Question about Kenmore 62602 Electric Dryer

1 Answer

Where to reconnect yellow-red wire on series 90 heavy duty

Working on a repair to my series 90 heavy duty dryer, ultrafabric care. I can't figure out where to reconnect the yellow wire with a red stripe that goes from the electronic control to the moisture sensor. I'm stuck at where to connect this wire coming from the moisture sensor. Thanks.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kenmore Master
  • 8,147 Answers

At about the 4 oclock position look had for a male spade clip mounted between the inner and outer front panel. Look inside the panel and you will see the metal stripes below the filter that collect the wetness data from the clothing as it tumbles past. Great question! Post your model number to any of these fine forums for
a simple answer that will save you lots of money:
http://appliancejunk.com/forums/index.php?referredby=858
http://forum.appliancepartspros.com/
http://applianceguru.com/

Posted on Feb 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kenmore ultra fabric care heavy duty 90 series soft heat i will not come on hum not nothing


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

][][\

Aug 28, 2011 | Dryers

1 Answer

I have a Kenmore 80 series Heavy Duty Quit Pak Dryer and it won't turn on. No sound or anything


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101


';';' ';

Jun 27, 2011 | Kenmore Dryers

1 Answer

I HAVE AN OLDER MODEL KENMORE DRYER MODEL NUMBER 86872800 AND A NEWER HOME HOME WITH 4 CONNECTORS DRYER HAS ROOM FOR THREE HOW DO I CONNECT NEW CORD


You have to replace the dryer's 3-prong cord to 4-prong. Get yourself a 4-prong cord then on the terminal block at the rear of the dryer, connect the wires of the 4-prong cord to where the same wire colors (red, black, and white) of the 3-prong cord connects to. The only modification needs to be done is on the green/yellow stripe wire that connects from the white wire terminal to the dryer's cabinet. Remove this wire (green/yellow stripe) from the white wire terminal then connect it to the same wire color (green/yellow stripe) of the 4-prong cord and you are done. The new wire configuration would then be red, black, and white on the terminal block and green/yellow stripe wire on the cabinet.

Jun 16, 2011 | Dryers

1 Answer

My Kenmore Series 90 heavy duty gas dryer does not heat.


Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.



if you dryer is gas check out this gas no heat tip....



If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.



check out this electric no heat tip...


heatman101

Feb 19, 2011 | Kenmore Dryers

1 Answer

Have a Kenmore 70 Series, Heavy Duty Dryer. Push the on button to start, nothing happens.


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Sep 19, 2010 | Kenmore 700 6972 Dryer

1 Answer

Capacity of Kenmore Model: 110-9155120 Washer and 97566200-75662


3.6cu ft.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Mar 30, 2009 | Whirlpool GEW9250 Electric Dryer

1 Answer

Motor removal and replacement on a kenmore electric dryer 90 series model# 110.86984110


remove screw at each end of console. pull & flip back out of way. remove top, remove bottom panel, slide putty knife to release both retainer clips. remove screws to remove door panel assy. remove belt, remove drum. remove motor clamps & remove wires from motor conector.good luck.

Aug 07, 2008 | Dryers

Not finding what you are looking for?
Kenmore 62602 Electric Dryer Logo

365 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...