Question about Technics Audio Players & Recorders

1 Answer

I have a technics and everytime i plug in it keeps clicking but nothing else the power button lights up

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 85 Answers

I dont know what kind of clicking is being heard. It might sound like a dead power transformer not clicking over. Or it might be you have some crossed speaker wires. If you did any kind of rewiring recently remove and cut off 1 inch on all ends of speaker wire at receiver end as well as speaker side and twist nice and tightly to not allow any stray wires from crossing over to the other terminals. Sometimes speakers have a protect mode when it sees a crossed cable. I am not quite sure but it is a good place to start looking. Good luck.

Posted on Feb 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello. Today i decided to fix my parrents old old Technics new class a amplifier, but it wouldnt turn on. When i pushed the power button nothing happened.


First you need to check the wiring to the plug and any fuses. If these are good, Then take the top cover off and look around for an internal fuse. Also keep your eyes peeled for any sign of damage or signs of burnt parts.

Aug 13, 2013 | Technics Audio Players & Recorders

1 Answer

I keep getting a printer error 1500 on my canon printer. I reset like it says and it still keeps doing it.


Part A: Cleaning the waste ink tank.
1) Open the front cover and power-ON, when the catridge come out from where it hiding, quickly unplug the power cord.

2) Use a tissue (preferred toilet tissue) to **** out the excessive ink in the waste ink tank in where the catridge hide. After you satisfy, close the front cover.

Part B: Reset the waste ink counter.
3) While pressing the ON button, plug in the power cord. The power light will be in orange/yellow. (This is mean it is in service mode).

4) Keep pressing the ON button, press the RESUME button 4 times. (The light change everytime you press it.)

5) Release both buttons, and restart the printer.

The printer should now operate as usual and stop blinking it LED.

Best of luck!

Sep 06, 2011 | Office Equipment & Supplies

2 Answers

I have an Acer 6920 and just yesterday I went to go turn it on with the power supply plugged in and connected to the outlet and the light near the power button flashed orange and my laptop wont turn on....


Sounds like a malfunction in your power supply. I would suggest contacting Acer support and informing yourself about the warranty on your device.
Don't forget to rate this comment - give me thumbs up if you liked this advice!

Mar 13, 2011 | Computers & Internet

1 Answer

My str-k502p stopped showing the lights on the front. everytime i plug it in it makes the clicking sound like its on but nothing shows up. when i try pressing the power button all that happens is the...


Check fuses on unit .Fuses should be on right side of amp .If all fuses are okay.If a fuse needs replacement .Replace with same type and always make sure unit is unplugged .Its possible unit needs repair

Jul 20, 2009 | Sony Audio Players & Recorders

1 Answer

No response


First follow procedure to try to reset the power.
  1. Unplug the ac adapter. Keep ac adapter unplugged.
  2. Remove the battery and keep the battery unplugged.
  3. Hold the power button down for 15-20 seconds. (Nothing will appear on the display and none of the lights will light up.)
  4. Release the power button and plug in the ac adapter ONLY. (Please note that a power indicator light should be lit on the ac adapter when it is plugged in).
  5. Normally power on the notebook.
  6. If the unit does not power on, remove the ac adapter and insert the battery into the system.
  7. Plug the ac adapter back into the system, the battery charging indicator light will light up.
    If the battery charging indicator light does not light up, the ac adapter may not be providing proper power to the unit, and may need to be replaced.

May 23, 2009 | Acer Computers & Internet

1 Answer

I have a GE small unit that is 5 to 6 years will not start up


About the only thing can suggest is see if a lamp or other will work in the outlet that you have the AC unit plugged into.

May 07, 2009 | GE AJCQ08ACB Air Conditioner

1 Answer

Will not play , loud clicking noise. No lights nothing.


Ther clicking is probably coming from a relay and it is cycling because either the power supply itself or possibly an audio output power module has failed, the latter will overload the power supply so it tries to protect itself by interrupting either the AC or a DC voltage supplied by it.
This problem will likely require the hands-on of technical help. 

Jan 01, 2009 | Sharp XL-HP515 CD Shelf System

3 Answers

Everytime I plug my Sansa e250 in it freezes


You can press and hold the power/menu button for 20 seconds. This will force the player to shut off. Restart it, if you are still having problems, try the following. Run the recovery tool from the SanDisk website. Make sure you select "format" when prompted. http://www.sandisk.com/Assets/File/Downloads/firmware/e200fw01.00.12.exe You need to put the device into "recovery mode" before you run the tool. - Turn the device off (hold power for 20 seconds) - Slide the hold switch into "hold" position. - Press and hold the "record" button while connecting it to your computer. Keep holding the "record" button until you see the "new hardware found" on your computer. Then run the recovery tool. Select format when prompted. Best of Luck.

Sep 22, 2007 | SanDisk Sansa e250 MP3 Player

2 Answers

TV Won'T Turn On


A fuse is not your problem. this TV has a safty feture that when it senses a problem it cuts the power to prevent any fouther damage, when you un plug it the TV resets and it will turn on agian. I have the same TV Check the CRT light guns there are 3 of them. If one goes bad it will cause your problem.

Sep 22, 2007 | Panasonic PT-51HX41 51" Rear Projection...

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Technics Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4861 Answers

T-Comtech Repairs
T-Comtech Repairs

Level 2 Expert

417 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Technics Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...