Question about Smith Corona Wordsmith 200 Typewriter

4 Answers

NEED OWNERS MANUAL FOR A SMITH CORONA PWP 3850

PICKED THIS THING UP AT A THRIFT STORE WORKS GREAT AS A TYPEWRITER BUT HAVE NO CLUE HOW TO MAKE IT WORK LIKE A WORD PROCESSOR. NEED A INSTRUCTION MANUAL. THANKS

Posted by on

  • Anonymous Mar 01, 2009

    did you ever figure out how to install correction ribbon? How about word process? What about a disk? Do you need one. Thought maybe you may have found solutions. I have same problem .... I have a PWP and no manual

    If you cna help please reply to arecon@earthlink.net and put smith corona in subject line

    Thanks

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

(You probably need the monitor to go with it.)
Have manual (over 190 Pages), plus Spreadsheet manual that goes with it. Haven't used for some years but put my 3.5 disks in and was able to read them from the monitor and print them again; didn't print alot as didn't want to use up the ribbon ink-yep, it still worked!

Posted on Jun 18, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 279 Answers

Could not find the manual. Sorry. Have you called them?
1-800-448-1018
Or email mailto:consumeraffairs@smithcorona.com

Posted on Sep 20, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 566 Answers

Posted on Sep 08, 2009

×

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 45 Answers

Try Will Repair Service for a manual.

(Click on "Will Repair Service" above to go to the manual web page.)

Best of luck!

Posted on Jun 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 324 singer memomatic. Carriage is stuck solid and won't move. It has been stored for a long time. Is it possible to get the carriage off in this instant if so how?


First are you referring to all internal carriage working parts or just bobbin workings ? I just got done last nite with a Kenmore that was sitting who knows how long and was completely froze internally and bobbin area covered with green muck . After cleaning that up still froze ,oiled any and all mechanical points and rocking back and forth about to give up ,found one more location on back of machine ,oiled heavy and began turning very hard over and over and became loose enough for motor to turn . So don't give up . Good Luck .
Regards , Douglas

Jan 13, 2017 | In Office Equipment & Supplies

2 Answers

How do I replace the pf kit on a brother mfc-9325cw. I have the replacement parts.


Laura, you get the necessary tools, get access and remove the old parts and replace with new ones. Make sense?

Jan 10, 2017 | Brother International Brother MFC-9325CW...

1 Answer

I need a Ricoh MPC3002 Owners Manual?


Try Googling (ricoh)(MPC3002)(manual) without parens.

Jan 09, 2017 | Ricoh Office Equipment & Supplies

1 Answer

Where can I purchase a drive gear for a Bosser 160X paper shredder?


i am needing the same plastic drive -pinion gear.... mine is stripped and i can t find ANY searches for parts or a Service manual with a parts diagram blow up.. Does anyone have a clue how to get a new gear??

Dec 05, 2016 | Office Equipment & Supplies

3 Answers

How do I get msds sheet for this product?


If whoever made that product made an MSDS sheet, then it could be listed in the following database: http://www.msdssearch.com/msdssearch.htm.

Feb 26, 2015 | Seiko Smart Label 420 Thermal Printer

1 Answer

My DeVille 80 typewriter won't unlock and it's been like it for over 3 hours


Try to unplug for 30 min ,if still having problem go to mfg web site for instructions .

Feb 25, 2013 | Office Equipment & Supplies

2 Answers

I can't figure out how to feed paper into the printer


hello

i assume you refer to ML591, dot matrix ?

go to this link, and download users guied and/or manual http://my.okidata.com/PP-ML591.nsf?opendatabase

how feed the paper http://my.okidata.com/PP-ML591.nsf?opendatabase

Jan 11, 2011 | Okidata 591 Printer

2 Answers

Okidata Microline 30 Turbo dot matrix


The problem your having is a spacer motor. It's located under the carriage that holds the ribbon/printhead. The part number is 56513701. Available at Seattle Platen - Dale 1800-221-2388.

Here's a free copy of the Okidata 320T service manual that will walk you through testing and verfying before ordering the replacement part.

If this helped you, please hit me up with a FIXYA. Thanks.

http://www.feedroller.com/Store/Service%20Manual/SER320T.PDF

Aug 30, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

2 Answers

HP printer psc 2210 all in one


Chances are that you didn't lock down the scanner when you moved the unit. You can attempt to open the unit and move the scanner bar manually to reset it. HPs are very difficult beasts when it comes to their power up check out. It must be fully functional...including all cartridges...to work in most cases. Good luck.

Dec 20, 2007 | Office Equipment & Supplies

2 Answers

Okidata Model# GE5253P


An online manual here: http://my.okidata.com/PP-ML320.nsf?opendatabase There is probably a top of form setting which needs to be checked & corrected. I assume you've checked tab/margin settings in your software & printer setup?

Sep 28, 2007 | Matrix Okidata Microline 320 Printer

Not finding what you are looking for?
Smith Corona Wordsmith 200 Typewriter Logo

515 people viewed this question

Ask a Question

Usually answered in minutes!

Top Smith Corona Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

453 Answers

Jim Keysor

Level 2 Expert

313 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a Smith Corona Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...