Question about Audio & Video Receivers

Open Question

My Pure Sonus 1Xt will not work

DAB Pure Sonus 1XT,will not work the back lite comes on but thats it,

Posted by on

  • jrnaylor Apr 15, 2009

    Infact I can work the radio however if it is in stand-by mode for anything longer than 1-hour the radio wants to reboot and so I have to re program the settings including the alarms which renders the radio useless for my purposes!

×

1 Suggested Answer

  • 1 Answer

SOURCE: Switch on Pure Sonus 1xt and display lights up but that is all

Did you find a solution for this as I have the same issue?

Assume not power supply as powers up fine just doesn't become responsive or tune or anything... glowing, blank screen.

Can't do a firmware upgrade either as that needs to be triggered from the radio menu and the menu cannot be accessed!

Chris

Posted on May 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fm radio works fine but the dab will not find any stations, I have tried different aerials and still no good


What's the make & model of the radio?
Most DAB/FM radios work from the same antenna, so if you receive FM stations, you should receive DAB stations in your area.
It should be noted that DAB transmitters work on lower power than conventional FM transmitters, and so you may be in a weak reception area (for DAB). It should also be noted that DAB uses different frequencies than regular FM stations and household appliances such as laptops,WiFi, microwave ovens, etc can affect DAb reception.

Nov 18, 2013 | Audio & Video Receivers

1 Answer

Overnight, our PURE CHRONOS II dab clock radio/alarm failed completely........no screen, no radio, morning alarm(radio) did not come on. Disconnected from mains, replugged in, failed to initialize (no...


I had the same problem but saw that someone had solved the problem by buying a new power adaptor so I tried the same.
Success!
There are some people selling new power adaptors on eBay with good return policies so I'd recommend trying this before giving up hope.

Apr 27, 2011 | Audio & Video Receivers

1 Answer

MY PURE 3 dab RADIO stopped working overnight - it was working perfectly saturday night but was completly dead sunday morning. It has a battery pack attached and i have also tried using another PURE mains...


I have purchased 2 Pure Radios (Mio &Evoke Flow) and have had the eact same problem you mention. It is definately a bug with the radio.

I have had the Mio replaced twice and the Evoke Flow once. 6 months later I had the same problem and took it back and got a credit. I would not trust this brand any longer...

Nov 03, 2010 | Audio & Video Receivers

1 Answer

Pure Evoke 3 circuit


yep, just download a manual (free) from Pure.com.

Feb 18, 2010 | Audio & Video Receivers

1 Answer

Switch on Pure Sonus 1xt and display lights up but that is all


Did you find a solution for this as I have the same issue?

Assume not power supply as powers up fine just doesn't become responsive or tune or anything... glowing, blank screen.

Can't do a firmware upgrade either as that needs to be triggered from the radio menu and the menu cannot be accessed!

Chris

Sep 20, 2009 | Audio & Video Receivers

1 Answer

Yamaha stereo only works on Pure Direct


It sounds to me like an audio enhancement filter is malfunctioning. The pure direct on / off is a sound filter to alter the sound performance of the receiver. There is a rare possibility that there is something wrong with one of your speakers- causing certain circuits in the receiver to malfunction. A way to check for this is to connect only one speaker and an audio source. test each channel first(without pure direct) by connecting the speaker to a channel and then disconnecting it, and connecting it to a different channel repetedly, until you have gone through all of the channels. If you really wanted to pinpoint such an anomaly, then you would need to do it with every speaker through all of the channels to make cetain that this is not the case. But then again this is not very likely. I would personally just use the mode that seems to work, because something is obviously malfunctioning, or possibly burned out. And repairing it is most likely costly! I hope that you can get something out of my answer! sorry! Good Luck!

Jun 11, 2009 | Audio & Video Receivers

1 Answer

SONY XDR-S55DAB Stack at display : DAB WAIT


Solution seems to be do not buy small Sony DABs, or any small ones. I have the XDR-S56DBP and have same problem. Was also cursed with 'no ensemble' error. Even worse than the Pure one I had before which lost all of the DAB facility and now only functions as an FM radio. I had a good medium sized Roberts one, but power cable split and I can't find a suitable replacement.

Apr 28, 2009 | Sony Audio & Video Receivers

1 Answer

The buttons to turn the volume up and change the channels on my dab pure elan rv40 do not work. i can however turn the volume down and change channels down


make system microprossesor reset according to your model.
---try to make system reset by disconnection and connection.
if all above failed bring a spray lubricant contact cleaner from radio shack and apply spray in volume and channel buttons,

Aug 18, 2008 | Audio & Video Receivers

1 Answer

DAB radio model Sharp FV-DB1E


This is SwannerX and I have solved the problem by locating the DAB radio receiver to a higher position ( some 6ins. higher only ) and orienteering the aerial in an opposite direction.
All 25 stations now tune O.K. and signal quality still reads in the high 90's and signal strength shows 9-10 bars. This is not substantially any more , but it has done the trick!!!
I am still very puzzled why it would not work again in the original position where it has worked well for many years.
Obviously DAB requires a good strong signal as I am living very close to the transmitter at Mounteagle in the Black Isle and the set is upstairs in the house to achieve the highest signal into the set's whip aerial.
Another annoying query I can give you is this :- Every time I do a full AutoTune operation on the DAB receiver , it ALWAYS comes ON tuning BBC Asian 1st. so that station comes up as a 'Favorite' on the Radio's screen. No matter how many other stations I select and listen to for at least 20secs. say, the BBC Asian one STILL is listed as a FAV.
Is this a peculiarity of the Sharp design or a function of the transmission system?
Maybe this BBC Asian is on the first freq. the DAB Radio scans, but I would have thought it would come ON every time with the last station which was selected before it was switched OFF.
What do you think ???

Feb 22, 2008 | Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

812 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68229 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...