Question about Philips Magnavox 51MP392H Rear Projection Television

3 Answers

Phillip magnavox Screen Problems

I have a phillip magnavox 54 inch it is about 10 years old. The tv comes on, audio is fine but the picture is squeezed into the middle of the tv. The picture goes from top to botton but is only a few inches wide.

Posted by on

  • monte_311 Feb 19, 2009

    I have already taken off then screen and cleaned the mirror and projectors

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

This is total board failure. were talking all IC components plus optical assembly issues as well. I sense diode issues as well. i recommend a total main board replacment.

Posted on Feb 19, 2009

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,550 Answers

You need to replace the horizontal IC in your tv .

Posted on Feb 19, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,110 Answers

You have convergence output failure. The output ICs will need to be replaced and possibly a small component like a resistor or two as well. Expect to pay a service company $350-$450 to resolve this.

Posted on Feb 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My lg plasma tv is cutting off the edges of the shows we are watching. I cant find a setting that will take care of it. Can you help


hmm normally these settings are found in the picture settings of the set top box or just a setting in the tv's picture settings now there might be an option to say fill screen that may work best for some or leave the tv in 16:9 some broadcasts may only be in 4:3 at times this is normal broadcasting and not much can be done unless the setting on the picture option is set to fill screen

Jan 08, 2017 | LG Televison & Video

2 Answers

Sony Bravia flat screen TV when turned on has black screen. Green light on the bottom is lite up, electric plug is plugged into house socket, no picture only black screen.


If audio is OK, the fault is with its backlight section. If audio too is absent, the fault is with its digital main board. If you wish to get more details visit the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
http://homenol.blogspot.com/

Jan 08, 2017 | Sony Televison & Video

1 Answer

I have pioneer plasma tv about 6 years old. I turned the power on, sound but no picture. Do you think it is worth fixing?


no
plasma tv units consume considerable power and the latest led units don't so for the extra cost of a new unit , there will be a power saving over the years

Jan 08, 2017 | Pioneer Televison & Video

2 Answers

I have sound but no picture on my tv


This is a popular question. Most of the time you either need to make sure all connections are not loose or just need to turn off your tv and receiver and unplug. Wait for 1 minute then reboot.
I recommend this short video as it walks you through some diagnostics for other possible problems.
Repair TV With Sound But No Picture

Nov 24, 2015 | Luxor Televison & Video

1 Answer

I have checked cables and different methods of connecting, but the white and red audio out of my PVR appear to have stopped putting out sound.


Go through the setup of the PVR and check the sound settings. It sounds like it's only producing digital audio, that's why it works with HDMI but you want analog, so set the audio to stereo, or try every setting to see what works!

Jan 19, 2015 | Televison & Video

1 Answer

5 digit number for phillips tv


The 5-char Direct Philips Magnavox Universal Remote Code Entry is: PM335.

the Phillips tv (3 digit) code choices are: PHILIPS ..... 002 009 109 202 209 210 310 402 408 508 510 807 901 914 917

Hope this helps! (Here's the link to same...)

Jul 09, 2014 | Televison & Video

1 Answer

TV turns on fine but turns off in 5 to 10 mins


Yes, this normal, by the lack of detail shown in your question. Once you press any key it should come back on unless it is set to turn it self off while in sleep mode. This is to protect the display from creating burn in setting.

Oct 27, 2013 | Televison & Video

Not finding what you are looking for?
Philips Magnavox 51MP392H Rear Projection Television Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69878 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...