Question about Epson Stylus CX4600 All-In-One InkJet Printer

1 Answer

What is wrong with my Epson CXC 4600 printer ALL lights are flashing and E is where the number of prints should be. Will not print

Posted by on

  • Anonymous Mar 09, 2009

    Code error e

  • anoswiladit Mar 16, 2009

    i have the same problem, i just took out the empty ink cartridge, and how don't know how, all light tart blinking and the message E appeared. I can't scan, i can't copy neither print. Don't know what going on. Help Please.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Epson Master
  • 4,338 Answers

Did you have a paper Jam? Make sure that all the paper residue is removed from inside the unit.

Did you recently change cartridges? Make sure that the packaging is completely off the cartridges.

Download this SSC Utility Service and run it to clear the error.

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Posted on Feb 19, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Paper light and ink light keep flashing even after ink refilled can't print epson L110

could you make shore the printed circuit on the cartridge/s is not obstructed and clean and shiney copper colour and check the part it connect to the printer any obstructions will stop the printer from reading the cartridge.

Aug 09, 2017 | Epson Office Equipment & Supplies

1 Answer

Printing only symbols and numbers

The two most typical causes for this type of behaviour are:

1. wrong print driver being used. Ensure that you are either using the proper HP print driver for the 4600 or the HP Universal Print driver.

2. Bad communication cable, loose connectors or dirty connectors.

Try printing the configuration page from the control panel. If that prints ok then it is more likely the two above causes. If the configuration page prints wrong then you probalby have a formatter issue or memory issue.

To print the configuration page, press the down arrow until it reads information, press the check mark, then use the down arrow until configuration page shows then press the check mark again.

Jul 01, 2011 | HP LaserJet 4600 Printer

1 Answer

Printer won't print self test page and all lights flashing. Beeps 5 times when starting. Print head moves freely. What could be wrong?

tried making a copy from the pritner itself also pull theprinter upside down and see if anything comes out from the printer and then turn it on andthen try printing a test page

Jan 08, 2010 | Epson Aculaser C1100 Printer

1 Answer

Printer wont do anything


Does it only show "E" or is there a number as well such as E-90? chances are there is something wrong with the printer. try to unplug and replug it and check if cartridges has inks. if all fails call epson for a replacement printer.

Hope this help

Jan 11, 2009 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

Epson stylus 600 non stop flashing light nonstop printing

Flashing light may indicate that it's receiving data to print.

What is it printing?

Cancel all print jobs.

Nov 19, 2008 | Epson Stylus Color 600 InkJet Printer

1 Answer

Epson won't print and all lights flash

"Turn the printer on while holding down both the ink and paper buttons. When the paper light flashes release both buttons", then hold down the ink button for approx. half a minute until the printer lights flash again then release it. That resets the printer.”

Mar 15, 2008 | Epson Stylus 880 InkJet Color Printer

1 Answer

Nothing comes out when I print

Epson 777 will not print. No paper jam. Power light flashing; red error light on steady. Paper does not feed; if paper supply is placed deeper in feed, entire paper supply (about 12 sheets) feeds thru as one sheet normally would , without printing.

Feb 27, 2008 | Epson Stylus Color 777i InkJet Printer

Not finding what you are looking for?
Epson Stylus CX4600 All-In-One InkJet Printer Logo

420 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Alun Cox

Level 3 Expert

2678 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18413 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides