Question about BenQ FP531 15" LCD Monitor

1 Answer

On startup the screen shows ( out of range )

How do I set the screen settings what should they be on ?

colour : 32 or 16
pixels : ???

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 126 Answers

It means your system display card settings are too high for your monitor. Boot your system into safe mode and set the display settings lower. Right mouse button click on an empty space on your desktop and go to properties. Then settings->advanced and you should be able to adjust the vertical frequency down to 60hz or 72hz. If not, then go to the monitor tab and load a generic monitor driver.
One time, I bought a repackaged display card that had been set too high and I had to reload the card driver in safe mode to get it to work correctly.
pls rate my solution
thankyou for using fixya

Posted on Feb 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Soyo monitor MT-NI-DYLM1998 "out of range."


Your windows 7 screen resolution is set too high and your display doesn't support it. There are 3 possible solutions to this problem:
1. Press F8 during startup and choose "Enable row-resolution video"
2. Press F8 during startup and choose "Safe mode" and change screen resolution there, then reboot.
3. You can always use another display (if you have one) to set screen resolution to lower value.

Oct 15, 2012 | Soyo Computer Monitors

1 Answer

How to adjust color of screen


click start control panel,display,settings you can make adjustments for more or less pixels or from the drop down list pick the appropriate level of color range

click start control panel,display,desktop you can select a different desktop from the drop down list also there should be a browse button where you select your own personal picture saved in my pictures also settings you can change the settings for more or less pixels or from the drop down list pick the appropriate level of color range or troubleshoot also select advanced then general dpi normal size,larger size or custom settings
always click APPLY after making any changes


hope it helps

May 15, 2012 | Hannspree HF225DPB 21 inch LCD Monitor

2 Answers

My screen is connected to my computer--suddenly the screen shows pages too large and blurry. I can't recall how I resolved this problem when I first bought it and connected it to my PC. I'm missing...


click start control panel,display,desktop you can select a different desktop from the drop down list also settings you can make adjustments for more or less pixels or from the drop down list pick the appropriate level of color range or troubleshoot also select advanced then general
dpi normal size,larger size or custom settings
hope this helps

Jan 07, 2011 | Samsung SyncMaster 740N 17" LCD Monitor

1 Answer

When i put the computer to max resolution, i get blue pixels flying around in the left of the screen!


control panel,display,settings you can make adjustments for more or less pixels or from the drop down list pick the appropriate level of color range or troubleshoot also select advanced then general
dpi normal size,larger size or custom settings
hope this helps


control panel,display,settings you can make adjustments for more or less pixels or from the drop down list pick the appropriate level of color range

Nov 01, 2010 | Acer 22" X223w LCD Monitor

1 Answer

Out of range


Your windows video settings are for a monitor that has more capability (eg more pixels/finer resolution, higher refresh rate, more colour bits than the current screen can handle so it's spit the dummy.

Run your computer in safe mode (I believe that uses basic video driver) and set the video display options to a very low level, then re-start your computer again in normal mode, and set the options to the native resolution, refresh rate etc of the monitor. These should be listed in the specs that would come in the box with it (may be resolution: 1,680x1,050)

Sep 13, 2009 | ViewSonic VX2235wm LCD Monitor

2 Answers

Monitor displaying out of range message


Hello and Welcome to FixYa!

This usually happens when you select a resolution or a refresh rate that is beyond the monitor range. For example if your monitor supports a max. resolution of 1024x768 then if you give it a signal of 1600x1200 it will display out of range.

Solution of this problem is to reduce the resolution or refresh rate frequency.

Changing screen resolution in Windows XP: First right-click on the desktop and then left click on Properties from the menu that appears.

The display properties dialogue box will appear as shown in fig 1.1 below, click on the settings tab at the top right of the box.

xp-screen-resolution-1.gif

The areas worth noting are:

Screen Resolution
This slide bar is what you use to change the resolution, the options you have will depend on your graphics card and monitor, but the standard options are 800x600, 1024x768 and 1152x864.

Normally the default (in XP) is set to 800x600 which means the display will be 800 pixels wide and 600 pixels high.

How to Change the Screen Refresh Rate of Your Monitor loadTOCNode(2, 'summary');
  1. Click Start, click Control Panel, click Appearance and Themes, and then click Display.

    Alternatively, right-click the desktop, and then click Properties.
  2. Click the Settings tab, and then click Advanced.
  3. Click the Monitor tab, and then click the screen refresh rate that you want to use.
NOTE:
  • The default refresh rate setting is 60 Hertz (HZ); however, your monitor may support a higher setting. Check your manufacturer's documentation for information about the settings that your monitor supports.
  • If you use a higher refresh rate, you can reduce the rate that your screen flickers; however, if you specify a refresh rate that is too high for your monitor, your screen may become unusable and your hardware may be damaged.
  • Changes to the refresh rate affect all users that log on to the computer.
Source:
http://www.helpwithpcs.com/tipsandtricks/changing-screen-resolution-win-xp.htm
http://support.microsoft.com/kb/311403

Kindly rate me if i was helpful.
Regards,
Waqar

Aug 25, 2009 | Hansol Computer Monitors

2 Answers

Black colour displaying become greenish and narrow vertical lines


Most LCD monitors have a default refresh rate of 60 Hz. Older monitors also have limited resolution. Please check your display settings and ensure you're not using a refresh rate higher than 60, or a resolution higher than what it supports. If either one is the case, you're lucky the LCD still works.

Aug 12, 2009 | Computer Monitors

1 Answer

Monitor displays Msg. frequency out of range, screen is black


Start your computer and press the F8 when the manufacturer's logo screen is showing. This will bring you to the Windows startup menu. Pick "start in VGA mode" and windows will start up with video settings you monitor can handle. Then you can change your video settings so Windows will start normally with your monitor.

Mar 31, 2009 | Compaq Computer Monitors

2 Answers

Out of Range message displays when PC boots


The settings that you have for you tower needs to be changed if you have a old monitor connect that to the tower then right click on your screen go to settings and set it real low once this is done connect the new monitor up and set where you would like it,

The out of range is just letting you know that the settings thats set the monitor can see

Mar 12, 2009 | Westinghouse 22" Widescreen LCD Flat Panel...

1 Answer

Medion monitor shows analog out of range and will not turn on


Two options here. 1) Boot into safe mode, open control panel, display, settings, change the screen resolution to the lowest setting and color quality to their lowest setting and reboot. If that works move your setting up to where you used to have it (i.e. 800x600 pixels. Another option is to use System Restore to restore your system to an earlier date...a program you recently installed could be the culprit. System Restore is located at Start, All Programs, Accessories, System Tools.

Jan 14, 2009 | LG Flatron L1750S 17" LCD Monitor

Not finding what you are looking for?
BenQ FP531 15" LCD Monitor Logo

671 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Computer Monitors Experts

Tony

Level 3 Expert

2598 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a BenQ Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...