a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It sounds like you have two accounts. I see one which is Debbie Rovers DeBonis and one which is Deb DeBonis. The profile pic is One Force One Fight and you have 58 friends and a niece April. Debbie Rovers is in New Jersey. There are no 'Deborah DeBonis' listed.
The first thing I would suggest you do is to clear your temporary Internet Files and Cookies. Reboot your computer or phone and log in again.
Forgive me as I'm not too educated on the configuration of this saw but when I heard you mention armature replacement it made me think....are there armature brushes that are worn out. I know a lot of my angle grinders spark, get real hot, and smells like burnt plastic when brushes are worn out. Are there brushes on this saw? Just a thought.
Hi, In this situation many possibilities could be there like:but one thing is sure that the area of problem is "Vertical Section" 1-PF could be short/open 2- Collector volts are not present due to open/short 3- Capacitor could be popped. If you are tech person then check the Vertical Section and you will find the caused component. And if you are not an expert then i suggest you to contact any expert because fault finding is a bit difficult and can only perform by an expert. Thanks for using fixya.
First do not panic! It is possible to recover your pictures if you take care. Take the card from the camera (powered off)and if it has a "write protect" tab then lock it now. Do not try and write anything to the card or you risk causing more problems.
If you are comfortable with using a PC then you can download a FREE utility that will recover your photos from the following link:
If you need something a little more "user friendly" then you will need to buy the software. If you search the web for photo recovery software you will find many.
One I have used successfully is RescuePro that used to be bundled with some Sandisk products. Now you can get it from the link below:
You can try the demo to see what you can recover before buying.
Remember - Do NOT try & write anything back to the card until you can recovered your pictures to your PC safely!
Please update the question & let us know if the information given was useful to you - Good Luck!
greeting from belize i have never heard about a tv freezing only a computer or a dvd. dvr vcr.however your problem is the color chip on your circuit board it needs to be replace take it to a tech to have it replace it will cost you about $80.00 to repair.good luck.