Question about Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Kenmore elite oasistop loader f 50 code - Kenmore Oasis HE 27082 Top Load Washer

Posted by on

  • 1 more comment 
  • Anonymous Feb 22, 2009

    The code appears about 24 minutes before the wash is complete. I turn the washer off than on to complete the cycle. This has happened three times in the last several weeks. I have owned the washer for about two years and this problem has just started recently.

  • prado911 May 16, 2009

    We had Sears come out and told us we had a bad RPS unit, so I ordered it online and my husband changed out the old one. Started up just fine, then the same F50 codes reappeared. Now what?

  • Anonymous May 18, 2009

    We have the same problem with the f 50 code

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 126 Answers

F50 code equates to the motor rotor position sensor (RPS) senses no rotation. if the basket turns freely, then its electrical in nature.

Posted on Feb 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset my kenmore elite HE5t front loader washer


getting F35 error code on my kenmore elite he5t steam ...

www.shopyourway.com > Manage My Life > Questions
getting F35 error code on my kenmore elite he5t steam washer. can the ... plug out and in the power and restart steamwashing the washer or do the rinse/spin. .... What does the error F35 on my Kenmore HE5t Steam front load washer mean?

Kenmore HE5t Washer Repair for Error Code F21 & Sud ...

? 5:02
https://www.youtube.com/watch?v=vAg6vqidW3E
Nov 9, 2014 - Uploaded by DDIY Guy Danny Jose
Kenmore HE5t Washer Repair for Error Code F21 & Sud ... The only other suggestion is to turn the breakers ...

My Kenmore Elite HE5t front-loading washing machine will not

www.justanswer.com > Appliance

Dec 26, 2015 | Kenmore Washing Machines

Tip

F21 Error Code on Whirlpool Duet & Kenmore Elite Front Loader Washers


This advice is for Kenmore Elite and Whirlpool Duet model FRONT LOADERS displaying the “F21” error code.

“F21” is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a “SUDS” error may also be displayed. This may be an indication of a drain pump problem and/or clog in the drain line. You will need to check the following:

  1. First, attempt to unplug the washer for at LEAST 30 minutes to reset the Central Control Unit (CCU). Sometimes this is all that is required to correct momentary glitches with the unit. If the error code returns, proceed to step 2.
  2. Check the drain hose to make sure it is not kinked or clogged.
  3. Check the electrical connections to the pump and ensure the pump is running.
  4. Remove the drain pump filter and check for foreign objects and/or debris.
To check the drain pump, click on the following link for step-by-step instructions.


http://www.fixya.com/support/r385844-checking_drain_pump_kenmore_elite_front

If the above procedures do not correct the problem, it is recommended by the manufacturer to replace the drain pump.

on Jan 04, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

My Kenmore Elite front loader keeps on showing the same problems


Cut down on your soap i only use very little soap and it works great.No more SUD code

Jul 02, 2014 | Kenmore Elite 45986 Front Load Washer

1 Answer

I have a kenmore elite he3 front loader; it gives me the "sud" code during a wash cycle. What could be the potential problem?


either way too much soap or the wrong type,run a couple of washes,without clothes to purge excess soap and see if this clears up the sud code

Jul 07, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

Why is my kenmore elite (top loader) oasis washer HE is displaying a code of HC


The water inlet hoses are probably removed and reconnected in reverse, and then trigger the HC error code to flash indicating the hot and cold water inlet hoses are reversed. Reconnect the water inlet hoses properly and start a cycle then let us know what happens next.

Apr 18, 2010 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Bellow for Kenmore Elite front-loader washer


The Bellow should be available at a appliance part store. be sure to call with the model number and serial number, that way if they don't have it they will have time to order it.

Apr 12, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore Elite front load washer stops and blinks F35 and locks up


f35 code indicates a pressure switch problem. Try unplugging unit for 2 minutes.Plug back in and test.If F35 reappears,check hose from tub to pressure switch

Nov 04, 2009 | Kenmore Elite 45986 Front Load Washer

2 Answers

I have a Kenmore Elite Washer model 48051. I am


i think the dl code is clogged water pump,tip it back and you can remove the water pump cover and check it-mike

Jul 17, 2009 | Kenmore Washing Machines

1 Answer

Check Pump on front loader kenmore HE3 elite


Remove the lower front panel 3 screws across the bottom. Pump will be behind this panel.

May 26, 2009 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Kenmore Oasis HE 27082 Top Load Washer Logo

Related Topics:

237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...