Question about Maytag Performa PAV3200

1 Answer

Water fills but won't stop filling-overflows and won't spin out

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 99 Answers

This is joyce
You might want to check into the Valve that lets the water flow into the machine or it may be the switch that controls the water flow to the machine, it is either one of the 2. go to maytag.com and dowload your document to your machine type and see if you can get help.
let me know how it goes
thanks
joyce

Posted on Feb 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

In the begining of was the water won't stop filling, it overflows and it won't go to the wash cycle (adjetate) however I can turn it to the rinse cycle and it will drained and spins?


Possible that the water level sensor has failed.Shut down washer and trace the sensor which is a pressure activated switch from the drum overflow. the switch can be activated by blowing and checking continuity. if so replace the unit

Dec 30, 2012 | Whirlpool Washing Machines

1 Answer

Washing machine won't fill. i filled it by hand with water, it won't agitate either, only spins.


The inlet solenoid is probably bad. And it won't agitate unless it fills and stops filling automatically.

May 17, 2012 | Whirlpool Washing Machines

1 Answer

Kenmore washer 90 series continue to fill w/water. Load size won't stop the fill... had to shut off water source. won't get to agitate phase... just want to stay at fill stage... can drain, spin,...


Sounds like the fill switch needs to be replaced. A good way to test it is to set your machine on low fill and see if it fills past 3/4. If it does, it's the fill switch.

Aug 20, 2011 | Washing Machines

1 Answer

Water Overflows from washer


Hello,Sounds like a problem with either the inlet valve or the pressure switch, way to determine which on is while it is filling pull the plug..if water keeps filling it's the inlet valve..if it stops filling it's the pressure switch..If you have any other questions or concerns please feel free to comment again..good luck!! Mike

Aug 18, 2009 | Kenmore Washing Machines

1 Answer

Washing machine overflowing


the valve on your inlet pipe may be faulty, have the valve checked or buy a new valve, not very dear, around $30 australian

May 30, 2009 | Whirlpool AWZ412 Front Load Washer

2 Answers

Washer will fill fill with water but doesn't start wash cycle


it will fill but won,t spin, will throw out water as if it washed, then it take water to rinse but won,t spin ,then will throw out water as if it did , but clothes are soaked

Feb 21, 2009 | Roper RAS8445KQ Top Load Washer

1 Answer

Water does not shut off!!!


Check the timer in the back behind your knobs make sure it is working. That timer times how long for the water to run on all your settings and for everything else

Feb 09, 2009 | Frigidaire FEX831CS Top Load Stacked...

1 Answer

Water Just Keeps Filling!


replace the water inlet valve, the valve that the black hat and cold lines connect to

Apr 19, 2008 | Kenmore 3.5 cu. ft. King Size Capacity Top...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...