Question about Webcams

1 Answer

I HAD AZEBRONICS WEBCAM,NOW I NEED SOFTWARE - Webcams

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Copy this site and paste it in your browser

http://www.zebronics.net/downloads.asp

And then go to the Web Cam Model Number you have and select the windows
Operating system you have and download.
Instructions:
If your not sure you can look at the webcams and see which one looks like yours before downloading at this site http://www.zebronics.net/webcameras.asp Then go back and download the driver.
Then to install follow these instructions:
Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program. When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web, do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ ) set it up as follows:
1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
2. Then click on the Video Settings.
3. The camera if Installed Properly will come up and show a video picture.
4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able to see and her to you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html ) set it up as follows:
1. Go to Messenger at the top left and click on it.
2. Next go down to Preferences and click on it.
3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

C. Windows Live Messenger:
Go to this site http://download.live.com/?sku=messenger and download Windows Live Messenger.
1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
3. Next go to the Menu Bar on right side, click on “ “Action.”
4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger
Go to this site http://dashboard.aim.com/aim and Launch AIM AOL Messenger.
1. On the VIM sign-in window click on Edit.
2. Then click on Settings Enhanced IM.
3. Next click on Enhanced IM.
4. Then click on Audio Video.
5. The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.

Additional information to use with VIM settings,

Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts.
Notes:
· The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts.
· images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud

Posted on Aug 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My web cam is showing a black screen i dont know what to do i have windows vista


How to troubleshoot Webcams in Windows Vista?

If you are having difficulty getting the webcam to work, review the tips about using a webcam, and then follow the troubleshooting actions in this article.
Tips:
  • Do not enter standby and then wake the system immediately, before the power light turns yellow. If so, the webcam may not function correctly until the computer is restarted. To avoid this issue, allow the system to fully enter standby before waking up the system.
  • If you installed the webcam separately (it did not come with your Vista PC), make sure the webcam drivers and software are compatible with Windows Vista.
  • If you are using an external webcam, make sure you install any webcam software from the CD before you plug the webcam to your computer. Without the software, the webcam may not be recognized by your computer and this can cause error messages.
  • If the display is blank, the camera may have timed out. Turn the camera on again.
  • If the camera does not display Connected to computer, disconnect and then reconnect your camera.
  • Make sure the camera is set to Digital Camera in USB Configuration when trying to download images through some software.
  • Test your webcam in a different application to confirm if the issue is specific to that application. If the webcam functions properly in a different application, then contact the manufacturer of the video software for the latest drivers and for specific troubleshooting instructions.
  • If you have an external webcam, test it on another computer. If it functions properly on a different computer that has the same operating system, then you may need to install hardware drivers for your computer to work with the webcam.
  • If an external webcam fails to work on several computers, your webcam may be defective. Contact the webcam manufacturer for specific diagnostic information and troubleshooting instructions.
  • Your webcam may not work properly across some network firewalls. If you have trouble viewing or sending video to someone on another LAN or outside the network firewall, refer to the support information for the firewall or contact a network administrator for assistance.
  • Dial-up Internet connections often lack the data transfer capacity to handle both video and voice simultaneously. A broadband Internet connection is highly recommended for video messaging. Performance varies with dial-up connections.
  • For the best webcam experience, close all other applications and background tasks, and limit your Internet browsing or streaming to preserve bandwidth.

Step 1: Close all software before starting a new webcam session
Sometimes after you finish using the webcam in a software program, the program may not properly release the webcam for other activities in other applications, or even the same application. Sometimes you cannot use the webcam because it is being accessed by another program by default. So, if you are having a problem with your webcam, close the program you are using it in and then restart the same program or open a different program.
Step 2: Restart your PC
Sometimes, closing the software application that was using the webcam is not enough. Some webcam software cannot close the webcam for other applications to use later. When this happens, the webcam cannot be used by any other application until the computer is restarted.
Step 3: Select the webcam in your video viewing software list
Make sure USB 2.0 Camera or your Webcam is selected as the video input source in the software you are trying to use. The various software programs that can use the webcam use different terms for describing a video source and the option to select it can vary. Usually, camera, webcam, or video settings can be found in the preferences or properties pages for the software that uses the webcam.
If your PC includes a TV tuner, often the TV tuner is the default video input device. So, for example, if you are using Windows Live Messenger to have a video chat with your webcam, you need to select the your Webcam as the active input device because the TV tuner is the active video input device by default.
Example: Select webcam in Windows Live Messenger
To select the webcam as the default video input device in Windows Live Messenger:
1. Open Windows Live Messenger.
2. Click the arrow icon on the Windows Live Messenger toolbar.
3. Select Tools and then Audio and Video Setup .
4. Click Next, Next, and then Next again.
5. In the "Select a Webcam you would like to use" dropdown list, select the name that corresponds to the webcam that is installed on your PC (such as USB 2.0 Camera)
6. Click Finish.

Step 4: Download the latest drivers and updates for your webcam and your video software
Some webcams may not be recognized by some software programs unless you have the most recent drivers and updates for your webcam hardware and webcam video software. Also, if the video footage from your webcam is in a format not supported by your video software, you may need a third-party plug-in or utility to view or convert the video footage to a format supported by your webcam video software.
  • If you installed the webcam separately, go to the webcam manufacturer's website and download the latest drivers, updates, plug-ins, or conversion utilities for any webcam video software. Make sure the webcam drivers and software are compatible with Windows Vista!
  • If you are having problems getting the webcam to be recognized by video playing or editing software, go the software manufacturer web site to find and install any updates or patches.
  • Check Windows Update for any Vista-related drivers that may affect your webcam and your video software. Click the Start button, All Programs , and then Windows Update
Step 5: Make sure you have the correct Vista drivers installed
If you are having problems hearing sound or using your webcam, try the following steps.
Make sure you have installed the correct Vista drivers and not the generic sound driver in Windows. If you have installed the generic sound driver, uninstall the webcam video software and download and install this Vista sound driver, and then reinstall your webcam video software.
To update Windows Vista drivers:
  • Click the Start button, All Programs , and then click Windows Update . If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
  • Click Check for updates .
  • To see if updated drivers are available, click View available updates . Windows Update will list any updated drivers that are available for devices installed in your computer.
  • If updates are available, click the driver that you want to install, and then click Install . Follow any onscreen instructions to finish installing the available drivers.
You may need to set up the sound settings in your instant messaging program or any other video webcam software you are using with your webcam. Refer to the Help information in your webcam software.

Aug 15, 2010 | Logitech Webcam

1 Answer

Iam bought a new ENTER USB 2.0 Webcam. I installed the software as they given in the user manual. Now i connected my cam to my system USB. but my system is not recognizing the webcam. i checked with my old...


You need to find out what support software you need to download in addition to the Enter software
I run a Logitech and need Microsoft DirectX 10 to support it

Download this diagnostic software, plug in your webcam and see what it finds - Ignore the first Alert - I always get that

http://www.download32.com/webcam-diagnostics-d35065.html

Jul 29, 2010 | PC Concepts 300K Webcam

2 Answers

Need to install software for hp digital webcam model


don't have the disk that came with camera,how can i install on pc?

Mar 21, 2009 | HP PP136AA Webcam

2 Answers

Webcam software needed


Yes from labtec here>http://labtec-webcam-software.software.informer.com/

Dec 07, 2008 | Labtec Webcam Plus 0403

5 Answers

Enet webcam


i need enet webcam driver i lost the cd could you help me please.

Jul 16, 2008 | Creative Labs WebCam Live! Pro

8 Answers

Lost my webcam installation cd


Click HERE to get Logitech drivers for your webcam.

Jun 04, 2008 | A4tech Xmaster PK-835 Webcam

6 Answers

Webcam Driver software


i need lenovoY410 web cam driver

May 05, 2008 | Xirlink Promax Webcam

11 Answers

I lossmy webcamerra cd software


I lost my software to install my webcam....what can i do?

Dec 05, 2007 | GE EasyCam Webcam

Not finding what you are looking for?
Webcams Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Webcams Experts

micky dee

Level 3 Expert

2630 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...