Question about Royal MS 25 Typewriter

1 Answer

Resetting the margins on a manual typewriter.

I just bought what i'm fairly certain is a Royal Safari manual typewriter. When i press the MAR. REL button it lets me change the margin on the left side, but it wont go past the center of it going towards the right. How do i reset the margins on both sides?

Posted by on

  • Anonymous Apr 17, 2016

    How did you get the left margin to reset?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 46 Answers

I can't be for sure if these are auto set margins, but it sounds like they might be. If they are, first move the carriage as far to the right as you can. Hold the Left Margin Set (not Margin Release) lever as you move the carriage all the way to the left. Release the Margin Set Button or Lever. Now hold the Right Margin Set Button or Lever (not the Margin Release), and move the carriage all the way to the right while holding the Margin Set. Once the carriage is all the way to the right, release the Margin Set. Move the carriage to the place you want to set your left margin. Hit the Left Margin Set and then release. Move the carriage to where you want to set the right margin. Hit the Right Margin Set and release it. It gets confusing, but Margin Release does not set margins. Its sole purpose is only to bypass the margins. Hope this helps.

Posted on Jun 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Qu'est peut on faire si la machine ca,o, IR2318 donne erreur 0000007-0000


hello sorry but another time try to use the language which can easily be read and thats English back to the point the cause of that error is the rotation of the fixing film is detected.
The reading of the main thermistor is 100C or higher and, in addition, the fixing film sensor does not detect the rotation of the film for 6 sec or more while the fixing motor is driven try to check on that fuser film if the error persist change the fuser unit

Jan 13, 2017 | Office Equipment & Supplies

1 Answer

We have a fellowes shredder. It got full and jammed. After cleaning and emptying it will not turn on. Is there a reset button? Thanks. Betn


We've found that when the container is overfilled with shredded paper, it will begin pulling shredded paper back into the cutters and jamming the machine. Sometimes reversing the machine will spit the paper back up, but if it is thoroughly jammed, only way to unjam it is to UNPLUG it first, then manually remove the paper from the cutters. Then, be sure to dump the container BEFORE it is filled with paper.

...

Jan 12, 2017 | Fellowes Office Equipment & Supplies

1 Answer

HOW DO I un-lock the scanner on a Brother MFC 7420?


Unfortunately, the MFC-7420 doesn't have a physical lock switch. You need to turn off the all-in-one and wait for the unit to clear its memory. If the error recurs after you press the power button again, wait 30 minutes and try again. (Note: you will lose any faxes that are in memory. See the User Guide page 11-5 to save this information.) You can find the manual on the Brother support page for the MFC-7420: https://www.brother-usa.com/support/ModelInfo.aspx?R3ModelID=MFC7420 . Click on the Manuals & Documents tab. Then click on the Manuals on our Online Solution Center for the English version of the manual. The direct link to the User Guide is currently: http://download.brother.com/welcome/doc000387/ALLFB_UsaEngUsr_B.pdf .

You can also try unplugging the all-in-one for several minutes to reset the error codes. If the error persists, contact Brother if the MFC-7420 is still under warranty (1 year). If it isn't under warranty, consider replacing the unit. The repair costs may be unreasonable.

I hope this helps.

Cindy Wells

Jan 09, 2017 | Brother MFC-7420 Printer

3 Answers

How do i solve an error e000-0000 canon ir 2202 please


Dear
Its related to the fixing temp. do the error clear on service mode. then check the fixing film assy. heater circuit contact points for corrosion. Replace it.
Thanks.

Dec 12, 2014 | Canon Office Equipment & Supplies

1 Answer

Can i print Recipes & Instructions book


Yes you can! Here are a few sites for recipes. Kraftfoods.com, cookiefest.com, foodtv.com cookiesetc.com bonniescookies.com, ETC, If you want more recipe sites. Just type in on pc, what your looking for. Crafts, recipes, or what ever. My wife uses the recipes a lot. If you do not know how to make a certain thing, just type in search bar on pc. Hope this helps! Good-Day!

Aug 29, 2014 | Office Equipment & Supplies

1 Answer

We have forgotten the Administration password for our EStudio 350 & 450. Is there any way of resetting? Thanks Ben


The default password is either 12345 or 123456.
If neither of those work then, turn machine off then power on while pressing the 0 & 8 keys then enter 263, then press Start. It will then display the Admin Password.

Mar 17, 2014 | Toshiba Estudio 200L Copier

1 Answer

My DeVille 80 typewriter won't unlock and it's been like it for over 3 hours


Try to unplug for 30 min ,if still having problem go to mfg web site for instructions .

Feb 25, 2013 | Office Equipment & Supplies

2 Answers

We have forgotten the Administration password for our EStudio 350 & 450. Is there any way of resetting? Thanks Ben


restart machine ,then press the 0 & 8 keys,enter 263, then press Start. You should see admin password on the screen.

May 05, 2009 | Toshiba Estudio 200L Copier

2 Answers

HP printer psc 2210 all in one


Chances are that you didn't lock down the scanner when you moved the unit. You can attempt to open the unit and move the scanner bar manually to reset it. HPs are very difficult beasts when it comes to their power up check out. It must be fully functional...including all cartridges...to work in most cases. Good luck.

Dec 20, 2007 | Office Equipment & Supplies

2 Answers

Okidata Model# GE5253P


An online manual here: http://my.okidata.com/PP-ML320.nsf?opendatabase There is probably a top of form setting which needs to be checked & corrected. I assume you've checked tab/margin settings in your software & printer setup?

Sep 28, 2007 | Matrix Okidata Microline 320 Printer

Not finding what you are looking for?
Royal MS 25 Typewriter Logo

4,116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Royal Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

453 Answers

yadayada
yadayada

Level 3 Expert

68032 Answers

Jim Keysor

Level 2 Expert

325 Answers

Are you a Royal Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...