Question about Combination Televisions
Dvd not responding to any buttons on machine or remote.
Tv still working and responsive but dvd appears dead.
To Eject the DVD, my conia clcd1930 needs to be in "DVD" mode. This Mode appears to activate power to the entire DVD module. So the Eject button will only work in this mode.
Posted on Jan 30, 2011
Tips for a great answer:
Mar 25, 2013 | Combination Televisions
Mar 05, 2011 | Combination Televisions
Jan 09, 2011 | Toshiba MW20FN1 20 in. TV/VCR/DVD Combo
1000, 1003, 1004, 1005, 1006, 1007
.........................1019, 1096, 1098, 1099, 1100, 1101
.........................1102, 1103, 1129, 1179, 1181, 1187
............................................1188, 1190, 1198, 1199
1. Turn on the device to be programmed.
2. Look up the brand and code number(s) for the device on
the code list at the end of this section.
3. On your remote control, press and hold the device button
you want to program.
4. Enter a code from the code list.
5. Release the device button, and then press ON•OFF to
see if the device responds to the remote control
commands. If it doesn't, try pressing the device button
and then ON•OFF again.
6. If you get no response, repeat these steps using the next
code listed for your brand, until the device responds to
the remote control commands.
NB: Switch Off and On your TV with its front panel power switch each time [NOT BY THE REMOTE CONTROL HANSET], before you try an other code, UNTIL YOU GET THE RIGHT ONE.
Dec 20, 2010 | RCA 20F510TD 20 in. TV/DVD Combo
May 24, 2010 | Toshiba MW27F51 27 in. TV/VCR/DVD Combo
Oct 10, 2008 | Bush DVD142RC 14 in. TV/DVD Combo
Mar 03, 2008 | Combination Televisions
Jun 07, 2007 | Memorex MVT2135 13 in. TV/VCR Combo
158 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: