Question about Linksys Wireless-G Broadband Router

1 Answer

I have just lost my connection with my wireless. Tells me it has been disconnected however I am able to pick it up with my other laptop?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 121 Answers

Delete the wireless profile out of your computer. Click on the wireless icon in the lower right hand corner of the screen. Right click and choose View Available wireless networks. Click change the order of preferred networks. In the preferred networks area click on the wireless network and click remove. Now reboot the computer or disable wireless and enable wireless. Once that is complete try and connect to your network. If this doesnt work try moving closer to the wireless router to see if that solves the issues. If you are using a third party software to connect to the wireless AP. Make sure you have the Use Windows to configure my wireless network settings unchecked in the Wireless network connection Properties window I had you open earlier to delete the profile in. If you are using a third party software like cisco, I would suggest using Windows to manage your connects.

Thanks,
ArmyMason

Posted on Feb 24, 2009

  • Garrett Murray
    Garrett Murray Feb 24, 2009

    Hello again,

    I also wanted to comment on your choice of wireless AP. If you have a Linksys AP, I would consider buying a different brand. I have seen too many die in my career. Ever sense Cisco bought out Linksys, the quality has been poor. I Find D-Link is a good brand and their are a few others that arent bad either. Also if you are using a PCMCIA Wireless card, those could also be an issue.


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unable to access router wirelessly


try to reset it (there's a small button on the back you have to push with a pin)

then connect to the router (the ip is the same as the gateway when typing ipconfig in the command prompt of your computer, as soon as you have connected to it) to change ssid's, weps and other important stuff

Dec 13, 2007 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

Client Manager will not pick up my buffalo wireless card.


You can find the driver in the Buffalo download archive for older products:

http://site2.buffalotech.com/support/downloads2.php

Choose from the menu.
You also find manuals and set-up guides there.

If you have any more questions, just come back here and leave a comment - I'm happy to help.

Good luck!

Jul 31, 2009 | Buffalo Technology Buffalo AirStation...

1 Answer

Can't connect to netwoork


Just configure the wireless settings your laptop. Go to Network Connections > Right-click on Wireless Network > Properties. Go to Wireless Network tab and look for Preferred Networks. Just remove all of them and click OK.

Now, On the Network Connections, right-click on Wireless Network Connection > View Available Wireless Networks. Connect to your own wireless network and enter your wireless network key if it tells you to type it. That should fix your wireless connection. Now if your wireless network is not showing, you need to change the wireless channel of your router by accessing the router's setup page using your wired computer.

Apr 18, 2009 | NetGear WGR614 Wireless Router

1 Answer

No wireless connectivity with Westell 327w


on the back of the modem is a reset button. try resetting and bridging the modem again.

Apr 09, 2009 | Westell Wirespeed VersaLink...

1 Answer

I can not connect my laptop to my linksys wireless-b router......


hi! Welcome to fixya!
You need to turn off first or disconnect LAN connection which is the cable connection before you can use the wireless connection. After that go control panel you need to setup internet connection and be sure to configure the IP address to automatic which the DHCP mode configuration then restart. That's it. Have nice day!

Mar 07, 2009 | Linksys Wireless-G WRT54G Router

2 Answers

Cannot aquire IP address through my Desktop using Lynksis Wireless Router


sounds like you need to reenter the password/key
go to network connections and disconnect from it. then try to reconnect after the refreshes.
is it asking for a password/key?

Dec 26, 2008 | Belkin Wireless G Plus MIMO (F5D9230-4)...

1 Answer

P660HW-D1 Router not working wireless


Problem with the Zyxel P-660?   I experienced:
1. laptop would see the wireless 660HW briefly and then it would disappear.   2. laptop would not see wireless at all. 3.  same issue with desktop when using USB wireless 11g dongle 4. no problem on wired connection (ethernet)
EASY solution!   if Zyxel is set to scan for a channel it will want to work on channel 13 nearly every time in a busy environment.
HP laptops and many receivers cannot recieve on 13 -  highest channel is 12.   
Pick on setting for the Zyxel which matches an available channel on your receiver.  Problem solved.

Nov 20, 2008 | Zyxel P660HW-D1 Router

2 Answers

No connection to internet


What version of windows are you running? 98, 2000, XP, Vista?

Nov 15, 2007 | Belkin Wireless G Plus MIMO (F5D9230-4)...

Not finding what you are looking for?
Linksys Wireless-G Broadband Router Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Linksys Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...