Question about Brother MFC-8660DN 5-in-1 Laser Multifunctional Printer

Open Question

How to reset page counter for brother mfs 8660dn?

How to reset pager counter?

Posted by on

4 Suggested Answers

POCBM
  • 121 Answers

SOURCE: Brother HL 1250 Laser. Drum & page counter

Reset the drum counter as follows:

  1. Open the front cover.

  2. Locate the control panel button under the LED lights on the left side.

  3. Press the control panel button until all lights are lit, then release it.
    The Drum counter is now reset.
  4. close front cover

Posted on Mar 23, 2009

  • 1 Answer

SOURCE: OCR problems for Brother MFC-8660DN with Vista 64bit

You are correct in that paperport 9 will not work on Vista and paperport 11 is the alternative. I called about a similar model and the guy at Brother told me that paperport 11 is included on an updated cd from brothermall.com for some models. It was only about $3 so you might want to check for your model. Hope this helps.

Posted on Jul 08, 2009

  • 17 Answers

SOURCE: How to change the fuser gear in Brother MFC 8660DN Printer

I recently changed the fuser gear on my MFC-8840DN (a similar machine) and type up detailed information. The pdf file of the instructions has been posted at:

http://www.sharperminds.net/downloads/instructions_for_changing_a_fuser_gear_on_a_brother_printer.pdf

Hope you find this helpful.

Ed

Posted on Feb 25, 2010

Jimsta01
  • 405 Answers

SOURCE: how do I reset the drum counter on the a Brother

open the front cover of machine ( where the cartridge is installed), then press the clear button, and then press 1 for yes for change drum question.

Posted on May 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Copy


I suggest You Go to Official Brother Printer Page For You Brother Printer Problem On Below Brother forum URL Link: The faxes send and copies make are completely blank Brother In Case You Still face Problem and Need Online Assistance Then Please Follow Us For On : Brother Printer Support

Feb 26, 2014 | Brother MFC-8660DN 5-in-1 Laser...

2 Answers

Reset fuser life counter MFC 8660DN


Thank you for the inquiry.
This is a common occurrence after fuser replacement and no information is in the manual.
1) Press the 3 and 9 buttons at the same time in the ready status.
2) "Reset Menu" will appear on the LCD. Scroll to Fuser by pressing up arrow or down arrow button then press the OK button.
3) "1. Reset 2. Exit" appears on the LCD. Press the 1 button to reset the fuser counter. The display briefly shows "Accepted".

The machine returns to the ready status after a few seconds.

I hope We've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response.
I hope I've earned a good rating from you today.
Please post a comment if you need additional assistance so that I can help you further.
Best regards,
TF

Jun 03, 2011 | Brother MFC-8660DN All-In-One Laser...

1 Answer

Drum replaced unit still says drum near end. How do we reset? We are not given an reset option


Try this:
If printer displays "Toner Life End" after installing new cartridge, open front cover, press 'Option' button, then key *00 on the keypad. This resets the device so it knows it has had a new cartridge.

this will reset toner counter on a lot of brother printers good luck.

or:

Open door
press Clear/Back key
press *00
press OK

Do not choose anything for drum replacement. when drum replacement menu comes up, just press the * and then 00, then just press OK.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

May 26, 2011 | Brother MFC-8660DN Network Mono Laser AIO...

1 Answer

I have a Brother MFC-8660DN. When I receive a fax


That type of problem comes from either the drum or the fuser, the best way to check is to unplug the machine while it's printing and see of the shadow is on the paper before the fuser, if it is then you need a new drum, if not the fuser is the culprit.

Oct 28, 2009 | Brother MFC-8660DN 5-in-1 Laser...

1 Answer

OCR problems for Brother MFC-8660DN with Vista 64bit


You are correct in that paperport 9 will not work on Vista and paperport 11 is the alternative. I called about a similar model and the guy at Brother told me that paperport 11 is included on an updated cd from brothermall.com for some models. It was only about $3 so you might want to check for your model. Hope this helps.

Apr 11, 2009 | Brother MFC-8660DN Network Mono Laser AIO...

2 Answers

Brother HL 1250 Laser. Drum & page counter


Reset the drum counter as follows:

  1. Open the front cover.

  2. Locate the control panel button under the LED lights on the left side.

  3. Press the control panel button until all lights are lit, then release it.
    The Drum counter is now reset.
  4. close front cover

Mar 23, 2009 | Brother HL 1250 Laser Printer

Not finding what you are looking for?
Brother MFC-8660DN 5-in-1 Laser Multifunctional Printer Logo

Related Topics:

443 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...