Question about VeriFone OMNI 3200 (P092-101-10) Printer

1 Answer

Replaced paper in Omni 3750, now it feeds but doesn't print

I just replaced the paper roll in our Omni 3750. When you run a transaction it feeds the paper but it doesn't print anything.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 18 Answers

Make sure you are using thermal paper and it is feeding from the bottom of the roll. If not press down on the lid when the paper is printing sometmes the tension springs were defective.

Posted on Mar 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi my omni 3200 printer is not printing. The page


You either have the wrong paper in the machine or it is in backwards. It takes thermal paper. Run your fingernail across the paper and if it makes a mark, that is the side which must be facing up when it goes trough the printer.

Jun 19, 2010 | VeriFone OMNI 3200 (P092-101-10) Printer

4 Answers

OMNI 3200 OUT OF INK


a lot of times there are issues with the paper cup lid not closing all the way. Try to apply preasure to the lid of paper cup and re-print a receipt and/or report. If still not printing.. Check the paper... make sure its thermal. To test you paper if it thermal... use your thumb nail and run it across the backside of the paper. If it thermal it will leave a faint gray mark the "shinny" side of the paper.

Jul 23, 2009 | VeriFone OMNI 3200 (P092-101-10) Printer

1 Answer

Change paper


Paper roll installation is deceptively simple.  No need to feed paper through any slots inside the machine as you might expect.  Just put shiny side of paper down, feed edge of roll out of machine and under the roller that is attached to lid, and that is all there is to it!

Oct 28, 2008 | VeriFone OMNI 3200 (P092-101-10) Printer

4 Answers

Will not print


The thermal print head probably needs to be replaced on the unit. You will have to contact Verifone to find out how to get it fixed.


Here

Sep 23, 2008 | VeriFone OMNI 3200 (P092-101-10) Printer

1 Answer

Hp LaserJet 1100: Runs louder than normal and continuously, BUT will not grab paper and print


Fred shine a flashlight down the paper feed throat and see if the feer roller is rotating when the printer tries to print.
I have had to replace many of the feed rolls and separation pads in this series of printer.
the tires get dirty or worn and feed multiple sheets or none at all. check for obstructions as well-sometimes the black mylar sheet which sits in front of the feed roll gets in the way of the paper path and has to be pushed in place. I have also seen paper pieces stuck next to the paper path switch which is visible after removing the toner cartridge. hope this helps.

Mar 28, 2008 | HP LaserJet 1100 Printer

1 Answer

Printer


If it is not pushing the paper out of the tray, you should first try taking a soapy cleaner like fantastic or formula 109 and clean the feed rollers and see if that helps.
The paper tray also lifts up and down to feed the paper so the gear that drives the tray up and down may be broken.
Slen the rolls first. If that doesn;t last long. Say in a day or two it starts misfeeding again, the rollers will need to be replaced.

Mar 23, 2008 | Printers & Copiers

1 Answer

Xerox phaser 6120 colur laser printer


Not sure how long you have had that machine. But remove the paper and the tray. Dampen a slft cloth with some soapy cleaner, such as fantastic or Formula 409. Look into the paper feed area for the rollers and clean them well. Maybe 2 or 3 times. Then if you have some handy wipe them again with some alcohol.
Your feed rolls, depending on how many pages you have run, may be worn out and need replaced. But that should not occur with less then 40-50 thousand prints on it.
I suspect just some contaminant on the feed rolls.
Let me know please.

Mar 20, 2008 | Xerox Phaser 6120/YN Laser Printer

1 Answer

Paper will not feed


What you need to do is remove the tray, and look for the feed rollers and clean them with either alcohol or a soapy cleaner like Fantastic.
Clean them a few times, make sure they are dry then try again.
That may solve it completely, or your rollers may be slick and need replaced.
When those rolls get dirty, it's like trying to drive on ice. You just slip. Also, if those rolls are needing replaced, I wouldn't be upset with the refurb work. Sometimes those rolls fake you out. They appear and to touch feel perfectly fine, but try and feed a piece of paper, and it just won't.
If you can, look into the paper tray with a flash light, and see if they are turning. If they are, then dirt or slick rolls is the only problem you have.

Mar 01, 2008 | Samsung CLX 3160fn All-In-One Printer

Not finding what you are looking for?
VeriFone OMNI 3200 (P092-101-10) Printer Logo

Related Topics:

1,021 people viewed this question

Ask a Question

Usually answered in minutes!

Top VeriFone Printers & Copiers Experts

kakima

Level 3 Expert

96730 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a VeriFone Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...