
6) Attach DC plug to tumbler and plug in.
7) Push on/off button
8) Push # of days button timer.

They suggest using a lubricant on the inside rim of lid to help removal.
Once you start the tumbling do not turn it off and leave it off - It will harden like cement inside the barrel.
It is loud so place it on a towel to help reduce noise and put it where it won't bother anyone.
Good Luck and Have Fun

Dec 26, 2010 | Toys

2 Answers

My son broke the key to his dexton ironhawk children's motorcycle. I need a replacement. Where do I go? I have going in circles on google.

You don't need a key to start the motorcycle. Our kids' company came over and lost our key and we too went in circles on Google. My husband finally decided to insert a kitchen knife in the ignition and to turn it and low and behold, it worked! Turn the ignition one small turn and you'll hear the engine start, and then twist the handle to make the bike go. BE CAREFUL NOT TO TURN THE IGNITION ALL THE WAY OR THE BIKE WILL TAKE OFF AUTOMATICALLY!! Just turn the ignition one small turn until you hear the engine rev. Of course, when your son is on it, you'll want to use something other than a kitchen knife, but as long as it's flat enough to fit into the slot and turn, it will work.

Aug 23, 2010 | Dexton Toys

1 Answer

I have found the plans for the Seattle Space needle woodcraft construction kit 3d puzzledo not give any detail as to what pieces fit to in relation to other pieces just what reference to the front picture...

I bought space needle model #814901 and was able to put most of it together using the pattern on the back and the pic on the front. I was able to match the numbers/letters for the most part. I have ended up with an extra circle, and some numbers that have no corresponding #s. Still, the end-product does look pretty much like the one on the front. I bought this model in the gift shop at the space needle. I saw a completed one downhill in an expresso shop on the waterfront across from the sculpture garden. I go to Seattle a couple of times a year and plan to check out the expresso shop again.

Aug 15, 2010 | Toys

1 Answer

Bought knex 11602 creatures set and there are no directions in it

If you go to the Knex site, you can type in the set number and download building instructions for all 10 creatures.

The Grand Toy Wizard

Jul 07, 2009 | Toys

1 Answer

My parents bought me a Graco Playtime swing second hand and it doesn't have a manual with it, any ideas where I can get one. Seems fairly straight forward but intregued about the Timer button...

Visit the Grayco site where you can get instructions for various products. Helps you find the model number and manufacture date for your product by giving the common locations on the swing.

You can even register your second hand product so you can learn if there is ever a recall for that item.

Jun 07, 2009 | Toys

Not finding what you are looking for?
Toys Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toys Experts


Level 3 Expert

100311 Answers


Level 3 Expert

66433 Answers

ray gallant

Level 3 Expert

39619 Answers

Are you a Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides