Question about All-Pro Kerosene Garage Shop Heaters - All Pro PK115T Forced Air Kerosene Space Heater

1 Answer

Where can I purchase parts for my All-Pro

Please Help!

Where can I purchase parts for my All-Pro Multifuel Heater?
I have experienced several of the problems that have been posted, including the heater not wanting to stay on once it starts up. I checked with a salesman at Home Depot and he suggested that I clean the filters. This worked for a while then it refused to start at all. Ther is a part that I think is some kind of klutch - it makes the air blow, I believe it is broken.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 181 Answers

There is no clutch on this unit.it is an air pump that has rotor and vains.All pro heater parts are getting few and far between. try this place they have some of the parts but not all.if your ignitor ever goes out there are non to be found.they are no longer avalible.......www.portableparts.com

Posted on Feb 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is a multifuel stove?


Multifuel stoves can accommodate various fuels including white gas, unleaded auto gasoline, kerosene, jet fuel and diesel. They tend to cost more than any other camping stove.

Sep 10, 2012 | Coleman Camping, Backpacking & Hiking

1 Answer

I have a All-PRO 30,000 BTU/HR propane heater Model Universal 30-fas All Pro SPC-30 that needs a thermocouple. The part number on the burnt thermocouple is H08F, 315, e2 W-R 0020 made in Mexico. I need a...


Master Parts Distributor carries all the parts for the now defunct DESA International, who manufactured your All Pro heater.

The following link will take you to them http://www.allproheaterparts.com/

Hope this helped you.

May 01, 2011 | Heating & Cooling

1 Answer

How do i put the belt back on the washer?


If this is a Whirlpool manufactured TOP LOADER WASHER (such as the one pictured), it does not have a drive belt. These model washers use a motor coupling in place of a drive belt and are known as direct-drive systems. If the washer does not agitate or spin, it could have several causes. Most commonly, this is caused by either a lid switch malfunction or a broken motor coupling. The following link explains how you can diagnose the problem yourself and repair:

http://www.fixya.com/support/r3965207-whirlpool_top_loader_no_spin_problem


If the washer IS running, but the agitator is slipping, then you may have worn agitator dogs, or a loose agitator bolt. The following link explains what the dogs are, and how to access to acces the bolt and replace them:



http://www.fixya.com/support/r3608577-replacing_agitator_dogs


Replacement parts (if required) can be purchased at any of the following websites:

searspartsdirect.com
pcappliancerepair.com
appliancepartspros.com
repairclinic.com

Prices vary between sites, so shop and compare. The first three sites I listed also include helpful exploded view parts diagrams to assist you in locating and properly identifying the parts you may need. If you do not wish to order parts on line, use the part numbers from the Sears website and go to your nearest appliance parts retailer. Most of these parts are commonly sold as part of their in-store inventory.


If your model number differs from the one you posted this question under, please post back with your correct information and the malfunction symptoms you may be experiencing. I hope this helps you.

Apr 22, 2011 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Only using cold water and light turned of


You posted under Bosch electric tankless.
I don't know specifically how to fix your tankless from information given.
Tankless problems can be simple or complex, and include internal and external factors best gauged by experienced service technician who is there and can put hands on the appliance.
You can also glean information from the service technician how to best maintain your tankless unit, since they require yearly maintenance, such as de-liming.

Open following link for Bosch tankless troubleshooting resources, including Bosch contact information, typical manuals, error codes, tech support, parts, fuel-saver calculator, service bulletins, water heater forum, fixya links, disclaimers, and links for finding service technician.
http://waterheatertimer.org/Troubleshoot-Bosch-Tankless-water-heater.html

Add a comment for more free help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you while you work on water heater or any do-it-yourself project.
Fixya is always less expensive than a service call.

Mar 21, 2011 | Bosch PowerStar AE115 Tankless Water...

1 Answer

My 85000 is older and has a gas sensor and copper tube conneced to the main gas valve. the problem is the same when I let off the start button the fire stops, some times it will operate for several minutes...


Is the fan coming on when you press the start button? If not, that's the problem. Or it may be inadequate gas pressure. These are just 2 of the most common issues. So, I have included a link to your Owners Manual, that you can download and print for future reference. Please pay close attention to the Trouble Shooting Guide part of the Owners Manual.

http://www.desatech.com/manuals/Construction%20Heaters/113893-01.pdf

Really hope this helps solve your problem. Please let me know.

Mar 09, 2011 | All-Pro SPC-85 Utility Heater

1 Answer

What is the product number for the belt


If the model number is correct, this Roper washer is manufactured by Whirlpool and does NOT use a drive belt.

If you are experiencing spin problems, it can have several causes. Most commonly, this is caused by either a lid switch malfunction or a broken motor coupling. The following link explains how you can diagnose the problem and repair it yourself:

http://www.fixya.com/support/r3965207-whirlpool_top_loader_no_spin_problem

If the problem is just the the agitator not working, but everything else does, you may just have a worn agitator cam assembly, worn agitator dogs, loose agitator bolt, or all of the above. The following link explains what agitator dogs are and how to access them:

http://www.fixya.com/support/r3608577-replacing_agitator_dogs

Whirlpool manufactured washers use a split agitator design. The top half is known as the "auger, while the lower half is the agitator. Between the two pieces is a cam assembly, with small teflon teeth known as "dogs". There's also an agitator bolt that holds the entire assembly to the center post.

If the auger (top half of the agitator) is slipping, I would suspect the dogs or cam assembly need to be replaced. The part number for the dogs is included in the link I provided. For a little more you can purchase the entire cam assembly which includes the dogs, the cam, the cam seal and thrust bearing.

If the entire agitator appears loose or slipping, check the agitator bolt to ensure it is tight. DO NOT overtighten as this can restrict movement of the agitator or damage it. Tighten until snug.

Replacement parts (if required) can be purchased at any of the following websites:

searspartsdirect.com
pcappliancerepair.com
appliancepartspros.com
repairclinic.com

All these sites are reputable and offer great service with competitive pricing, so shop and compare. The first three sites I listed also include helpful exploded view parts diagrams to assist you in locating and properly identifying the parts you need. If you do not wish to order parts on line, use the part numbers from the Sears website and go to your nearest appliance parts retailer. Most of these parts are commonly sold as part of their in-store inventory.


Read through the information provided and let me know if you have any questions. If this was meant to be a DRYER QUESTION, please post back with your MODEL NUMBER, so I can provide you with the information you need (Whirlpool dryers use drive belts). I hope this is helpful to you.

Jun 22, 2010 | Roper RAS6233KQ Top Load Washer

1 Answer

Water will not shut off


The problem you are experiencing is commonly attributed to either a leaking water inlet valve, or a pressure switch malfunction. The following link explains how to diagnose the problem and repair as necessary:

http://www.fixya.com/support/r3753517-whirlpool_top_load_washer_fills_when_not Replacement parts (if required) can be purchased at any of the following websites:

searspartsdirect.com
pcappliancerepair.com
appliancepartspros.com
repairclinic.com

All these sites are reputable and offer great service with competitive pricing, so shop and compare. The first three sites I listed also include helpful exploded view parts diagrams to assist you in locating and properly identifying the parts you need.

If you have any questions, please post back and let me know. I hope this helps you.

Apr 01, 2010 | Kenmore 24032\24036 Top Load Washer

1 Answer

Power problem on Pioneer Pro-700HD


The failure is not on the power supply but the convergence amplifiers STK ICs have the 24 volts shorted.
If that fuse is blowing, de-solder the convergence ICs and put a new fuse to power up the TV; you should see distorted video when the TV powers up and the fuse should not blow.
The service manual migth not help much in this case since the failure is easy to pin point.

Good Luck.

Oct 03, 2008 | Pioneer PRO-700HD 64" Rear Projection...

3 Answers

All-Pro Kerosene Heater


I have a 100,000 allpro Kerosene heater I get sprake but won't lite I need help Thanks

Dec 12, 2007 | All-Pro Kerosene Garage Shop Heaters - All...

Not finding what you are looking for?
All-Pro Kerosene Garage Shop Heaters - All Pro PK115T Forced Air Kerosene Space Heater Logo

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top All-Pro Heating & Cooling Experts

paulcarew

Level 3 Expert

2364 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Mack Baxter

Level 3 Expert

381 Answers

Are you an All-Pro Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...