Hi. My router Netgear WGT624 v3 does not transmit the wireless signal. It happen after I pushed and hold the reset button at the back of the router for 5 seconds. After it restared no wireless signal being tranmitted from the router. The led indicator for Wireless (third from the top) also does not lights up. What should I do?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Netgear WGT624 V3 Wireless Router Problems
by BigG2 - January 16, 2007 1:17 AM PST
My wireless connection is not working and i cannot log on to it, I have connected a Netgear WGT624 V3 Wireless Router to my Motorola SurfBoard SB5101E Modem which is connected to Telewest Cable Broadband (internet works fine if i access directly through the modem), on the router the power light is lit and also the internet light flashes rapidly but the wireless light comes on for a couple of seconds and then goes out - i think this is the problem? I have tried logging on to the router to check the wireless settings but cannot access it, i have also tried connecting directly via LAN but cannot get this to work either although i am not sure if i have connected it correctly?
Any ideas/comments/advice is very much appreciated!!
the router can not find wireless it is a transmit device only. I think what you mean to say is your laptop is finding 2 wireless signals? if so which one is named the one you named? if you have not named one and this is your router go to 192.168.1.1 and it will ask for a log in. you need to be plugged in and not wireless to do this. admin is the name and password is the password. go into settings and name YOUR router. get a password and or make one and remember it this will get you logged on. if it does not go to a internet browser and type in www.routerlogin.com
either will take you to the support page of the router for net gear. if you happen to know the version which is on a sticker on the bottom it will help.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.0.1 or http://192.168.1.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router.
Let me know if you need further assistance. Thanks for using FixYa.
there is a little hole on the back to reset the router you need a paper clip to push and hold that.
Hold it in for 5 to 10 seconds until the light go off then blink.
Also reset you isp modem as well by unplugging it from the ac outlet
allow you modem to come up then reset the router.
if it still does not work you might have a issue with the router but please do try these steps.
Thanks and please rate using the 4 thumbs above.