Question about Kenmore Dishwashers

1 Answer

Dishwasher not starting right away

When i start dishwasher the lights come on but only for about a minute an then shut off, if i shut door real hard an press button it seems to solve the problem , feels like the latch is not catching

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Sounds like the door switch needs adjusting, or maybe the door catch

Posted on Feb 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Samsung Dishwasher, model DMR78AH5 will not run. The heavy, delicate, quick and smart lights are permanently on. I cut off the breaker for one minute but that did nothing.


How to Fix a Dishwasher That Won't Start ' Dishwasher Repair

www.partselect.com/Repair/Dishwasher/Will-Not-Start/
If your dishwasher won't start the problem could be the door latch or door latch ... On manual timer models the timer is used to supply power to the pump motor, ...Missing: samsung ‎dmr78ah5

Samsung Dishwasher Won't Start - Model DMR57LFS ...

www.repairclinic.com/...Dishwasher/...-/Samsung-Dishwasher-won-t-start...
The door latch ensures that the dishwasher door latches shut. If the door does notlatch properly, the door switch might prevent the dishwasher from running.

What to Do When the Dishwasher Won't Start - YouTube

? 5:43
https://www.youtube.com/watch?v=L-bMqVb9kX0
Aug 15, 2013 - Uploaded by doityourselfstan
The problem could simply be a blown thermal fuse inside the control panel. ... Maytag Dishwasher Repair ...

Dec 16, 2015 | Samsung Dishwashers

1 Answer

Elctrolux dishwasher won't start, display won't light. Any suggestions?


Good Morning Friend,

I understand your Electrolux dishwasher, model# EWDW6505GS, seems like it is not receiving power to the control panel. I suggest resetting your appliance, by either unplugging your appliance or shutting the power off at your home's circuit breaker, for 20-30 minutes. Restore power and try any cycle. If you are still not receiving any lights, I suggest contacting your local authorized technician for further assistance. They will be able to diagnose your appliance and determine what is causing your control panel to not have power.. Hope this is helpful.

-Best Regards-
WP

Jul 04, 2014 | Electrolux EWDW6505GS Fully Integrated...

2 Answers

Blinking lights on frigidaire dishwasher


Hello - Try resetting the dishwasher by disconnecting the power to the unit. This will clear most flashing lights. You can disconnect power by flipping the circuit house breaker off and back on for approximately two minutes. If this does not prove to be successful, contact a professional to move forward accurately. Dishwasher could possibly have a faulty control board or wiring failure.

Oct 10, 2012 | Frigidaire 24 in. PLD2850 Built-in...

1 Answer

Wont start


We walked away from it for about an hour, came back, reset it, and it started. Thank you.

Jun 11, 2009 | Kenmore 24 in. 16022 Built-in Dishwasher

1 Answer

Kenmore Dishwasher 5871525 stops running after a few minutes


sounds like a stuck key pad since you said the normal wash button flashed.. the other thing is try holding the door shut while you run it.. to see of it is maybe not latching properly..

Apr 10, 2009 | Kenmore 15762 Dishwasher

2 Answers

Kenmore Elite Dishwasher clean light ind flashing and won't start


You will have to reset the console. To do this, close the door and press these buttons in sequence...

-high temp wash
-heated dry
-high temp wash
-heated dry

...all the lights will turn on briefly and the machine will start a diagnostic cycle. You can press cancel or let the diagnostic cyle finish (1-2 minutes).
You should now be able to run the dishwasher as normal.

Feb 17, 2009 | Kenmore 24 in. 15142 Built-in Dishwasher

1 Answer

Timer on dishwasher not working


ok start the washer after it fills and starts washing open the door again and turn the dial to drain shut the door see if it drains if it does then open the door and turn it to heated dry shut the door and get you a small glass of warm water let it sit in heated dry for about 3 minutes open the door and pour the water on the heating element and let me know if it sizzles

Mar 27, 2008 | Dishwashers

1 Answer

My dishwasher shuts itself off


The lights will typically blink when the door comes open. It may be that when the washer warms up, parts of it expands and allows the door to open slightly. It may also be that the trigger that registers the door being shut is not being tripped.

Aug 03, 2007 | Frigidaire 18 in. FDR252RB Built-in...

1 Answer

Wont start


The lights flash when the door is not shut all the way, or the sensor that detects that the door is shut is not sensing the door is shut. Try pushing in on the door while hitting the start button.

Feb 13, 2007 | Frigidaire 24 in. FDB1051RE Built-in...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Fred Sops

Level 2 Expert

271 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Raisin Brann

Level 1 Expert

28 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...