- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1:- Select Clock Adjustment mode
Press the top or bottom side of the Control knob. Select the "ClK ADJ"/ "ClCK" display.
2:- Enter Clock Adjust mode. Press the centre of the Control knob for at least 1 second.
The clock display blinks.
3:- Adjust the hours. Press the top or bottom side of the Control knob.
Adjust the minutes Press the right or left side of the Control knob.
4:- Exit Clock adjustment mode, Press the [B.BOOST] button.
Now whats the time, Gotta get my tea.
change the tune mode to standby mode. Then press menu button for few second until clock word is displayed on the screen. Afterward, press the center of the main control button on the right side of the stereo system. The time is now blinking and you can start set the time by pressing upward & downward button for hour and left & right button for the minute
press and hold menu button for two or three seconds to enter menu, then
use am and fm buttons to scroll up and down. when you get to set clock
press seek up for two or three seconds and then use am fm seek up and
down to adjust time.
have to push the src button until the screen reads standby the hold in the vol. button until something shows up use the joystick to go left right up or down until it says set clock or clock or something then use the vol key to set it to what the time is
If I remeber correctly, I did a bunch of these at the shop and you need to be in standby mode. Hold the menu button. a new menu will come up and you should be able to set the clock there also if you like the annoying beeps that it does you can also turn that off. And while you are at it turn off the DEMO mode unless you like it. I hope I could help.
I've found the manual to be inaccurate as far as setting the clock. To display the clock, hold down the right knob, then choose Freq or Clock. Push again to set. Easy.
To set the clock, push the source button until you're in standby mode. Hold the left knob down (volume ctrl) until menu comes up. Either push the left knob OR move the right up or down (can't remember which) until you see Clk Adj. Push the vol ctrl knob (I think). Then, the knob on the right goes left right for minutes/hours, and up/down for the other. I believe you can push the vol knob then once its set.