Question about Hoover Breathe Easy U5250-930 Bagged Upright Vacuum

1 Answer

No suction with my Hoover Breathe Easy Upright

The roller works and the baf fills up with ait, but I can't get any suction. I can't figure out how to take it apart to check inside if something is blocked either.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 328 Answers

If the bag fills up with air it should be sucking since the air that fills the bag is blowing air into the bag thus the dust gets carried along with it. However it should be easy to inspect the hose by taking it off by either removing screws *dont lose them, by the way! And looking at the dust channel after the beater bar. Either way something is clogged if the dust bag is filling up with air. Also check that the filter underneath the bag or beside the motor is completely clean.

Posted on Mar 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The suction stopped working after emptying dirty water and filling up with new water and cleaner


I have an older Hoover SteamVac Supreme #F5815 and I'm having trouble figuring out how to clean the part in the front that the dirty water goes thru before it gets to the tank. How do I clean it?

Mar 06, 2011 | Hoover SteamVac F5914-900 SpinScrub...

1 Answer

My Hoover Bagless Windtunnel vacuum has no suction on the bottom, although the hose works. Everything else seems to be working properly.


Check the belt, look like we have the same problem, I just unscrew the bottom part where he brush roller is located and found a broken belt
Easy to replace just follow this instrctions
">

Jan 31, 2011 | Hoover U5753-900 WindTunnel Bagless...

1 Answer

After using my attachments I have a hard time getting suction when using upright again - how do I get the suction on my upright? It's a Hoover blue widepath Tempo~ thank you


It may be clogged underneath the vacuum where the roller is. Take the bottom plate off and look into the intake port. There may be some blocking the port.

Nov 09, 2009 | Hoover Tempo Widepath Upright Vacuum -...

2 Answers

Hoover makes terrible screaching sound when using upright.


It's most likely the bushings/bearings in the beater bar (roller). The beater bar cover is fairly easy to remove -- take it off and investigate. Could be that the roller only needs lubricating on the ends. Also, check the belt to see if it's intact or damaged.

Clean area thoroughly.

If this is not the problem, please, let me know.

Charlie

Aug 26, 2009 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

No suction on my vacuum. Hoover Tempo


try to clean between the roller and the tube to the hose

May 05, 2009 | Vacuums

1 Answer

Can't adjust floor height on my Hoover Breathe Easy vac


on the bottom there is a smaller set of wheels in the middle check to make sure the spring is still in place

Apr 14, 2009 | Hoover Breathe Easy U5250-930 Bagged...

1 Answer

Hoover savvy no suction on carpet setting


Check to make sure you hear the vac. motor is running when in that position. The switch in the handle could be bad if it is not.

Apr 29, 2008 | Hoover U8145-900 Savvy Bagless Upright...

1 Answer

Hoover Breathe Easy


Check that the bag has actually been installed properly.  If the plastic door lock has been broken off you may need to order a new door / bin cover from Hoover themselves. The only other way that the bag is popping off is because something may be clogged in the main dirt channel feeder leading to the bag.

Apr 24, 2008 | Hoover U5106-900 Breathe Easy Bagged...

2 Answers

Replace the belt


on the bottom there is a few screws remove cover and there is a roller brush there and the rest should be self explanitory

Oct 16, 2007 | Hoover U5227-930 Elite Upright Vacuum

1 Answer

Problem with vacuum suction in upright position


Move the lever on the front of the machine to "carpet". It won't agitate on floor

Apr 11, 2007 | Hoover Company Wind Tunnel U53019 Upright...

Not finding what you are looking for?
Hoover Breathe Easy U5250-930 Bagged Upright Vacuum Logo

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Roger Potts

Level 3 Expert

694 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...