Question about Lands Phones

1 Answer

Keypad locked I woke up today and the phone has the locked icon on the display. I can go to the menu but i cannot dial any number .  I have no idea about the pin that it asks, and the default 1111 is not working.  Any help?

Posted by on

  • 2 more comments 
  • stilos Feb 20, 2009

    kx-tsc8grw
    :)

  • stilos Feb 20, 2009

    it is a panasonic kx-tsc8grw

  • stilos Feb 20, 2009

    :(


    i found the same ,,, 
    :(


    thanks anyway

  • Flapa May 11, 2010



    The model of yout phone device please?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Hello,

After consulting the manual i can tell you that if that password "1111" isn't working you have no way to make reset to that phone, i'll quote the users official manual

"Please write down your password. If you forget your password, consult your nearest Panasonic service center."


Sorry i couldn't be more helpfull. Wished i had an master password key for unblocking that model.


Posted on Feb 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't find sync on my lumina 520 phone?


First of all, turn your car on, and have it in park...
Push the Phone icon on the steering wheel. In a moment your center console (or display) will show Phone Menu, then Phone Redial... use the seek arrows on the steering wheel to move through the Phone Menu. When you find "Add a Phone" or "System Settings" then push OK on the steering wheel (or on the console). Scroll to Add Bluetooth Device, push OK. You will hear the Voice say "Push OK to begin pairing a device." Push OK, the console displays a 6-digit PIN.
Now go to your phone, to the settings, be sure Bluetooth is turned on, and then Search for Bluetooth Devices. In a moment the IP address may show but wait until it displays "Sync." Tap this tab and a second screen appears, and it prompts you to enter the 6-digit PIN form the dashboard, then push OK on the phone. In a moment the SYnc system will acknowledge the connection and ask additional questions. Push OK to conform and OK again to "Activate 911 Response," "Make Primary Phone" and "Download Phonebook." Watch you phone, it may have a screen (or two) pop up that what you to confirm to "Always Connect" to Sync (check the Yes) and then OK on the phone. When all is finished downloading (may take a couple of minutes), it will display Download Complete. Then push and hold the Phone icon on the steering wheel for a a few seconds and release. The Sync system should be up and active. Push the Voice button (the icon with the mouth & sound) and it will sound a tone and state "Sync, state your command." Then say "Phone" and the system will come back and say "Phone, state your command." Then either say "Call + (contact first and last name)," If it understands it will say "Calling (Contact Name) and begin dialing. Or say, "Dial," and the system will ask for you to say the phone number. It will repeat the number, if OK, then push the Voice button and say "Dial."
For more information, see this Ford Sync weblog: Ford Tech Lane Driving you on the fastlane of vehicle technology

Mar 05, 2014 | Cell Phones

1 Answer

Nokia new models secret codes


View the firmware version of the phone

Dial using the keypad: * # 0000 # - the version number displayed on the display.

V 5.16

22-06-99

NSM-1

V 5.16 - software version

22-06-99 - date

NSM-1 - The hardware (model)

View IMEI

Dial using the keypad: * # 06 # - IMEI number is displayed on the display.

SimClock

Allows you to check whether your SIM-card mode StopClock. When transferring the card to this mode significantly reduces power consumption and thus increases the work of the battery. Generally, all modern SIM-cards support this mode.

*#7780# reset to factory settings.
*#67705646# This will clear the LCD display (operator logo).
*#0000# To view software version.
*#2820# Blue tooth device address.
*#746025625# Sim clock allowed status.
*#62209526# - Display the MAC address of the WLAN adapter. This is available only in the newer devices that support WLAN
#pw+1234567890+1# Shows if sim have restrictions.
*#92702689# - takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)

*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
*#4720# - Half Rate Code activation.
*#4720* - Half Rate Code deactivation. The phone will automatically restart

If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345

Press *#3925538# to delete the contents and code of wallet.
Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin#

*#7328748263373738# resets security code.
Default security code is 12345

SIM Clock

Stop allowed

Warranty Codes

* # 92702689 # [* # war0anty #]

Enter the menu of warranty codes. In fact, you do not need, but you can find them using the arrows scroll menu.

Menu:

1. Shows the serial number of the device.
2. Date and year of manufacture (eg 0299).
3. Shows month and year of sale (if installed). Here you can set the date, but be careful - it can be done only once in their life phone
4. Date of last repair (if any)
5. Sends all the phone numbers, pictures, and calls from one phone to another (possibly in order to restore). In models with an infrared eye, this procedure works, and through him

EFR CODEC (Enhanced Full Rate)

This function with its inclusion on the idea, should significantly improve the quality of speech, but unfortunately, it must be supported by your connection. When the work is slightly increased power in the phone call (about 5%). How do I know, none of the Russian cellular operators do not support this feature. Principle is based on a different compression algorithm for speech recognition (ACELP) and has a wider bandwidth.

Feb 28, 2011 | Nokia E71 Smartphone

1 Answer

All code sent my email


View the firmware version of the phone
Dial using the keypad: * # 0000 # - the version number displayed on the display.
V 5.16
22-06-99
NSM-1
V 5.16 - software version
22-06-99 - date
NSM-1 - The hardware (model)
View IMEI
Dial using the keypad: * # 06 # - IMEI number is displayed on the display.
SimClock
Allows you to check whether your SIM-card mode StopClock. When transferring the card to this mode significantly reduces power consumption and thus increases the work of the battery. Generally, all modern SIM-cards support this mode.
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display (operator logo).
*#0000# To view software version.
*#2820# Blue tooth device address.
*#746025625# Sim clock allowed status.
*#62209526# - Display the MAC address of the WLAN adapter. This is available only in the newer devices that support WLAN
#pw+1234567890+1# Shows if sim have restrictions.
*#92702689# - takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)
*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
*#4720# - Half Rate Code activation.
*#4720* - Half Rate Code deactivation. The phone will automatically restart
If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345
Press *#3925538# to delete the contents and code of wallet.
Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin#

SIM Clock
Stop allowed
Warranty Codes
* # 92702689 # [* # war0anty #]
Enter the menu of warranty codes. In fact, you do not need, but you can find them using the arrows scroll menu.
Menu:
1.Shows the serial number of the device.
2.Date and year of manufacture (eg 0299).
3.Shows month and year of sale (if installed). Here you can set the date, but be careful - it can be done only once in their life phone
4.Date of last repair (if any)
5.Sends all the phone numbers, pictures, and calls from one phone to another (possibly in order to restore). In models with an infrared eye, this procedure works, and through him
Dial * 3370 # to activate (the phone should reboot) or # 3370 # to deactivate this function.
HR CODEC (Half Rate)
Substantially impairs the quality of speech, but saves battery somewhere at 30%. Again, must be supported by a mobile operator. American networks that support this feature, I do not know.
Dial * 4720 # to activate (the phone should reboot)
or # 4720 # to deactivate this function.


i hope this helpful
thank you for using fixya

Feb 09, 2011 | Nokia 5230 Cell Phone

1 Answer

Please help.,.,i need my license key.,., imie 35227201819836.,., thanks


insert code :
*#92702689# - takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)

and

View the firmware version of the phone
Dial using the keypad: * # 0000 # - the version number displayed on the display.
like this example :

V 5.16
22-06-99
NSM-1
V 5.16 - software version
22-06-99 - date
NSM-1 - The hardware (model)

View IMEI
Dial using the keypad: * # 06 # - IMEI number is displayed on the display.

i hope this helpful
thank you for using fixya

Feb 07, 2011 | Nokia 6600

1 Answer

How do you change language from Spanish to English on this phone? I put it on spanish somehow and i cant get it back to english.


Hello
Using Settings
Settings contains many submenus that let you customize your phone.
Display/Info Features The Display/Info menu controls how the keypad and display appear: - changes the wallpaper that • Wallpaper appears on the idle screen. - sets the size of text on the display. • Text Size - changes the look of the display. • Theme - controls whether main menu • Home Icons icons appear on the idle screen. - controls backlight illumination. • Backlight133 Customizing Your Phone - controls whether the time and date • Clock appear on the idle screen; sets time and date format; sets year. - controls whether the items on • Menu View your main menu and Java applications menu appear as large icons or a list. - sets large digits to appear on • Large Dialing the idle screen when you enter a number. - sets the language that your phone • Language displays.
for more information Get the manual from here http://www.motorola.com/staticfiles/Support/US-EN/Mobile%20Phones/i850/US-EN/_Documents/Static%20File/i850_UG.pdf
Hope this helps if so do rate the solution

Jan 05, 2011 | Motorola Mobility i850 Cellular Phone

3 Answers

Panasonic cordless phone model KX TG 5771 dial got locked. Password in not known. we can receive calls and we can talk also. we can not dial the numbers.


My cord less Panasonic phone dial locked not able to dial please give solution how to normalise the dial lock.

Dec 08, 2010 | Panasonic Lands Phones

1 Answer

I have a binatone idect x5i twin phone. i cant dial any numbers with a '0' in it, it says number not recognised, thought problem with handset so exchanged phone but new one doing the same. local numbers...


You can check a couple of things: press MENU/OK, down to ADVANCED SET, press MENU/OK, down to RESET, press MENU/OK, enter PIN 0000, press MENU/OK, the display will show 'CONFIM?' so press MENU/OK again. This will ensure the Dial Mode is correct, if it persists you will need to contact your line provider.

Aug 24, 2010 | Uniden Cordless Phone

1 Answer

My phone dect 6.0 uniden rings when someone calls but will not dial out


Hello :

Maybe you need to program the phone .
Here I'll tell you how :

  1. Press the Down main navigation button and press Menu/OK. The main navigation button is in the center of the keypad and is cylindrical in shape.
  2. Press either the Up or Down main navigation button until "New Entry" appears on the display.
  3. Press the Menu/OK button and "Enter Name" will appear on the display.
  4. Enter the name using the keypad. Enter the names the same way you would enter text in a text message on a mobile phone. For example, to enter the character "H," press the 4 digit twice. Use the labeling on the buttons to guide you.
  5. Press the Menu/OK button after entering the name and "Enter Number" will appear on the display. Enter the phone number using the keypad.
  6. Press the Up or Down navigation button to select "Save" or "Go Back" and then press Menu/OK. The entry is now programmed. Press the goodbye button; it's the button with the phone icon on a cradle.
  7. Press the Down navigation button and the first alphabetical number is displayed. If you keep holding the button, the phone will scroll through your phone book alphabetically.
  8. Press the button with the phone icon on it (not the goodbye button) to dial the number associated with the phone book entry.
I hope that will help .

rate if useful please !

Feb 22, 2010 | Uniden DECT 6.0 Cordless Telephone...

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

4948 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...