How i can remove the passward which i forgetted on bios secreen?
I use vista windows on my labtop acer 5620 and i entered a passward i has related to lap protiction put when i restart my computer a black screen appear to me and ask me to enter a passward but i can't remember the it so what the solution please?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When you boot up to the log in screen type in administrator as user to log in if you cant log in
during the boot up process you will see on the screen for a short amount of time press a certain keyto enter set up press and hold that key during the boot up process to enter BIOS scroll down to set user password or supervisor password you can change or remove your password from there also
The most common way that most of us know on how to reset or clear the BIOS password is to physically remove the power from the computer by disconnecting the power plug and then removing a battery for 30 minutes from the motherboard. Another way is to reset the clear CMOS jumper on the motherboard itself. Both of the 2 methods mentioned works because most motherboards use a battery to sustain the BIOS/CMOS settings for the motherboards PROM chip. So by cutting off cmos the battery power, the BIOS/CMOS settings will be erased.Hope this helps
I think you need Windows Password Key. It has solved 100000 users of that problem in one year.Hope it can help you. Related Tutorial about how to reset windows password by using windows password key http://www.lostwindowspassword.com
remove the cover which has your power button and covers the LCD cables. Remove the keyboard and flip it over, being careful to not pull too hard on the cable. There's 2 small triangular silver connection pads beside the keyboard connector on the main board - connect them together and power on your computer (flat screwdriver works fine). Press the f2 key - you'll find it doesn't prompt you for a password. You can lift off the connections now. Go to exit and save changes, and you're password free.
If you get a post screen that means the board is most likely fine, if its a desktop motherboard all you have to do to wipe the password is clear the cmos, like this >>>> if you don't have a jumper (the green plastic cap) then remove the battery for 10 mins, make sure there is no mains power connected, this should wipe the password and all you have to do is set the time and date and your ready to format and install an OS
As another option you could try resetting the jumper. Some boards save the password regardless unless the reset the BIOS by using the resetting jumper. Refer to the motherboard's manual for further information on how to do this.