Savin SLP 38C

Google search results:

http://www.copytechnet.com/forums/ricoh-savin-gestetner-lanier/111635-sc-187-error-code.html

https://printcopy.info/?l=en&mod=erc&brand=Ricoh&model=Aficio%20MPC4503SP&code=SC187-00

http://www.copytechnet.com/forums/ricoh-savin-gestetner-lanier/62104-ricoh-pro-c-901-a.html

http://www.copytechnet.com/forums/ricoh-savin-gestetner-lanier/62104-ricoh-pro-c-901-a.html

http://www.copytechnet.com/forums/ricoh-savin-gestetner-lanier/96767-ricoh-sg-3110sfnw-showing-sc28211-error-code.html


Did not report a solution, but quoting from link above:

Ricoh Sg 3110sfnw showing SC28211 error code
Ricoh sg3110 sfnw showing sc28211 error code.
In trying to Execute carriage change sp mode (3-009-002), I cannot find 'Engine setting' (which according to the service manual) supposed to be under 'Printer setting' menu from Service mode.
Can someone help on step-by-step procedure of getting to the "Engine Setting" (sp mode) menu please in case am omitting something along the line or is their a permission required?

Hello.
That error is related to TD sensor error.
I advise you to call a trained Technician

Here's a movie that show you how to fix it:

Ricoh Error Code SC541 sc542 sc 543 sc544 sc545 sc546 Lanier Savin...

There's a video showing how to clear SC error codes: Resetting Ricoh Savin Lanier SC Error Code There's also a discussion here: Thread Ricoh Aficio 220 error SC392

Ink head temperature sensor. replace the sensor

Unfortunately, I've never seen this error, so I can't give you much help beyond what the code means and the possible solutions that the service manual provides...

SC820:
Self diagnostic error: CPU - Unexpected external error or interrupt occurred.
• Controller board defective
• Software defective

The manual indicates this is a "C" type code, so this should not be displayed on the OP panel, only logged in the SC history in the machine.

That code is related to the scanner unit.
Probably after they move the machine the lamp went out of position.
I advise you to see the all scanner; Lamp, Mirrors, White plate...

you have an over heat error. you need to test your thermistors, s and lamps for continuity.replace bad parts. then you need to go to service mode and reset the code