Question about Hoover HDC7FM Dryer

1 Answer

Dryer works fine but does not heat up

Ive got a hoover dryer it works fine but does not heat up ive cleaned the filters and everywhere else but it stillwont heat up to dry the clothes.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 32 Answers

Hi, looks like there's 1 of 2 faults. Either the stats or the heating element. They are located at the back of the TD, covered bi a screwed panel. If you have a multimeter, turn it to buzz and check the connections. If the meter buzzes it's ok, if the meter doesn't buzz it's dead and needs replacing.
Cheers

Posted on Feb 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi there is No heat from my dryer


if the filter care light is on and doesn't go off,you need a new element,

Jul 16, 2014 | Hoover Dryers

1 Answer

Beko condensor dryer not emmiting any heat but still 'working'


Stat or heater check power if it is a 220 volt machine may have one side down on power

Dec 03, 2013 | Zanussi TC7102W Electric Dryer

1 Answer

Hoover hvc 180 not drying clothes


You will need to check the internal, as well as the external vent line for lint buildup.

Apr 28, 2012 | Hoover VHC391 T-80 Dryer

1 Answer

Filter light comes on after cleaning nothing happens and no heat


clean the sensor beneath the lint trap, be careful as not to damage it

Mar 13, 2011 | Hoover HDC7FM Dryer

1 Answer

My hoover tumble dryer Hnc175 wont heat up,is still working as normal, just no heat, i have cleaned out the filters and still not working


Heating elements can fail. These are relatively easy and economical to replace. The heating element is not necessarily the culprit if your tumble dryer does not get hot, however. There are thermal overload cutouts fitted to many machines. If they fail, the current will not be passed to the heating element. Replacement is again, fairly straightforward.
Tumble dryers will often have thermostats fitted. A heater control one, and an exhaust thermostat. The first keeps the temperature correct. The second, as its name suggests, monitors the temperature of the exhaust (in case the airflow in the machine is impeded) Once again, replacement is not too much of a problem.

http://www.repairclinic.com/Dryer-Troubleshooting
Please look, at the link above, it will show you how to perform troubleshooting. procedures and repair.
If you feel you don't want to do it yourself, please call a Hoover Tech, and get it looked at. Ask for a "Quote" for the repair, so you get an idea of whats what.

Apr 08, 2010 | Dryers

1 Answer

The machine keeps saying clean out airways yet there is no fluffy stuff on the filters i have hoovered them out as well


Remove all 3 filters, half moon filters below door, filter in door and heat exchanger from front of appliance and rinse under warm water dry and refit.

Nov 17, 2009 | Miele Novotronic T230C Electric Dryer

2 Answers

Dryer will not heat. lint filter is clean. dryer runs fine bosch dryer nexxt 500.


Hi, If you have a gas dryer2_bing.gif.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...

Gas Dryer2_bing.gif not Working Gas Dryer2_bing.gif Not Heating
http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

If your dryer2_bing.gif is electric2_bing.gif..
There could be a number of different problems...
Check out this tip that I wrote about this problem...

Dryer2_bing.gif Troubleshooting2_bing.gif Electric2_bing.gif Dryer2_bing.gif won t Heat
http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

heatman101

Nov 08, 2009 | Bosch Nexxt 500 Dryer

1 Answer

Hi the my filter light keeps flashing and iv got no heat!


My guess is that the heater element has gone out. There could also be a lint clog in the exhaust vent...it takes air out through the filter...across the heater element....and back through the tumbler to heat the clothes. This is usually what causes heat elements to go out is the excess lint that gets on them and causes them to overheat and burn out!

Dec 14, 2008 | Whirlpool LEQ8000JQ Electric Dryer

1 Answer

Hoover Dryer 5030D does not heat up


huuum At your service!

Sometimes this can happen when the vent line is clogged.


1. Check if the lint filter is full and needs to be cleaned.
Try this first.
2. Then check if the outside screen covering the exhaust vent if this is even half blocked
with lint there will be no heat! This screen is to keep small animals out!
Try checking this and if it is clogged or the spring loaded door is stuck closed.
Try to clean the lint out of the corners of the flap door,
and or remove the screen permanently!
NO ANIMALS LIKE TO GET BURNT,IT'S HOT IN THAT TUBE! They sense this and stay clear.
It is 2 years that mine is off and all is fine.





You will be fine
Bless You huuum
PLEASE GIVE ME A GOOD RATING BEFORE YOU SIGN OFF!

Oct 06, 2008 | Whirlpool Duet 7.0 Cu. Ft. Super Capacity...

Not finding what you are looking for?
Hoover HDC7FM Dryer Logo

Related Topics:

372 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Dryers Experts

Tim Whalen

Level 3 Expert

3056 Answers

yadayada
yadayada

Level 3 Expert

60985 Answers

John Tripp
John Tripp

Level 3 Expert

4636 Answers

Are you a Hoover Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...