Question about Sony KV-36FS100 36" TV

1 Answer

Does not have any picture or sound

It blinks red twice then pauses then repeats

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

The 2 blinks usually means an over current problem. This can be anything from a shorted horizontal output transistor to a shorted regulator. If you have no experience with TV repair, I would suggest you get a detailed estimate from a local servicer. If you have some experience, look for a shorted HOT or regulator and let me know what you find.

Dan

Posted on Feb 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn on tv no picture no sound standby light starts green changes to flashing red


the number of red light flashes indicate where the fault lies...sony error codes are easy enough to find if you google the model with the number of flashes.hope this helps somewhat as you dont say how many blinks!!
regards,steve.
ps.line output transformer failure rates are quite high on these sets,usually resulting in two red blinks-pause-two red blinks-pause etc...

Sep 28, 2010 | Sony FD Trinitron WEGA KV-28CS70 28" TV

1 Answer

My sony wega blinks the standby light red 6 times, pauses and repeats. Cant get a picture on it at all. Any ideas?


  • Six blinks - No Horizontal (H STOP), no raster, goes to the blinking self-diagnosis function immediately. Check C515 & 516 and the jungle IC, IC206.
  • Sep 13, 2010 | Sony FD Trinitron WEGA KV-32FS120 32" TV

    1 Answer

    I got a problem in TV. TV starts and shutdown immediately, while from sound its looks like that raster is going up but no picture, no sound. Red light is blinking. This happens only when i power off the tv...


    Hi Sikandar,
    Let me know how many times red led blinks as there would be an interval of 3 seconds so count blinks from pause to pause.
    Is it Sony AR25M61 model or any other?
    Above info will help to diagnose problem.
    Thanks.

    Nov 13, 2009 | Sony KV-AR25M61 TV

    3 Answers

    The red standby light is flashing twice with a pause, then twice and a pause etc. There's no picture or sound and the light flashed whether we have the tv on or off. Any suggestions?


    This blinking is a diagnostic code. Please update this with the model number. These sets contain circuitry that will shut the set down and display a code like this when a problem is detected. With the model number, I can look up the problem and provide potential repair suggestions.

    Thanks,
    Dan

    Aug 20, 2009 | Standard (CRT) Televisions

    2 Answers

    Mitsubishi ws 65819


    Ur power board ic converter it dead.
    Ur Convergence board is bad going to die to.
    Both must change.

    Aug 15, 2009 | Mitsubishi WS-65819 TV

    1 Answer

    Have a sony kd32fs130 and after limited viewing the picture goes out. I still continue to have sound but no picture and the red light blinks. Which part I need to change?


    How many times red light blinks when TV lost picture? There would be interval of 3 seconds in red light blinks so count pause to pause and let me know.

    Jun 11, 2009 | Sony FD Trinitron WEGA KD-32FS130 32" TV

    1 Answer

    Sony trinitron


    Need a little information here...

    1. The TV remains on, yet there is no picture and no sound? Or does the TV turn off altogether?
    2. Are the blinks constant and continuous? Meaning, does it blink two times, pause, blink two times and go on and on like that?
    3. Can you turn the TV on? Or can you not get it to turn on?

    Answer those questions and I can give you some more information or send you to the place where you can get it.

    Nov 14, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

    4 Answers

    SONY WEGA TRINTRON MODEL KV36FV15 RED LITE FLASHING


    The model number is KV-36FV15 and blinking is constant no pause

    Aug 01, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

    1 Answer

    SONY KV-27FS20 TV does not start


    Only 3 things bad Flyback transfomer,bad picture tube ,shorted hori output transistor. more then likely you have a bad picture tube,ive already throwed over 20 sets out due to bad tubes.

    May 04, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

    1 Answer

    NOTHING HAPPENS!!!!!


    power supply probel, need to take to service

    May 02, 2008 | Sony FD Trinitron WEGA KV-27FS100 27" TV

    Not finding what you are looking for?
    Sony KV-36FS100 36" TV Logo

    Related Topics:

    65 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Sony Standard (CRT) Televisions Experts

    The Knight
    The Knight

    Level 3 Expert

    68172 Answers

    Jaime Hernandez

    Level 3 Expert

    2267 Answers

    matt martin
    matt martin

    Level 3 Expert

    1191 Answers

    Are you a Sony Standard (CRT) Television Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...