Question about Lexmark X642e All-In-One Laser Printer

1 Answer

Lexmark 640 I need to know how to reset the maintance on the lexmark 640 without installing a kit

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

This one is easy...

Turn printer off
Before powering on, hold down the button with a check mark on it and the directional button to the right of it..
Power printer on, still holding down said buttons...
wait 15-20 seconds and release... when the printer finishes booting up it will be in config mode
(if you get the error 80 scheduled maintenance, hit the go button)
hit the down button once... you will see then reset maint counter. Hit the menu button ... you will see something to the effectof reset with a check mark next to it..

Hit the menu button again and you will see it say reset. Then hit the back button till you get back to the main menu and use your up/down arrows until you find exit config menu. Hit menu and it will reboot itself right back to the regular screen.

Hope this helps,

Posted on Mar 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can t find dissc for the lexmark z 640 and i can t instal it


Please visit the Lexmark website to download and install the Lexmark Z640 Printer Driver on your computer. Select your operating system > click on "FILTER" > click on the driver under Recommended Downloads > download and execute the file. Simply follow the instructions on your computer screen to complete the installation.

Jan 28, 2012 | Lexmark Printers & Copiers

1 Answer

Error 80 on a lexmark t642


Hello. Welcome to Fixya
Actually Error 80 is "Scheduled Maintenance Message"
You can reset the maintenance count by going to the Configuration Menu
Follow the given steps to solve it:

  • First of all Turn off your printer
  • Hold the 2 and 6 buttons while the printer is off
  • Turn on the printer but don't release the buttons yet. Keep holding those buttons for about 10 seconds
  • On your Operator Panel, you should see "Configuration Menu"
  • Scroll down and look for "Reset Main Count" and select it.
  • Exit Configuration Menu and turn the printer off then back on

I hope it will be solved, If it doesn't work then
You are required to purchase the maintenance kit and have it replaced even if the printer is still under warranty. Some maintenance kits can be installed without the assistance of a technician. However, some warranties cover on-site installation of the maintenance kit by a technician after you have purchased the kit.
In this case you must be contact to LEXMARK service provider, To get support by LEXMARK on phone, then call at 1-800-539-6275

I hope this solution will surely helpful for u
If its is helpful then please don't forget to click on Four thumbs which are given below this solution
THANKS & Keep Using Fixya

Feb 28, 2011 | Lexmark T642 Laser Printer

1 Answer

My lexmark 640 series printer could not install or it falied to install


Try to use the Lexmark Z640 driver from the Lexmark website. You can download the driver by clicking on this link: Lexmark Z640 Drivers. Select your operating system to start the download. Follow the instructions on your computer screen. Thanks.

Feb 18, 2011 | Lexmark Z640 InkJet Printer

1 Answer

There no lexmark productivity studio icon to open all i get when i open is customer experience,maintance,tools release notes what do i do to get the icon back


Download and install the Lexmark X2600 software from the Lexmark website. The driver includes the Lexmark Productivity Studio software. Click on this link Lexmark X2600 Drivers. Select your operating system by clicking on change OS. Then click on FILTER. Click on the Complete Driver under Recommended Downloads. Download and install the software. Hope this helps. Thanks.

Jan 21, 2011 | Lexmark X2600 InkJet Printer

1 Answer

Clear photoconductor counter Printer Lexmark e342n


Here's an article on How to Reset the Photoconductor Page Count on a Lexmark E340 or E342. Click on this link http://bit.ly/b1Qil7. Thank you for choosing Lexmark.
NOTE: Resetting photoconductor page count should be done only when a brand new photoconductor kit is installed. Doing so without replacing pc kit could cause print quality issues.

Sep 15, 2010 | Lexmark E342n Laser Printer

1 Answer

Printer lexmark z640 isn't working on widows vista


THe z650 model does not have a VISTA driver to be able to download to make it work from the Lexmark website. SO this means that you model will not work with VISTA, Sorry.
Link proof below: http://search.lexmark.com/searchresults.shtml?force_natural=true&query=Z640&isoctry=US&isolang=en

Mar 28, 2009 | Lexmark Z640 InkJet Printer

2 Answers

Broken Lexmark 640 installation disc


Lexmark does not distribute replacement install disk for all models, but many models are available.

Contact Lexmark here, to see if the disk for your printer is available.

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if you get in troubles, follow the instructions below to reset and reinstall drivers:

  • Unplug printer USB.
  • Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
  • Download driver from website, or use the disk and run the install file.
  • Follow driver installation wizard.
  • Plug back printer when prompted from installation wizard.
Note:some printerdoes not work on Vista, if you do not find any driver download for Vista on your model page, that means your model is not Vista compatible.

Feb 23, 2009 | Lexmark Z640 InkJet Printer

2 Answers

Lexmark x642e MPF Reset maintenance counter


Hi~
You can reset the maintenance count by going to the Configuration Menu.

Step 1: Turn off your X64x printer
Step 2: Hold the 2 and 6 buttons while the printer is off
Step 3: Turn on the printer but don't release the buttons yet. Keep holding those buttons for about 10 secs
Step 4: On your Operator Panel, you should see "Configuration Menu"
Step 5: Scroll down and look for "Reset Maint Count" and select it.
Step 6: Exit Config Menu and powercycle your printer (turn it off then back on)

Hope this is helpful... =)

<<ichtuscheeky>>

Jan 30, 2009 | Lexmark X642e All-In-One Laser Printer

2 Answers

Lexmark 640 series color jetprinter, will not print?


my lexmark 640 printer won't communicate with my laptop

Sep 09, 2008 | Printers & Copiers

1 Answer

Driver 640 lexmark ink jet printer


The driver can be downloaded here, directly from Lexmark:

http://downloads.lexmark.com/cgi-perl/downloads.cgi?lxkprod=Lexmark+Z640

Choose your operating system from the list, and download.

Be sure to UNPLUG the printer from the PC before installing the software, and ONLY plug it in once the on-screen instructions tell you to do so.

Apr 16, 2008 | Lexmark Z640 InkJet Printer

Not finding what you are looking for?
Lexmark X642e All-In-One Laser Printer Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...