Question about RCA P52937 52" Rear Projection Television

1 Answer

Screen looks like its in 3d

I have a rca p52937. the screen looks like its in 3d and the screen looks like its bowing in from the top and bottom

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 927 Answers

LOOK FOR OPEN FUSE (CTM) BY IHVT, THE MIDDLE ONE.

Posted on Feb 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 52" RCA P52937SG screen bows on the top and on


What you are describing can be due to a number of different settings.

Focus on the red and green guns
Sharpness on the red and green guns
Horizontal position and size
Vertical position and size.

Please consult a professional for adjustment on these items as they are all near or connect to parts that have Hazardous Voltage.

Mar 22, 2011 | RCA P52937 52" Rear Projection Television

1 Answer

My 52 inch rca hdtv comes on but it looks like the screen is bowed and the colour is off.do you know of any solutions to this problem.


My rca 52 inch hdtv picture looks bowed on the top and bottom of screen. And everything looks like it has a red shadow behind it.

May 12, 2010 | Televison & Video

1 Answer

Hi RCA 52 inch part numbers P52937SG


Tries this website for convergence ICS.Must know how to solder?Tv Repair World.com,Ebay.com.

Oct 15, 2009 | RCA P52937 52" Rear Projection Television

1 Answer

Hi i have a RCA P52937SG with the bowing of the screen


The problem may still be on the power supply board (one of the supplies may be missing and) when you unplug the supply both supplies go missing check the supply voltages and repost

Oct 14, 2009 | RCA P52937 52" Rear Projection Television

2 Answers

My RCA big screen TV picture now looks like 3D without the glasses. The picture also bows in at the top and bottom in the middle of the screen. What would cause this?


Go to menu then setup if you donot see convergence on menu then you have a blowed Fuse FL231 it will be on Bottom board to left side onthe righht side of FBT flyback transfomer there is 3 of them in a roll small brwn rectangler looking caps But are fuses the one in the middle is it. Call Mats for fuse 1-800-628-1118

Sep 26, 2009 | RCA Televison & Video

1 Answer

Tv picture has a top and bottem bow to it and picture seems to be too large as some stuff on the outside of the picture just gets cut off.


Replace your Regulator IC mounted on Board above bottom Bottom boards STK730-010 Call Mats for Part 1-800-628-1118

Sep 26, 2009 | RCA P52937 52" Rear Projection Television

1 Answer

I have rca 56wh78 56" with a bowed screen


You need to replace the FL231, DL231 and CP230 You can get the parts and instructions at the following link cost about 12.00 total. The parts are listed under the RCA parts category.
http://servicemanuals.vstore.ca/

May 30, 2009 | RCA P52937 52" Rear Projection Television

2 Answers

Rca 52'' projection tv model p52937


Go to menu ,now to setup when in set up do you see convergence? If convergence is missing in menu it is a open fuse,only it does not look like fuse ,They look more like small square capaitors brown, they will be right next to flyback transfomer FL231 (3) of them in a roll it will be the middle one,you can take needle nose plyers and pull top up on fuses.

Dec 17, 2008 | RCA D52W19 52" Rear Projection Television

1 Answer

Big screen tv


Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

This is a very common failure on these projection sets and a fairly simple DIY fix. All projeciton sets including Samsung, RCA, Sony, Philip Magnavox, Panasonic, Pioneer, Akai, GE, JVC, Toshiba, and others at some point will have the same problem.

Common Symptoms include....
  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
  • TV shuts off after powering on. Power light will blink. TV may also make a chirping noise.
Here are some photos of convergence problems.

42d3683.jpg

7859b01.jpg

e87380c.jpg
Here is a quick test....

Using your original remote go-to the settings menu then goto the convergence section.

Try to adjust the red and then the blue convergence.

You should be able to move RED and BLUE in all directions - up, down, left, and right. And you should be able to get the grid straight.

If you can't move them in all directions or cant move them far enough your convergence chips are bad and should be replaced. This is a common problem.

Note: If you TV has as flash focus or magic focus button only try pressing the button. If it fails to fix the convergence your need to fix it. See below for a fix

69189a5.pngCONVERGENCE SOLUTION

You will need to replace the convergence chips and possibly some convergence resistors and pico fuses.
This is a a fairly easy DIY job if you are handy and can follow directions. You can get complete repair kits from TvRepairKits.com or click here. They have put together DIY repair kits that include the OEM parts and step by step photo instructions for each repair. If you are not handy or can't follow directions we would suggest calling a shop.

Jul 05, 2008 | RCA P52937 52" Rear Projection Television

Not finding what you are looking for?
RCA P52937 52" Rear Projection Television Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69708 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...