Question about Logitech Webcam

1 Answer

Connection is made, camera shuts off, freezes picture.

Make connection, start conversation, camera shuts off, freezes that image of me, then comes back on. Make connection they can't hear or see me, but I can see and hear them.

Posted by on

  • Weldon Dube'
    Weldon Dube' May 11, 2010

    Let me know what messenger you are using and I'll be able to cure your problem. bud

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Also send this to your family and friends so they have their computer setup properly. Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:

  1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if Installed Properly will come up and show a video picture.
  4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://ca.messenger.yahoo.com/download/ ) set it up as follows:
  1. Click on Messenger at the top left and then go down to Preferences and then the Preference Window will come up.
  2. Next click on Calling and Devices. In the Calling & Devices on the right and set the Microphone and Speakers to the computer Audio Card or sound device installed in the computer.
  3. Just below that, go to the Test Audio section and (in blue writing) click on Open the call setup assistant” and follow the instructions on the left window.
  4. Then after completing the Audio Setup, go to down and click on Webcam it should BRODCSAST and you will see your picture.
  5. To Chat, click on MESSENGER and then
  6. After make necessary settings, click on APPLY, then OK.
  7. Then click on MESSENGER and go to my WEBCAM ready to use.
  1. Windows Live Messenger:
http://www.microsoft.com/downloads/details.aspx?familyid=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en
  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jul 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I review my pictures on my camera there are blank pages and the camera freezes up when I get to a blank spot. some pics have come through but not all. when I try to import to my computer everything...


Try to download your pictures to the computer. First make sure the camera has enough power to download the images without stopping. Connect the USB cable to the computer make sure the camera is off when you connect the mini USB end to the camera, then turn the camera on and depending on your computer operating system an icon will show on your desktop or in system preferences and an external hard drive. Once you have the pictures safely on your computer Hard Drive "eject" or click the icon to close and wait for safe to remove device )depends on system) then format the memory card always format the card or delete pictures in the camera not the computer.

Dec 28, 2010 | Sony DSC-S930 Digital Camera

1 Answer

No connection found


Try using a separate card reader to download your pictures to a folder you create on your desktop.

Aug 31, 2009 | Canon PowerShot S60 Digital Camera

1 Answer

Canon S3IS freezes when connected to the computer


1)You need to unplug the camera, turn it off. Then plug it back in, turn it on, and wait. If nothing comes up, go to "My Computer" and you should see the camera icon there. Double Click it and there you are.

2)Take your camera to a friends computer, plug it in if it works, problem is your computer.

Aug 28, 2009 | Canon Rebel XT / EOS 350D Digital Camera

1 Answer

I have a Canon EOS 350D, Compact Flash card freezes my computer


Instead of connecting via the camera, just use a USB card reader and put the CF card in that.

Mar 17, 2017 | Canon Rebel XT / EOS 350D Digital Camera

1 Answer

USB connection with the camera causes computer to crash.


Try using a different USB cable. The connections between cameras and computers usually are problematic. A card reader will allow you to download the pictures from the SD card, without problems and saving your camera's battery power supply

May 04, 2009 | Canon PowerShot A560 Digital Camera

1 Answer

Trouble Downloading Pics


Here are the steps to take.

1. Establish whether or not you have a connection between your camera/computer by going to your start button, control panel, system, hardware tab and device manager. The camera must be powered on and in playback mode (should automatically go to playback mode when connected, camera's screen should go black if there is a connection). Make sure you have a fully or nearly fully charged battery in your camera.

2. Once in device manager, look under Imaging Devices. If your camera is properly connected it should show up as Canon Powershot SD800. If it shows a yellow exclamation point, there is a driver issue, and even if it doesn't show a yellow exclamation point, you may want to update your driver anyway by right clicking and having the system search automatically for driver updates. If download of driver begins, great...once finished, restart camera and your problem may be resolved. There may also be a driver available for download on the Canon website if you log onto www.powershot.com and go to the download library, select your camera from the menu and select your operating system from the dropdown menu. Look for TWAIN or WIA driver.

3. If there are any other imaging devices, you may have to temporarily disable them to avoid conflicts.

4. If you have any other imaging software running, exit or close the program in your system tray (down by your clock in the right hand corner of your computer's desktop.

5. Try again to connect.

6. If you are on a desktop, try a rear usb port vs. a front port. You can also try a different port on a laptop. After each change, try restarting camera to establish connection.

7. Go to start/My Computer and look for the icon for your camera...you will be able to download images even without Canon software loaded onto computer so this is not a software issue if you have no hardware connection. If you see the icon, right click on it and choose Get or Import pictures. From there the default Microsoft scanner and camera wizard should launch and you will be able to import your images.

8. If still no connection, try going to Start/Run and type in services.msc here you are looking for 4 services to be running. Check under status of each service and make sure it reads that each of these services are started.
  • Canon Camera Access Library 8 (if Canon software loaded)
  • SSDP discovery service
  • Universal Plug and Play Device Host
  • Windows Image Acquisition
Once all of these services are started on your computer, restart camera once again. If any of the last three services are not on your computer or are not started, connecting will be a problem.

If all of these steps fail, try purchasing an SD card reader from your local electronics store for around $12 and download images from there. Canon also offers lifetime technical support for your Powershot, so give them a call if none of these steps work or if you would like someone to walk you through it.

Best of luck to you!
MrsJGreen

Jun 04, 2008 | Canon PowerShot A75 Digital Camera

2 Answers

I can not get my pictures to transfer.


Here are the steps to take.

1. Establish whether or not you have a connection between your camera/computer by going to your start button, control panel, system, hardware tab and device manager. The camera must be powered on and in playback mode (should automatically go to playback mode when connected, camera's screen should go black if there is a connection). Make sure you have a fully or nearly fully charged battery in your camera.

2. Once in device manager, look under Imaging Devices. If your camera is properly connected it should show up as Canon Powershot SD800. If it shows a yellow exclamation point, there is a driver issue, and even if it doesn't show a yellow exclamation point, you may want to update your driver anyway by right clicking and having the system search automatically for driver updates. If download of driver begins, great...once finished, restart camera and your problem may be resolved.

3. If there are any other imaging devices, you may have to temporarily disable them to avoid conflicts.

4. If you have any other imaging software running, exit or close the program in your system tray (down by your clock in the right hand corner of your computer's desktop.

5. Try again to connect.

6. If you are on a desktop, try a rear usb port vs. a front port. You can also try a different port on a laptop. After each change, try restarting camera to establish connection.

7. Go to start/My Computer and look for the icon for your camera...you will be able to download images even without Canon software loaded onto computer so this is not a software issue if you have no hardware connection. If you see the icon, right click on it and choose Get or Import pictures. From there the default Microsoft scanner and camera wizard should launch and you will be able to import your images.

8. If still no connection, try going to Start/Run and type in services.msc here you are looking for 4 services to be running. Check under status of each service and make sure it reads that each of these services are started.
  • Canon Camera Access Library 8 (if Canon software loaded)
  • SSDP discovery service
  • Universal Plug and Play Device Host
  • Windows Image Acquisition
Once all of these services are started on your computer, restart camera once again. If any of the last three services are not on your computer or are not started, connecting will be a problem.

If all of these steps fail, try purchasing an SD card reader from your local electronics store for around $12 and download images from there. Canon also offers lifetime technical support for your Powershot, so give them a call if none of these steps work or if you would like someone to walk you through it.

Best of luck to you!
MrsJGreen

May 02, 2008 | Canon PowerShot A530 Digital Camera

1 Answer

Logitech Quickcam pro 5000


Normal 0 How much memory do you have installed in your computer? It may need to be, increased, as this is likely to be the cause of your computer freezing, rebooting, times out, or shutting down.
Hope this is of some help. Bud

Feb 10, 2008 | Logitech QuickCam Orbit Personal Web...

2 Answers

SAMSUNG PICTURE FREEZE (LOOKS BLACK&WHITE)


I have the same problem... It turns B&W
I can still hear the sound... however I can still turn the tv off when that happens

Aug 28, 2007 | Samsung HLN617W 61" Rear Projection HDTV

1 Answer

Image on camera freezes


This look like an connection problem. You could try squeezing the casing here and there to see in the connector[s] resets- but failing that it is a repair shop job

Jun 02, 2007 | Kyocera Finecam SL400R Digital Camera

Not finding what you are looking for?
Logitech Webcam Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2644 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...