Question about Printronix Line Matrix P5005B Printer

1 Answer

Hardware may be

There is one error .realated to shuttle.
on screene (shuttle jam,see manual) ]


plz solute

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

First of all do one thing and that is keep your platen marked A,B,C in b or c position then start printer if it prints then it means your shuttle gets very much tight in position A, for that please switch off the printer remove paper and loose your shuttle and adjust your shuttle according to the movement of paper. also do one thing that is clean your shuttle senser also.

Posted on Feb 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Carriage Jam Error on HP Printer There is nothing much to do if you get a...


Carriage Jam Error on HP Printer

There is nothing much to do if you get a Carriage Jam error. We can give a try to solve it ( Usually carriage jam error results in Hardware failure )

Follow the instructions below to resolve Carriage Jam issue.
  1. Turn off the printer.
  2. Open the rear access door ( or duplexer )
  3. Check for any bits of paper stuck, if so, remove them.
  4. Open the front access door where you see the cartridges. Check for any paper pieces, if so, remove them.
  5. Move the carriage manually 5-6 times from left to right.The carriage should move freely. ( Do not apply force )
  6. If the Carriage does not move freely, try to remove the cartridges and close the rear and front access door.
  7. Power on the printer and it will prompt you for missing cartridges.
  8. Install the Cartridges.If it does not prompt you for cartridges missing, you will find Carriage Jam Error on the screen
  9. This indicates the printer is faulty and needs repair

In any condition if you are not able to fix the issue, Contact HP ( 1-800-474-6836 ) If the printer is In-Warranty please contact HP for replacement. HP may charge for repair for Out of Warranty printer

Regards,Ron


Please rate this solution if it resolved your problem

on May 20, 2011 | Printers & Copiers

1 Answer

Shuttle fault


If the printer detects the shuttle moving at the incorrect frequency, it shuts down the shuttle and attempts to restart it.
If the shuttle still operates incorrectly after three consecutive attempts, the Printer goes Offline, and the Shuttle Fault message is displayed.
Press the Clear button, then put the printer back Online. If this doesn’t work, turn the power switch off, then back on again.
If the error is still seen after performing the above actions, check there are no paper jams , labels etc or ribbon jams that may prevent the shuttle moving correctly. Also check the Patten gap to make sure it is not closed too much.
Then you may need to change shuttle components

Dec 04, 2009 | TallyGenicom 6306 Matrix Printer

1 Answer

3 yellow flashes, then 1 green on a Canon PIXMA Ip4000


3 flashes is a GREAT symptom report. We need some more than that, but it does give us a direction.

If this is a "Service Call Error", it will be accompanied by an on screen message that includes a "6000" error code.
Here are the possible solutions....
- Timing sensor unit (QM2-1213)
- Timing **** disk film (QC1-4833)
- Feed roller ***'y (QL2-0598)
- Platen unit (QM2-1215)
- Logic board ***'y (QM2-1548)*1
- PAPER FEED MOTOR (QK1-0550)

These solutions are not for the novice, but are user servicible for many out there.

If this is a "Operator Call Error", it will also be accompanied by on screen error codes

Paper jam. [1300]
Paper jam in the under guide. [1304]
Paper jam in the rear guide. [1303]
Solution: Remove the jammed paper, and press the Resume/Cancel
button.
OR

Front door closed. [1250] Open the paper output tray.

Get a free copy of the service manual by contacting me at www.Equipmentcity.net

Sep 29, 2009 | Canon PIXMA iP4000 InkJet Photo Printer

1 Answer

Shuttle jam appear


www.oki.com.tr/binaryData/13882/OKI_UM_250011A.pdf

in this pdf u have got the problem solve the shuttle jam problem

Apr 01, 2009 | Printronix P7010 Printer

2 Answers

Error 058 Shuttle Jam on an IBM 6400 Matrix printer


Normal 0 I suggest you get a sheet of Card Stock (Heavy paper) and place it in the feed way. Then press the print button applying a slight amount of pressure on the Card Stock so it will feed through the printer. The reason for this is in some cases I have been able to clear the paper track of debris that was deposited there over time.
Worth a try, as I have fixed a number of printers this way, saving costly repairs.
Hope this helps. Bud

Jan 06, 2009 | IBM 6400 Matrix Printer

1 Answer

058 SHUTTLE JAM "ERROR"


See this post:

http://www.fixya.com/support/t746596-shuttle_jam_see_manual_problem

Jul 09, 2008 | Printronix Line Matrix P5210 Printer

3 Answers

"Shuttle jam" see manual problem on Printronix line matrix P 500E printer


Verify that there is nothing clamped between the platen and the shuttle.

Last time I had this fault, it turned out to be a broken wire in the harness that connects the CMX board to the shuttle module.

Other possibilities include a failed shuttle or CMX board.

Steve W
LazerTek LLC

Jul 06, 2008 | Printronix Line Matrix P5005B Printer

1 Answer

058 shuttle jam


Hi,
This can happen for a number of reasons.:-

a. The print mechanism needs to be adjusted ( You'll need a technician to do this if yu are not familiar.

b. Something is clogging the print mechanism, eg Old ribbon residue, or sticky labels etc.

c. The paper thickness lever is set to incorrect setting . Try adjusting it out .

Aido

Jan 18, 2008 | IBM 6400 Matrix Printer

Not finding what you are looking for?
Printronix Line Matrix P5005B Printer Logo

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printronix Printers & Copiers Experts

Toby
Toby

Level 1 Expert

34 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Waheed Hudewale

Level 2 Expert

209 Answers

Are you a Printronix Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...