Question about Graco Cherished - Connor 8690CNN

Open Question

Installing graco car seat "cargo" 8690

I need instructions for this car seat because I don't know how the harness system attaches the name of the car seat is "cargo" and the model # is 8690cnn, if you could e-mail me instructions it would be very helpful jeannielou2006@yahoo.com thanks.

Posted by on

5 Suggested Answers

  • 3 Answers

SOURCE: Graco metrolite travel system

If a babies R us is near by, ask them to help with the installation or ask a fire department to help with the installation

Posted on Jul 28, 2007

Vish2
  • 74 Answers

SOURCE: lost piece of Harness

You can get replacement buckles at Babies R Us. They are also known as harness ties. They may be available at other stores like Target etc. You can also order one from Graco, but it will be a bit pricey with shipping costs etc. -Vish

Posted on Oct 04, 2007

SOURCE: how to install graco seat in 99 jimmy

i think the snug rides are rear facing only. if it pulls out of a base and has a carrying handle. its rear facing only.

Posted on Mar 02, 2008

my3angels
  • 125 Answers

SOURCE: Graco Snugride Infant Car Seat

HI! I've had 3 babies and alwyas use the Sungride! My presonal trick......First, be sure to roll up a towel (try different sizes for the perfect fit) and push it under by the seat crease (where the back cushion and seat cushion meet). Then, when you are pulling the belt to make it tighter, put your knee in it to add some weight and really get it tightened! I'm sure you'll notice a world of difference! :)

Posted on Aug 19, 2008

  • 1 Answer

SOURCE: Graco nautilus 3 in 1 car seat need help with strap installation

Yeah its a bit tricky. ON the fron of the car seat there is a strap that goes intot he seat and has a button to lossen it. Press it down to lossen that strap then flip seat over and on the bottom you will find other end of the same strap and it has a brass t-fitting. Take it and pull it up the back side of seat and the shoulder straps fit into the brass fitting then tighten by pulling strap in front of chair.

HAve fun ;)

Posted on Jun 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you adjust straps on a baby car seat?


Graco SnugRide 35 : Adjusting Harness Straps - YouTube

? 6:41
https://www.youtube.com/watch?v=vl_JSaEuu0U
Jun 23, 2012 - Uploaded by Baby Car Seat Installers
This video shows how to adjust harness straps for the Graco ...Graco SnugRide 35 : Adjusting Harness Straps. Baby Car SeatInstallers.

Britax B-Safe: Adjust Car Seat Harness Straps - YouTube

? 3:12
https://www.youtube.com/watch?v=XGHnSLXRqq8
Mar 2, 2014 - Uploaded by Baby Car Seat Installers
We teach you step by step on how to move the harness strapshigher as your child grows. This video is for ...

Nov 17, 2015 | Cosco Baby Gear

1 Answer

Crouch strap


Hi

Please contact Graco for assistance with correct use of the harness

Get news from Graco delivered right to you inbox

May 10, 2014 | Graco Nautilus 3-in 1 Car Seat

1 Answer

Rethreading 5-point harness


Hi Tamara,
We'd have to advise you to contact Dorel USA for further assistance. You can e-mail direct to crelations@djgusa.com

On the back of the carseat shell you will find an orange and white sticker. Take a photo of this sticker and attach it to the e-mail as it will help the customer care advisors to determine which carseat model you have.

Jun 23, 2013 | Dorel Juvenile Group 22741 ATI Convertible...

1 Answer

What do you attach the harness buckle ****** to? Otherwise the strap will fall out


You can check out Graco's user manual:

http://babycare.manualsonline.com/manuals/mfg/graco/3in_1_car.html?idRes=12934527
or their instructional videos on how to install a Nautilus 3-in-1 car seat here. Just make sure you are watching the right video for
http://www.youtube.com/watch?v=-cQtaOPj_IY&list=PL9EAB6BF70A88A694&index=7

http://www.youtube.com/watch?v=WMKDDQ9fs64&list=PL9EAB6BF70A88A694&index=8

http://www.youtube.com/watch?v=hpPIqYgan7E&list=PL9EAB6BF70A88A694&index=15

Jan 20, 2013 | Graco Nautilus 3-in 1 Car Seat

1 Answer

Need harness instructions for graco car seat


You can find instructions for a variety of Graco car seats here: http://babycare.manualsonline.com/manuals/mfg/graco/graco_car_seat_product_list.html
Or here at Gracobaby.com:http://www.gracobaby.com/CustomerService/ProductInstructions/Pages/default1.aspx?page=ProdInst

Aug 27, 2012 | Baby Gear

1 Answer

Washed the cover of maxi cosi tobi.... there are 2 springy things sticking up and don t know where they should be in the cover or on the seat.


Hi,

If the springs are near where the childs shoulders would be, then these are supposed to attach inside the shoulder harness pads, you will notice that these make the harness spring open when you undo it.

Hope this helps.

Sep 02, 2011 | Maxi-Cosi 22371HFL Infant Car Seat

1 Answer

I washed my daughters graco car seat and now i havent a clue of how to put it back together and i need re assemble it fast please help


Proper installation of a car seat is imperative to protectan infant. Accidents do happen and assuring that the instructions forinstallation of the Graco Infant Restraint/Carrier are followed will increasethe chances of preventing injury or death as a result of an accident. Graco carseats are a popular choice among parents due the availability of products atcommon retail stores, affordability and user-friendly baby gear.Graco Car SeatInstallation
Step 1
Plan to secure the infant seat facing the rear inthe middle of the back seat. If a center position is not available, positionthe seat directly behind the driver's side seat. For safety reasons, therestraint should not be placed in a position where there is an air bag. Ensurethat the proper vehicle lap belt system is in place; manually adjusted lapbelts, automatic locking retractor lap belts and lap/shoulder belts withlocking latch plates are all considered safe for use with the Graco InfantCarrier/Restraint.Step 2
Remove the carrier from the Graco car seat baseby squeezing the lever at the rear of the restraint and lifting the seat up.Place the base in the vehicle facing the rear. Thread the vehicle shoulder andlap belts through openings at the end of the base without twisting the belts.Secure the belts by placing plastic tongue over the belts. Tighten the vehiclebelts by pushing down on the base and pulling out any slack.Step 3Install locking clip to secure shoulder and lapbelt together just above the seat belt buckle. Connect the two belts with thelocking clip. Buckle the lap belt system and tighten by pulling out any slack.Ensure that car seat base is secure by pulling and pushing on it; the baseshould not move sideways, forward or backward.Step 4
Place the Graco carrier in the base. Push down onthe restraint until it clicks and locks into the base. Set the infant in therestraint for travel and place harness straps over the baby's shoulders. Clickthe chest place together over the sternum and lock the buckles into placebetween the legs.Tipsand Warnings
  • Contact local police departments, hospitals and fire departments to inquire about child car seat safety checks
  • Graco Infant Restraint/Carrier will not protect against serious injury or death if not installed properly. Always read the Graco owner's manual that comes with product prior to attempting installation and travel with an infant.

Jul 19, 2011 | Home

1 Answer

I need the user manual, we washed the cover and straps and are having a hard time re-harnessing the straps. Can we download the harnessing instructions for the century 1000 model 5 point harness model


This car seat is long expired and should be discarded. Century was bought out by Graco a number of years ago. There is no support available by Century/Graco for these products anymore.

Mar 06, 2011 | Century 1000 STE 4161

1 Answer

Hello, Have used Nania Newfix Solo child seat very satisfacorily for 3 years with harness. Now time to remove harness (leaving back of Childseat in place). Have removed harness as per instructions -...


Right,
After several months of struggle to find written instructions how to attach the central harness adjustment strap (The one with metal anchor at the end) to the red clip (buckle) strap as seems to be shown in instructions. budyn71.jpg
I have found number to temtex uk company that supplies nania products to argos on 01162844910, while emailing them on sales@teamtexuk.com had no result. There's no need to attach the two. Central harness adjuster strap has to be detached and pulled by it's front end as far as it goes. budyn71_0.jpg
While red clip strap threads through the gap between backrest and the base. budyn71_1.jpg
And red clip strap threads through hole (bracket) at the back of the base. budyn71_2.jpg

Sep 26, 2010 | Nania Solo Combination

1 Answer

No problem with harness but what about the extras?


I had the same problem. The elastic loops loop forward, under the car seat handle, and attach to the plastic clips. You can get an idea of how it should go from page 13 of Graco's instruction manual (http://www.gracobaby.com/Instruction%20Manuals/ISPC090BB.pdf).

This may not be the instruction manual for your exact model--you can find your model number on a sticker under the base. However, the instruction manual for my model didn't include information about putting the seat cover back on after removing it to wash--the instruction manual I linked to above does.

Sep 30, 2009 | Graco SnugRide - Giselle Infant Car Seat

Not finding what you are looking for?
Graco Cherished - Connor 8690CNN Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Graco Baby Gear Experts

Iron
Iron

Level 3 Expert

3018 Answers

kenneth njonjo

Level 3 Expert

1575 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Graco Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...