Question about Kyocera Finecam M400R Digital Camera

1 Answer

Kyocera finecam 410 "cover open"

My Kyocera finecam 410 shows "cover opened" -- when the SD cover is closed and the SD has been clicked into place. -- Any one have any suggestions OR Does any one know of a repair shop that I can send it to -- Precison Camera won't handle it.I have check covers to all ports.

Posted by on

  • tecayten Feb 19, 2009

    Thnaks alot --I actually came up with a similar solution using a paper clip to push in the contact button -- i may have to use the wadded up paper trick or something similar if the button keeps popping out.

    Thanks again


×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 180 Answers

I had a camera that did the same thing. on mine there was a little tab on the memory card cover door thing that pushed a little button. i think a piece of the little tab on mine broke off so it wasnt pushing the button so i took a little piece of paper or something and folded it really small and set it on top of the little button thing and then closed the door and that worked for me

Posted on Feb 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kyocera eroor code c-6000


Works with ERROR C6000, C6300, C6400

Switch off
Open Toner Cover
Switch on, holding "System Menu"
Go to "Secure Setting"
"Enter"
Hold "Start" "#" "Enter"
Scoll down to "Maintenance Mode"
"Enter"
Scoll down to "U163"
Scoll do "Execute"
"Enter"
Close Toner Cover
Leave run for a few seconds
Switch off
Switch on....

May 04, 2014 | Kyocera Mita 2 Pack Km 2020 2035 2050...

1 Answer

Why is my camera stating write protect?


Look at your memory card. SD and SDHC cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

May 26, 2012 | Kyocera Finecam S3X Digital Camera

1 Answer

Kyocera M410 resets date and time when changing batteries


There are tiny Li batteries to maintain the short term memory for interim period. Normally they last very long but unexpected can be expected. You may not have enough tools to open it & reach there. Either go to camera repair or just entering it everytime or give it to the kids & buy new one instead of repair.. aqeelhafeez@hotmail.com

Mar 26, 2010 | Kyocera Finecam M410R Digital Camera

1 Answer

I have just bought a 8GB Panasonic memory chip for my Kyocera Finecam M410R camera. But it comes up with card error on it. I put back my little old 124mg card and it is fine. Can I use a panasonic card...


The brand isn't important. The 8GB card is an SDHC(secure digital high capacity) card and the smaller one is an SD. Your camera may not be able to use an SDHC card. Try formatting it in the camera before giving up on it.

Feb 14, 2010 | Kyocera Finecam M410R Digital Camera

2 Answers

I am getting Call Service 7410:00 32266 on FS-3900DN Kyocera Laser Printer.


You have pulled the drum unit out of position possably after changing the waist toner ? Open the back cover, open the frunt cover and remove the developer unit, the full unit not just the toner, open the side cover where the waist toner bottle is and push the drum unit back into place until it clicks, put the dev unit back in place and close everything reboot the machine

Apr 18, 2009 | Kyocera FS-3900DN Laser Printer

1 Answer

UNSUPPORTED FORMAT


Since this camera is fifteen years old, and is long discontinued, it is unlikely that spares will be available for it. The camera shop gave you the most cost effective advice.

Apr 08, 2017 | Kyocera Finecam S3L Digital Camera

1 Answer

Kyocera Finecam S5R digital "flash close"


You forgot to open the shooting flash on the top of camera

Nov 24, 2007 | Kyocera Finecam S5R Digital Camera

1 Answer

"Cover opened" error message


Defective mechanism, a stucked mechanism is present. camcorder are smart it can detects error and shuts down itself for safety. earlier models dominoes the defect if the user is not quick enough to react when something goes wrong with the camera. You need professional service to fix it.

Sep 14, 2007 | Kyocera Finecam L4V Digital Camera

Not finding what you are looking for?
Kyocera Finecam M400R Digital Camera Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Cameras Experts

kakima

Level 3 Expert

102366 Answers

Brad Brown

Level 3 Expert

16155 Answers

Iqbal Husain
Iqbal Husain

Level 3 Expert

655 Answers

Are you a Kyocera Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...