Unit is a Sony DVP-NS715P, ser no 2026425 2b, that only plays some DVD's. The girl I'm looking at it for said it only plays one disk, but I could only get it to not play one of my disks, and it played all others normally. I know the DVD it doesn't play is good, the player's lens is completely clean, I cleaned it with good isopropyl just to be sure, still the same thing. It searches the disk for a while, and then says the disk cannot be played. Any idea what sort of problem this is? All help appreciated, as always.
-   Will not play any disc, will try and load(loading) for around 2 minutes than say -cannot load this disc-we have tried numerous disc's that play on our other DVD player
Tried disconnecting power and tried to load laser disc cleaner-will not load.-   k10racer
Solution #1
posted on Aug 01, 2007
jessie25 - usenet poster
Rank: Apprentice
Rating: 0%, 0 votes
I don't think so. FWIW, you could probably still use it as a CD player or MP3 player or picture CD player. It may even play burnt single layer DVDs without problems.
-- Franc Zabkar
Please remove one 'i' from my address when replying by email.
Was this helpful?
Yes
No
Solution #2
posted on Aug 01, 2007
Lizzy - usenet poster
Rank: Apprentice
Rating: 0%, 0 votes
The one disk it didn't play is in fact a dual layer DVD. I'll test it more later and see if this holds true. If this is the case, is there anythng that can economically be done? Steve
Was this helpful?
Yes
No
Solution #3
posted on Aug 01, 2007
Duke - usenet poster
Rank: Apprentice
Rating: 0%, 0 votes
I bet it plays single layer discs but has trouble with dual layer ones.
-- Franc Zabkar
Please remove one 'i' from my address when replying by email.
Was this helpful?
Yes
No
Solution #4
posted on Aug 01, 2007
Lizzy - usenet poster
Rank: Apprentice
Rating: 0%, 0 votes
Thanks for the reply. I just found out that she had used this player very much in the last three years, 3 to 4 hours a day not uncommon, so I imagine it's highly likely that the laser is at the end of it's life. Thanks again, Steve
Was this helpful?
Yes
No
Solution #5
posted on Aug 01, 2007
Phoebe - usenet poster
Rank: Apprentice
Rating: 0%, 0 votes
Some of the Sony models have been having problems with the laser units. The practical side of things is to make sure it can travel freely, and that the lens is clean. If the laser is defective, this will be too expensive to replace.
--
JANA
... Unit is a Sony DVP-NS715P, ser no 2026425 2b, that only plays some DVD's. The girl I'm looking at it for said it only plays one disk, but I could only get it to not play one of my disks, and it played all others normally. I know the DVD it doesn't play is good, the player's lens is completely clean, I cleaned it with good isopropyl just to be sure, still the same thing. It searches the disk for a while, and then says the disk cannot be played. Any idea what sort of problem this is? All help appreciated, as always.
sony DVP-NS55P dvd player i am having trouble with it playing any disc it will say loading for 2 min...
(More)
sony DVP-NS55P dvd player i am having trouble with it playing any disc it will say loading for 2 min then display cannot play, i have opened the unit up cleaned the lens multipul times, sometimes it will work for a little bit then freeze and i have to have it reload and it will go back to cannot play
i have a sony dvd player and would like to use my ge universal remote,but i have lost my list of...
(More)
I HAVE A SONY DVD PLAYER AND WOULD LIKE TO USE MY GE UNIVERSAL REMOTE,BUT I HAVE LOST MY LIST OF CODES.
when i insert some original dvd , in the player its showing "cannot play" and on tv its...
(More)
when i insert some original dvd , in the player its showing "cannot play" and on tv its showing "problem in area limitation", so pl send the changes to do , to solve the problem the player is ntpc format which i purchased in "usa" but i am using in india.
We are unable to use this player as the unit initially powers up then 10 seconds later powers down....
(More)
We are unable to use this player as the unit initially powers up then 10 seconds later powers down. What can I do to fix?