- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
In the user manual page 109 it says, when the camera reports a focus error, switch off the camera and after a few seconds switch it on again. If the error persists, contact a Fujifilm dealer.
I hope you checked the battery is full and you did not switch to a manual mode. Check the settings if they are what you thing they should be. It happens to me, that my camera wont do what I want, because I hit a rail, causing the settings to be different from what I thought and wanted.
If you say that the camera was making a grinding sound before it quit working the grinding noise should have been looked at then, cameras do not make grinding sounds if they are working properly. the sound is the drive unit going bad and that is why you are now getting the focus error because the drive unit has quit working completely !!!! It is now time for the shop.
I have this problem also with Fuji Z90 model. Problem is fixed and focus now working ok. Camera is fall down and after when camera was started giving sound click click from focus big motor and error on screen Focus error Focus ( lens ) was open ( small cover on top bellow sticker ) Small "snail" gear is taked out . Two sliding segment adjusted
for focus ( upper full up and lower full down - beware about spring inside below this focus pins )and snail is inserted back. Camera started and focus start
working. I need to make small adjustment . Reason when camera is
started picture is not clear and before using camera i need to do full
zoom in and back zoom out. After this picture is crystal clear and all
Try removing the battery/batteries and clean the contacts underneath. Also, clean the battery contacts and the charger, if so equipt. To do this, dampen a cotton swab with rubbing alcohol and rub the contacts. Blow into the compartment after to clear any residue.Thanks, Dana
Try resetting all features back to default to see if that will clear it up. Your manual will have these instructions.
otherwise you can check out this repair https://www.teleplancamerarepair.com/quote/cart.asp?iProbID=33&mo=96
error codes are quite common in most cameras and they all have different meaning. this is a great camera by the way.
I am sorry that I can not tell you exactly what that code means, Sony only releases the complete list of error codes to their employees. What I can tell you is that many error codes can be clear by reinitializing the camera’s internal software. In the Menu select Initialize.
If resetting the program does not clear the error then it’s a hardware problem. In the USA this camera has a 1 year warranty. Contact Sony repair at http://www.sony.com/service or 1-800-222-SONY (7669).