Question about Planar PE191M 19" Flat Panel LCD Monitor

Open Question

Drivers for the Planar PE191M Monitor cannot find any drivers for this even on Planars website

Posted by on

3 Suggested Answers

  • 130 Answers

SOURCE: Planar Monitor Wont stay on

Okay.... If you can. install your drive. It may work. If not then your Hardware in your monitor is screwed. Or maybe something else but not to my knowledge.
good luck!

Posted on Jul 14, 2009

annual_uk1
  • 70 Answers

SOURCE: Planar PE191M monitor display will not stay on

iv come across this before sometimes people can see that the monitor is actually working but the light has gone out id say bad capacitors that are breaking down. if you want to DIY it take it apart and find the light pcb usually built on the power supply pcb and look for bulging or swolen capacitors this happens alot in my opinion. if you can DIY it get the same caps or same value but better ones. I might be wrong but worth a look

Posted on Aug 22, 2009

budmrtn
  • 11361 Answers

SOURCE: Planar Pe191m goes dark image seen with flashlight

I would suspect either the power suuply or inverter circuits, look for bad caps first which is common problem, see example of failed monitors due to bad caps: http://s807.photobucket.com/home/budm/allalbums
If you want replacement lamp, you can look here, it also gives you info on how to measure the lamps dimensions: http://www.lcdparts.net/

Posted on Mar 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a driver for a px2710mw planar monitor


Monitors use your video drivers it should work as soon as you plug it in...
  • Is it connected properly?
  • Are you drivers up to date?
  • Are you using a video card?

Aug 09, 2014 | Planar Px2710mw Lcd Monitor 27 1920 X 1080...

1 Answer

Planar Pe191m goes dark image seen with flashlight


I would suspect either the power suuply or inverter circuits, look for bad caps first which is common problem, see example of failed monitors due to bad caps: http://s807.photobucket.com/home/budm/allalbums
If you want replacement lamp, you can look here, it also gives you info on how to measure the lamps dimensions: http://www.lcdparts.net/

Mar 08, 2010 | Computers & Internet

2 Answers

Won't stay on. When the power is turned on, an


Make sure you video cable from the computer is seated in correctly.

Dec 29, 2009 | Planar PE191M 19" Flat Panel LCD Monitor

1 Answer

Same issue, screen comes up for 2 seconds then blacks out


plug the screen into another pc, laptop, whatever you can find. if it still does it its the screen, if not its your video. could be a power cord, but usually not. if cheap it may be worth a gamble.

Aug 22, 2009 | Planar PE191M 19" Flat Panel LCD Monitor

1 Answer

Planar Monitor Wont stay on


Okay.... If you can. install your drive. It may work. If not then your Hardware in your monitor is screwed. Or maybe something else but not to my knowledge.
good luck!

Jul 14, 2009 | Planar PE191M 19" Flat Panel LCD Monitor

1 Answer

Screen goes black after 2 seconds


This could be one of two problems, the light in your monitor has a loose cable, or the light is dying. I have seen cold cathode lights that are about 10-15$ to buy and many instructions on putting them in yourself.

Solution 2, your cable is loose on the back of the monitor. Make sure you have the screws tightened on either side of the vga or dvi cable, both on the back of your monitor and on the back of your computer or laptop.

Jun 28, 2009 | Planar PE191M 19" Flat Panel LCD Monitor

2 Answers

Planar PE191M monitor display will not stay on


iv come across this before sometimes people can see that the monitor is actually working but the light has gone out id say bad capacitors that are breaking down. if you want to DIY it take it apart and find the light pcb usually built on the power supply pcb and look for bulging or swolen capacitors this happens alot in my opinion. if you can DIY it get the same caps or same value but better ones. I might be wrong but worth a look

Apr 01, 2009 | Planar PE191M 19" Flat Panel LCD Monitor

1 Answer

Internet Video Security Camera


Hi...there,
It's seems you got a settings problems. Read your manual again and go over step by step...see which settings you are missed. Make sure the cam are turn on...before you can remote view it.

Nov 30, 2008 | Planar PE191M 19" Flat Panel LCD Monitor

2 Answers

Sceptre X9G-Komodo IV


I recently came accross one of these monitors (Planar PE191M) with the identical issue. The resolution was to replace the two 470ufd 25V capacitors that are located on the main power board. The main power board also contains the audio circuit and more importantly the inverter circuit that drives the CCFL backlighting. The suspect caps were identified using an ESR meter; if you happen to have one of these meters you can confirm this is the issue with your unit(s), alternatively you can just replace the two capacitors and see if it resolves your issue. Hope this info helps someone out there.

Sep 05, 2007 | Sceptre X9G Komodo IV 19" Flat Panel LCD...

Not finding what you are looking for?
Planar PE191M 19" Flat Panel LCD Monitor Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Planar Computers & Internet Experts

Clive Gray

Level 3 Expert

1479 Answers

Joe Goldman
Joe Goldman

Level 2 Expert

335 Answers

William Miller
William Miller

Level 3 Expert

9042 Answers

Are you a Planar Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...