Question about Canon imageRUNNER C3200 Copier

1 Answer

Problems with Canon IRC3200 printing issues

Hi,
I have purchase a used IRC3200 Canon. Few thingsI would really appreciate if somebody would help me out on.
1. How do I get into see what count is on the existing drums?
2.When Printing it keeps dropping the paper before it gets to the fuser unit. Any ideas why it is doing this?
3. When it does print out there is shadowing on some pages and also identical wavy streaks on the pame part of each page. Again any ideas ?
This machine was lying up for a few months so not sure if this is anything to do with it.
thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 153 Answers

You need to go into servie mode to check the drums, your problem is you need a drum unit if the copiers are shading.
canon tech

Posted on Apr 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant get the canon imagerunner c3220 to print from imac macosx -10


This is a tricky one. The newer MAC OSX does not like the older printer drivers. It usally requires extra software from Apple to deal with these products. Now that being said it should load by itself. I can tell you without a doubt you can not use the self installer as it will fail each and every time. To keep it simple get ip address of the iRC3220 and go in to you printer install and point it to the PPD file which you can get from the Canon website. Final point... There is a different PPD for iRC3200 with Fiery (C1 print controllers) and one without. They are not cross compatible. You will see iRC3200 with C1 and one just saying iRC3200. Pick the right one. Oops one more point the Queue name will be just the word print. Good Luck.

Jun 22, 2011 | Canon imageRUNNER C3220 Color Copier

1 Answer

Hi I have a Windows 7 (64 Bit) laptop and im


Please check the driver weather its support Win 7 64-bit or not, because Win7 have 2 varians 32-bit and 64-bit. If its not support 64-bit windows, you can download new driver but must be compatible with 64-bit system. Even if its the latest version of driver, but not support 64-bit system it won't be work.
You can download driver from here :

http://software.canon-europe.com/products/0010891.asp

or here :
http://driverscollection.com/?H=PIXMA%20MG6150&By=Canon (choose Windows 7 64-bit).

Uninstall the driver from your PC then reinstall with the new driver.
Hope this help.

Mar 09, 2011 | Canon PIXMA All-In-One Photo Printer with...

1 Answer

IRC3200 - Color Printing Distorted


hi

check your counter if already reach 2k
its means you need to replace the itb belt or assy


any question just leave a message

May 21, 2009 | Canon imageRUNNER C3200 Copier

2 Answers

Manual/Drivers and software for a Fiery on a Canon IRC3200


ok the driver for the printer is at imagerunner.com support/ drivers/ office-production then look for imagepass E-1 im assuming you have a print controller attached to the copier. i think you can also get the guides there also for the fiery... Not sure about manuals for the copier never looked

Dec 10, 2008 | Canon imageRUNNER C3200 Copier

1 Answer

Canon IRC3200-RIP board not work and unknown brand


the box that you find at the back of the machine is called fiery you can configure that when you press the arrow key top right of the screen panel. you will the option of the fiery. make sure the power of fiery is connected

Dec 10, 2008 | Canon imageRUNNER C3200 Copier

2 Answers

Colors stop printing


it could be down to the cartidges, if they are non canon orginal this could cause the fault, if they are canon cartridges it could be down to the purge unit no working corretly,

i know you have spent money already but it might be wise to spend 130 english pound with a years warrenty from canon and buy a new machine.

I hope this helps

Oct 21, 2008 | Canon PIXMA MP780 All-In-One InkJet...

1 Answer

Canon imagerunner c3200 stuck in processing data


If you don't print via a server,you can turn the iRC3200 off...then back on and that will clear the print jobs.
If after doing this it STILL has a traffic jam in the print que when trying to print the same document then stop sending THAT particular document as the document has a formatting issue and NOT the printer.
If you DO use a print server then you(or your I.T Professional) need to go to the server and clear the print jobs from the server.

Aug 06, 2008 | Canon imageRUNNER C3200 Copier

1 Answer

CANON IRC3200 NOT COMING OUT OF WAIT


when stop printing you should have posted the problem then, you probable damage the board, you need to replace the booth rom first

Jul 01, 2008 | Canon imageRUNNER C3200 Copier

1 Answer

Canon IRc3200 pdf printing issue


base on my experience, that kind of problem occur when some programs on the driver was skipped during the installation. you can try to unstall the driver then reboot and then reinstall it again. this might solve your problem.

Sep 18, 2007 | Canon imageRUNNER C3200 Color Printer

Not finding what you are looking for?
Canon imageRUNNER C3200 Copier Logo

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96467 Answers

old marine
old marine

Level 3 Expert

1463 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...