Question about Sony KP-51WS500 51" Rear Projection Television

1 Answer

Picture is multi colored.Similar to a negative but with gree yellow blue red outer shodows

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 184 Answers

This is a convergence problem. In this TV, there are several parts on two different circuit boards that should be replaced. The convergence output ICs, a couple of fuses, a bridge rectifier, and a capacitor. This is expensive. Expect to spend $400-500 to have a service company fix it. Make sure that the company has Sony experience because if you do not replace all the affected parts, it will fail very quickly.

michtech

Posted on Feb 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tv screen when on turns yellow then after a while it will switch back to normal colors what can be wrong with it....


Televisions covered: all Projection with yellow picture, but not Projection TVs with a yellowish tint surrounding objects in a nearly normal picture.

Yellow = red + green
normal picture = red + blue + green (RGB). See illustration.

12_27_2011_5_00_56_am.png

Fig. 1 Additive color mixing in an RGB monitor, or RGB Projection TV.

The circuitry powering your blue output, or the blue light engine itself is starting to fail.

Operating Theory:

The lamp module shines a bright light into the optical unit; there are a series of lens and baffles, and at the top of the light engine, a lens puts the picture into a mirror which is reflected onto the screen; All video and color is processed thru the light engine. Blue most commonly fails first, leaving a yellow picture.

Dec 26, 2011 | Mitsubishi WS-55805 55" Rear Projection...

1 Answer

I have a mitusbishi ws-a65 hd 1080 tv. im having trouble getting the picture to line up with the shodows, its showing double, how can i fix this?


Your Convergence ICs have likely failed. It is very common on rear projections. Replace the STK chips, check fuses and the resistors next to the STK chips. Replace as necessary and re-align via the service menu.


Use this simple test to verify.
Go to the users menu on the tv.
Look for the converge option to align the red and blue colors

If you cannot move the red either horizontal or vertical, then the STK chip has failed for red section.
If you cannot move the blue either horizontal or vertical, then the STK chip has failed for the blue section.

If you can move both in each direction then the problem is something else.


Note if one STK chip fails, you replace both regardless. There may only be one STK chip in this set. If there are two, they will be right next to each other.

Feb 20, 2011 | Mitsubishi Projection Televisions

1 Answer

Screen hazzy and issue with blue convergence


bad convergence would cause show to look as if it was supposed to be a 3-d movie, if a bulb was going out then people would look purple blue -green,or some other off color, so likely the green bulb is going out from the color of the people you described.

Feb 06, 2009 | Philips 60PP9202 60" Rear Projection...

1 Answer

Color adjust


Greetings!

Adjusting the picture tubes is a scary proposition, but since you have already done it...
The easiest way to balance the gray scale is to turn the color all the way down on the set. The next part is easier with two people if the screen controls are on the back of the set. This is the part you saw that has six small knobs on it. There are control for the focus of the red, gree and blue and for the screen level of the red, green and blue. You will want to adjust the screen controls in an effort to get the picture black and white (this is why you turn the color down), hence the term "gray scale". Just make slight adjustments, take your and be patient. It will take some time, but you will get your picture balanced back out in time.

Hope this helps!
Rob

Jan 15, 2009 | Philips 50P8341 50" Rear Projection...

1 Answer

Blurry, Multi-Color, Multi-Line


covergence problems and its not adjustable you need work done on the convergence board or a new board and realignment which can be timely.

Nov 01, 2008 | Samsung DLP HL-P4663W 46" Rear Projection...

2 Answers

Picture calibration settings for 42lg70


Picture Menu
Picture Mode: Expert1
*Backlight: 16
*Contrast: 83
*Brightness: 53
Sharpness: 50
*Color: 55
*Tint: 0
Expert Control
  • Fresh Contrast: Off
  • Noise Reduction: Medium
  • Gamma: Medium
  • Black Level: Low
  • Real Cinema: On
  • TruMotion: Low
  • Color Standard: HD (N/A w/HDMI)
  • White Balance: Warm
  • **Method: 10-Point IRE
    • 10 IRE
      • **Red: 1
      • **Green: 2
      • **Blue: -16
    • 20 IRE
      • **Red: -6
      • **Green: 0
      • **Blue: -7
    • 30 IRE
      • **Red: -5
      • **Green: 0
      • **Blue: -4
    • 40 IRE
      • **Red: -8
      • **Green: 0
      • **Blue: -4
    • 50 IRE
      • **Red: -4
      • **Green: 4
      • **Blue: -4
    • 60 IRE
      • **Red: -6
      • **Green: 6
      • **Blue: -5
    • 70 IRE
      • **Red: -8
      • **Green: 3
      • **Blue: -10
    • 80 IRE
      • **Red: -8
      • **Green: 7
      • **Blue: -16
    • 90 IRE
      • **Red: -9
      • **Green: 5
      • **Blue: -18
    • 100 IRE
      • **Red: -10
      • **Green: 4
      • **Blue: -9
Color Management System
  • Red Color: 0
  • Red Tint: 0
  • Green Color: 0
  • Green Tint: -15
  • Blue Color: 0
  • Blue Tint: 11
  • Yellow Color: 15
  • Yellow Tint: 2
  • Cyan Color: -15
  • Cyan Tint: 0
  • Magenta Color: 0
  • Magenta Tint: -1

lg70 nice tv excellent processor just to bad there is no intensity control on color management oh well still better than what the three s are pushing block out the hype lg will be number 1 in a few years haters are starting to come around and well leds coming,

p.s. i dont work for lg just tired of losers bashing stuff because they dont own it.
im isf certified those settings are right on the money straighter than a ruler

Oct 05, 2008 | Projection Televisions

1 Answer

Yellow haze


The blue filter is burnt out. A very common problem in Zenith DLPs. There are 3 color filters, 1 blue (a pinkish color), 1 green (a grayish brown) and 1 red (it is red) they give you your colors for you picture. This is a simple fix.

Mar 23, 2008 | Zenith E44W46LCD 44" Rear Projection...

1 Answer

Yellow Haze Center Screen


The blue filter is burnt out. A very common problem in Zenith DLPs. There are 3 color filters, 1 blue (a pinkish color), 1 green (a grayish brown) and 1 red (it is red) they give you your colors for you picture. This is a simple fix.

Mar 19, 2008 | Zenith E44W46LCD 44" Rear Projection...

1 Answer

To many colors in tv double pictures red blue yellow


You have a convergence problem. It is a very common problem with projection TVs. It will have to be serviced by a technician.


C-Dog

Feb 10, 2008 | JVC AV-48WP30 48" Rear Projection...

2 Answers

Picture is yellow and green


Your missing the red drive on the set. Its most likly the picture tube. Its a possibility that the red drive circuit could be not working so the best thing to do is take off the gree picture tube socket and put the green board on the red tube. Of course do all this when the set is unplugged. if you have no tv experience. its not a good idea to be messing around inside of these sets.

Sep 02, 2006 | Hitachi 53UDX10B 53" Rear Projection...

Not finding what you are looking for?
Sony KP-51WS500 51" Rear Projection Television Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Projection Televisions Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

Ap12
Ap12

Level 2 Expert

103 Answers

Jason Harris
Jason Harris

Level 2 Expert

256 Answers

Are you a Sony Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...