Question about Computers & Internet

2 Answers

Screen message states"no ati graphics driver is installed or the ati driver is not functioning properly .please install the ati driver appropriate for your ati hardware"

Posted by on

  • 1 more comment 
  • michael_hark Feb 19, 2009

    acer aspire m3200 quad core,purchased31/12/08 from **** smith electronics paraparaumu wellinton.--snptsanoxoo9823130d52701.I dont know if i have a ati video card or how to install the driver.

  • michael_hark Feb 21, 2009

    no further help required thanks

  • Art Ellison
    Art Ellison May 11, 2010

    Well, I would say that if you have an ATI video card, you need to install the driver for it.
    I cannot tell you what card you have unless you tell me what kind of computer you have. If it was a custom-built system, you will probably have to ask the person who built it or you will have to open the case and look at the card.



×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 530 Answers

Hi im josh in cebu phils. may i help you? friend your problem is your video graphics performance. You need to install your motherboard driver cd for your graphics if your video socket is built in on you motherboard. and if you are using video card not built in you pc.you need to install your video card driver cd. good luck!

Posted on Feb 19, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,229 Answers

Your computer uses ATI Radeon HD3200 graphics.
Look on the back of the computer and see if the monitor is connected in the same general area as the USB ports and other connections on the comptuer. If so, you have an on-board video adapter and must load the drivers from the motherboard setup disk. If you don't have one, you can visit this site and download them:
http://www.acerpanam.com/synapse/forms/portal20.cfm?website=AcerPanAm.com&siteid=7117&areaid=2&formid=3394

If the monitor cable is fastened to s separate connection that is further down the back of the computer all by itself, then you have a separate video card. If it came with the computer, you should have a driver disk for it.

Hope this helps.

Posted on Feb 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

9950 driver download for Windows 7 please.


Download the program (freeware) to find driver at http://driveridentifier.com/.Instal that program and let it to scan your pc and finally find the appropriate driver.

Dec 12, 2013 | ATI RADEON 9550 Graphic Card

1 Answer

Hey i have a HP laptop which is probly a few years old now and i went to turn my laptop on today and the screen would turn itself off just after the windows loading bar finishes loading. i can operate the...


If the Windows installation CD cannot detect the hard drive to install Windows then the hard disk could be faulty or it may only need reseating.
First - remove the hard drive and connect it back into the laptop.
2nd - Boot up the laptop and go into the BIOS configuration and check if the BIOS detects the hard drive.
If the hard drive is detected then proceed with the Windows installation.
If the hard drive is not detected in the BIOS then most likely the hard drive is faulty.
In this case you need to replace the hard drive before you can install Windows.

May 22, 2011 | Computers & Internet

1 Answer

I am using ASUS P5VDC-MX Motherboad with window 7 operating system and drivers are not install properly. window 7 transition effects are also deactivate. why ?


To ensure your system works properly, you will need to locate the drivers for your specific hardware. Your motherboard will have its own drivers, in addition to any expansion cards you have installed, such as a graphics card. Your motherboard drivers can be located at ASUS's website:

http://www.asus.com/product.aspx?P_ID=Wv3U3hfa7ZbODqSr&content=download

If you have not installed an expansion graphics card, and are using the one on your motherboard, this should fix the Windows 7 "transition effects." I believe what you are referring to is the Aero theme. If you are using an expansion graphics card, you will need to get the drivers from the appropriate manufacturer (generally NVIDIA or ATI). If the effects still are not working after you install the appropriate drivers for your system, you can right click the desktop, and click Personalize. This should bring you to a screen where you can choose an Aero theme.

Also of final note, the Aero effects are not available under Windows 7 Starter, so make sure you are using Home Premium, Professional, or Ultimate Edition.

Please let me know if you need any additional help with this. Thanks!

Aug 11, 2010 | ASUS P5VDC-MX Motherboard

2 Answers

Windows 7 - blue screen error: ati2dvag.dll


try to re-install driver of your video card , it should be supported by windows 7

Nov 09, 2009 | Microsoft Computers & Internet

1 Answer

I have a ati video card 9250 series. I tried


Try the drivers off this site:
http://www.omegadrivers.net/ati_winxp.php

Sep 27, 2009 | ATI RADEON 9250 256MB PCI (Retail) Graphic...

1 Answer

I've installed an ATI RADEON HD 4670. when i try to update the driver i get a message that there are errors in the installation process. When i try to play my game i get this message "failed to find...


Try this. Uninstall all ati drivers, then maybe you should use Driver cleaner pro to remove all driver components.
Install net framework 2, then install driver again.Good luck.

Aug 29, 2009 | ASUS ATI RADEON HD 4670,, PCI Express...

1 Answer

I have to install it after the comp. restarts useing device mananger /I will install from a specified location,the grahics card works in extended desktop mode untill the computer restarts then i have


What is your Operating System (windows version) ???


which version of the ATI RADEON do you have?

Go Here For Drivers.....http://ati.amd.com/products/catalyst/index.html

Apr 20, 2009 | Computers & Internet

1 Answer

Druid..


The standard VGA adapter comes automatically with the OS. You can try one thing...Go to device manager, find the entry for the Radeon card, and delete it. Next, shut down the PC and then restart the machine. The OS will automatically find and install the appropriate driver.

May 11, 2008 | ATI Mobility RADEON Graphic Card

2 Answers

I lost my cd that came with my radeon 9250 hardware


all u hav eto do buddie and u wann do is download latest version from www.ati.com ok under support 8.1 ect always update

Feb 03, 2008 | ATI RADEON 9250, (256 MB) PCI Graphic...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

621 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

101554 Answers

David Payne
David Payne

Level 3 Expert

14160 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...